The release notes for the 2.1.1 Raspberry Pi Pico SDK have a late holiday present: The RP2040 chip is now certified to run at 200 MHz if you use at least 1.15V as the supply voltage.
Previously, the certified speed was 125 MHz, although it was well-known you could overclock the device. By default, the 125 MHz figure is still what you’ll get, though. If you want a higher frequency, you need to set SYS_CLK_MHZ to 200 before doing a build. Continue reading “Pico Gets A Speed Bump”
There are a whole bunch of different ways to create 3D scans of objects these days. Researchers at the [UW Graphics Lab] have demonstrated how to use a small, cheap time-of-flight sensor to generate scans effectively.
The key is in how time-of-flight sensors work. They shoot out a distinct pulse of light, and then determine how long that pulse takes to bounce back. This allows them to perform a simple ranging calculation to determine how far they are from a surface or object.
However, in truth, these sensors aren’t measuring distance to a single point. They’re measuring the intensity of the received return pulse over time, called the “transient histogram”, and then processing it. If you use the full mathematical information in the histogram, rather than just the range figures, it’s possible to recreate 3D geometry as seen by the sensor, through the use of some neat mathematics and a neural network. It’s all explained in great detail in the research paper.
The technique isn’t perfect; there are some inconsistencies with what it captures and the true geometry of the objects its looking at. Still, the technique is young, and more work could refine its outputs further.
If you don’t mind getting messy, there are other neat scanning techniques out there—like using a camera and some milk.
Continue reading “Reconstructing 3D Objects With A Tiny Distance Sensor”
If you’ve been waiting for news from our upcoming Hackaday Europe event in March, wait no longer. We’re excited to announce the first slice of our wonderful speakers lineup! Get your tickets now,
Hackaday Europe is going down again in Berlin this year on March 15th and 16th at MotionLab. It’s Hackaday, but in real life, and it’s too much fun. The badge is off-the-scale cool, powered by the incredible creativity of our community who entered the Supercon SAO contest last fall, and we’re absolutely stoked to be tossing the four winning entries into your schwag bag in Europe.
If you already know you’ll be attending and would like to give a seven-minute Lightning Talk on Sunday, we’re also opening up the call for talks there. Tell us now what you’d like to talk about so we can all hear it on Sunday morning.
We’re looking forward to the talks and to seeing you all there! We’re getting the last few speakers ironed out, have a keynote talk to announce, and, of course, will open up workshop signups. So stay tuned! Continue reading “Hackaday Europe 2025: Speakers, Lightning Talks, And More!”
Rev up your browsers, package managers, or whatever other tool you use to avail yourself of new software releases, because the KiCAD team have announced that barring any major bugs being found in the next few hours, tomorrow should see the release of version 9 of the open source EDA suite. Who knows, depending on where you are in the world that could have already happened when you read this.
Skimming through the long list of enhancements brought into this version there’s one thing that strikes us; how this is now a list of upgrades and tweaks to a stable piece of software rather than essential features bringing a rough and ready package towards usability. There was a time when using KiCAD was a frustrating experience of many quirks and interface annoyances, but successive versions have improved it beyond measure. We would pass comment that we wished all open source software was as polished, but the fact is that much of the commercial software in this arena is not as good as this.
So head on over and kick the tires on this new KiCAD release, assuming that it passes those final checks. We look forward to the community’s verdict on it.
In the near future, imagine a world where your health is continuously monitored, not through bulky devices but through an invisible graphene tattoo. Developed at the University of Massachusetts Amherst, these tattoos could soon detect a range of health metrics, including blood pressure, stress levels, and even biomarkers of diseases like diabetes. This technology, though still in its infancy, promises to revolutionize how we monitor health, making it possible to track our bodies’ responses to everything from exercise to environmental exposure in real-time.
Graphene, a single layer of carbon atoms, is key to the development of these tattoos. They are flexible, transparent, and conductive, making them ideal for bioelectronics. The tattoos are so thin and pliable that users won’t even feel them on their skin. In early tests, graphene electronic tattoos (GETs) have been used to measure bioimpedance, which correlates with blood pressure and other vital signs. The real breakthrough here, however, is the continuous, non-invasive monitoring that could enable early detection of conditions that usually go unnoticed until it’s too late.
While still requiring refinement, this technology is advancing rapidly. Graphene still amazes us, but it’s no longer just science fiction. Soon, these tattoos could be a part of everyday life, helping individuals track their health and enabling better preventative care. Since we’re hackers out here – but this is a far fetch – combining this knowledge on graphene production, and this article on tattooing with a 3D printer, could get you on track. Let us know, what would you use graphene biosensors for?
Continue reading “Graphene Tattoos: The Future Of Continuous Health Monitoring?”
Good news for everyone who cannot get enough from improbably shaped boats that get referred to as a bench: the current owner (NTI Group) of the copyright has announced that 3DBenchy has been released into the public domain. This comes not too long after Prusa’s Printables website had begun to purge all derived models to adhere to the ‘no derivatives’ license. According to NTI, the removal of these derived models was not requested by NTI, but by a third-party report, unbeknownst to NTI or the original creator of the model. Recognizing its importance to the community, 3DBenchy can now be downloaded & modified freely.
NTI worked together with the original creator [Daniel Norée] and former Creative Tools CEO [Paulo Kiefe] to transition 3DBenchy and the associated website to the public domain, with the latter two having control over the website and associated social media accounts. Hopefully this means that the purged models on Printables can be restored soon, even if some may prefer to print alternate (literal) benches.
The unfortunate part is that much of this mess began courtesy of the original 3DBenchy license being ignored. If that point had been addressed many years ago instead of being swept under the rug by all parties involved, there would have been no need for any of this kerfuffle.
There’s a constant tension between governments looking for easier ways to catch criminals, companies looking to actually protect their users’ privacy, and individuals who just want their data to be truly private. The UK government has issued an order that threatens to drastically change this landscape, at least when it comes to Apple’s iCloud backups. The order was issued in secret, and instructed Apple to provide a capability for the UK officials to access iCloud backups that use the Advanced Data Protection (ADP) system. ADP is Apple’s relatively new end-to-end encryption scheme that users can opt-into to make their backups more secure. The key feature here is that with ADP turned on, Apple themselves don’t have access to decrypted user data.
If this order wasn’t onerous enough, it seems to explicitly include all ADP-protected data, regardless of the country of origin. This should ring alarm bells. The UK government is attempting to force a US company to add an encryption backdoor to give them access to US customer data. Cryptographer [Matthew Green] has thoughts on this situation. One of the slightly conspiratorial theories he entertains is that portions of the US government are quietly encouraging this new order because the UK has weaker protections against unreasonable search and seizure of data. The implication here is that those elements in the US would use this newfound UK data access capability to sidestep Fourth Amendment protections of citizens’ data. This doesn’t seem like much of a stretch.
[Matthew] does have a couple of suggestions. The first is passing laws that would make it illegal for a US company to add backdoors to their systems, specifically at the request of foreign nations. We’ve seen first-hand how such backdoors can backfire once accessed by less-friendly forces. In an ironic turn of fate, US agencies have even started recommending that users use end-to-end encrypted services to be safe against such backdoors. Technically, if this capability is added, the only recourse will be to disable iCloud backups altogether. Thankfully Apple has pushed back rather forcefully against this order, threatening to simply turn off ADP for UK users, rather than backdoor the rest of the world. Either way, it’s a scary bit of overreach.
Continue reading “This Week In Security: The UK Wants Your ICloud, Libarchive Wasn’t Ready, And AWS”
