You’re Not Seeing Double: RGB Christmas Trees

December 25, 2009 by Jake W 30 Comments

[youtube=http://www.youtube.com/watch?v=GAt6A98lXQw]

[mrpackethead], created this monster of a tree. As shown in the video, it’s capable of showing animations, patterns, and potentially video. The 6m tall creation is studded with 2000 waterproof RGB LED modules. Software for the tree was written in Apple’s own Quartz Composer and integrated into Madrix, a piece of software designed with the purpose of controlling LEDs. The 600W system is 100% Arduino-free and costs less than the equivalent of 0.04USD per hour to run in New Zealand.

[Geoist] opted for the Arduino way to rig up his own smaller RGB Christmas tree. Finding a slightly kitschy fiber-optic model in his local department store, [Geoist] was eager to harness its colour-changing powers. Upon opening it up, it was discovered that it was controlled by nothing more than a light bulb and a spinning disk of coloured light filters. [Geoist] gutted the setup in favour of a breadboard with 3 RGB lights hooked up to an Arduino. The sketch for it is available on his site.

Choreographed Christmas Light Show (x4)

December 24, 2009 by Jake W 20 Comments

[youtube=http://www.youtube.com/watch?v=GeAwYmQOf3g]

[Lucas] is at it again this year. Not satisfied by the computerized systems available on the market, [Lucas] decided to build on last year’s project. To save a bit of cash, he built the setup around Parallax’s low-cost SX28 proto board. The system is capable of controlling 102 channels, with 8-bit dimming. 6 boards control 7 channels each and are communicated to through a serial protocol (reducing the whole setup to only 36 feet of wiring).

More importantly, he’s teamed up with 3 other neighbors who also share a passion for outdoor Christmas lighting and they’ve put together the Christmas Tour of Lights. Money raised from all donations goes directly to the St. Jude Children’s Reasearch Hospital in Memphis, Tennessee.

Modular Systems Using SPI

December 22, 2009 by Mike Szczys 5 Comments

[Humberto] is at it again with a NerdKits video detailing the use of an SPI bus to communicate between microcontrollers. He started with a previous LED marquee project which was limited to a 5×24 LED Matrix and developed a modular solution to increase the size limitation.

The writeup and video embedded after the break do a great job of detailing the important differences between a stand-alone and a modular system. The good news is that the ATmega168 chips being used have a built-in interrupt based SPI protocol. Once wired correctly, a master control chip addresses each module separately, adding data to their buffer until a full frame has been transferred, then moves onto the next module.

Some of the caveats to this system such as digital transmission over long distances are discussed. We do wonder about power limitations if all LED’s in the marquee are illuminated at once. But that concern aside, if you’re thinking of playing around with an LED display don’t forget that there’s usually a huge price break for orders of 500 or 1000 LEDs!

Continue reading “Modular Systems Using SPI” →

Fake Snow From An Arduino

December 21, 2009 by Jake W 13 Comments

The team at [Sosolimited] was contracted to create an interesting holiday window dispay for the HBO retail store in NYC. The Times Square display encorporates a board of LEDs and a machine for blowing the artificial snow particles around the enclosure.

The code for controlling the LED array was written on top of the open source C++ toolkit, openFrameworks and the entire setup is interfaced through an Arduino Duelmilanove. Multiple Sharp IR sensors were hooked up to the Arduino in order to detect the movement of observers, which in turn triggers fans to blow the ‘snow’ around. A National Control Devices relay board connects the heavy duty fans to the Arduino. This video demo shows just how attractive the project is in motion.

Advent Wreath From Parts You Have On Hand

December 20, 2009 by Mike Szczys 9 Comments

Here’s an advent wreath made from six parts and a paper clip. Powered by a CR2032 3v button cell, the circuit has been free-formed using a paper clip as the conductor. We love the “dead bug” style of construction used with the ATtiny13 microcontroller because it adds an extra level of intrigue for the uninitiated. This project build on the flickering circuit we saw last year and uses the LEDs as light sensors, only turning on when a certain darkness level has been reached.

We used a tiny13 with our Menorah project last year and still have some lying around that we can use for this. We’re sure you’ve got at least a couple of low-pin-count micros on hand. If you don’t, you should!

Peggy2 X2, With Video

December 19, 2009 by Caleb Kraft 10 Comments

[youtube=http://www.youtube.com/watch?v=-ImjfHxXGfc]

Being avid fanatics of flashing lights, we always love to see the peggy2 in action. The video above shows another improvement, which is two peggy2 units working together as one. [iservice2000] chained the two together and wrote new code for the display. Using an Arduino to drive it all, he has gotten them to act as one. While video on the peggy2 isn’t new, this is the first time we’ve seen two of them chained together. The end result is going to be a scrolling sign that can be updated via the web, or that can display tweets. We did notice a bit of tearing, is that from the camera or the software?

[via littlebirdceo]

Light Up Your Limbs

December 16, 2009 by Mike Szczys 12 Comments

Here’s a Christmas tree project we can get behind. The “tree” itself is made of twisted pairs of insulated copper wire. At the end of each pair a surface mount LED has been soldered between the two conductors. All of the wire limbs converge into a 4×4 matrix. One tree uses a prototyping shield and an Arduino, the other tree is just using an ATtiny2313 microprocessor. Take a look at the twinkling tree in the video after the break.

This artful creation uses one color of LEDs. We’d love to see future improvements that incorporate multiple colors, enhance the fading effects, and perhaps add some interactivity such as pulsing to an inspiring rendition of Chestnuts Roasting on and Open Fire (which, consequently, is called “The Christmas Song“).

Continue reading “Light Up Your Limbs” →