Raspberry Pi Model A Coming Soon

December 2, 2012 by Brian Benchoff 35 Comments

[Liz] over at the Raspberry Pi foundation took a trip over to the manufacturing facility in Wales and found some of the very first Model A Raspi samples. They’re just samples, but this means we should be seeing a few Model A Raspberry Pis pop up on Element 14 sometime very soon.

As the lower-cost model of the Raspberry Pi, the Model A lacks a few features of the more complete Model B. For starters, there is no Ethernet port or controller, and only one USB port, This greatly reduces the power requirements for the Model A, measured by the Raspi Foundation at about 1/3rd of the power draw of the Model B.

To save costs, the Model A is using the same PCB as the Model B – the Ethernet controller and port simply aren’t populated. It may seem like a downgrade, but if you’re planning on building a Raspi-powered autonomous drone, high-altitude balloon, or other robotics project, the reduced power draw will be a great feature.

Plan 9 On The Raspberry Pi

December 1, 2012 by Brian Benchoff 13 Comments

Yet another operating system has been ported to the Raspberry Pi. No, it’s not Haiku, sadly, but it is something just as weird and interesting. This time it’s Plan 9 from Bell Labs, an 80’s era OS from the same company that brought you C and Unix.

As a research operating system, Plan 9 has a bunch of really weird, but useful features. For one, everything about a computer running Plan 9 is distributed; the memory can be running on one machine, the processor on another, and the display can run on yet another machine. This modularity gives Plan 9 the honorable title of, ‘more Unix than Unix’.

Another great feature, although somewhat of a historical note, is that Plan 9’s graphics capabilities are written into the kernel, unlike Linux and X where the display manager is floating around in user space.

It’s an interesting system, and if you’ve got enough Raspis to build your own supercomputer you might want to install Plan 9 on a few of your nodes, just to see what the future computer of ages past looked like.

Raspberry Pi Quadcopter

December 1, 2012 by Brian Benchoff 30 Comments

[youtube=http://www.youtube.com/watch?v=TjXvzMdf8Nk&w=470]

It was bound to happen sooner or later, but that doesn’t diminish the awesomeness of [Matthew]’s Raspberry Pi-powered quadcopter.

[Matthew]’s quadcopter is similar to all the other flying drones we’ve seen before with one important difference – all the processing, from reading the gyroscopes to computing exactly how much power to give each motor – is handled by a Raspberry Pi. This task is usually the domain of a microcontroller, as these calculations need to happen in real-time. The Linux distro [Matt] is running on his Pi has a lot more overhead than a simple AVR or ARM microcontroller, so doing everything that needs to be done in real-time isn’t guaranteed. With a bit of clever programming, [Matthew] managed to make sure all the necessary tasks were taken care of in time. It’s still not a real-time operating system, but for this project at least, it’s good enough.

Since the Raspberry Pi in [Matthew]’s quadcopter is much more powerful than a microcontroller, there’s plenty of head room to SSH into the ‘copter while it’s flying. There may even be enough processing power to stream video to a web server; we honestly can’t wait to see what [Matthew] does with his flying Linux computer in the future.

You can check out [Matthew]’s code over on the git or watch a few flight test videos over on his youtube.

Injecting Power Into A WiFi Dongle For The Raspberry Pi

November 27, 2012 by Mike Szczys 20 Comments

So the Raspberry Pi sometimes doesn’t have the juice needed to run power-hungry USB dongles. The most common issue is with WiFi adapters. The solution has long been to use a powered USB hub, but [Mike Worth] didn’t want to take up that much extra space. The solution he worked out injects power directly into the dongle itself.

The red and white wires coming out of the side provide the 5V source. This is coming from the same USB mains power adapter that supplies the RPi board itself. To connect the wires to the dongle he made an adapter out of some strip board and the shielding from the dongle. The end of the strip board pokes out of the shielding far enough for him to solder on some wire, which is then soldered to the traces on the dongle’s PCB.

You can just plug this in and get down to business. But while he was at it [Mike] added an improvised antenna for better reception. It’s the same type of hack we saw him use for a Bluetooth dongle in this links post.

Android VOIP Phone And Raspberry Pi Mate For An Intriguing PBX Setup

November 26, 2012 by Mike Szczys 5 Comments

[Ward Mundy] has found something great by combining a GXP-2200 phone with Raspberry Pi to create a private branch exchange. So the idea behind a PBX setup is kind of like a company intranet. All of the phones in the system are assigned an extension number and have access to the internal system functions like voice mail, and sharing phone lines to the outside world. We’ve talked about using an RPi as a PBX before, but the high-tech phone he’s using this time around pulls everything together remarkably well.

The GXP-2200 is available for under $200. It runs Android and has a full color touch screen pictured above. It is marketed as a multimedia phone and indeed it brings Skype and Google Voice to the party. But it also offers six SIP lines. The hardware even seems to be planned for this type of use as the phone offers a second Ethernet port to which the RPi board can be connected. In this example [Ward] simply screws the RPi to the phone’s plastic stand and connects the two using a six-inch cable. From there the PBX can be configured with the phone’s browser. How’s that for slick?

Minecraft Coming To Raspberry Pi

November 26, 2012 by Eric Evenchick 18 Comments

The folks over at the Raspberry Pi Foundation often gets asked “does it run Minecraft?” Mojang, the team behind the block building game, has announced that they will be releasing Minecraft: Pi Edition. This port will be based off the Pocket Edition of the game, but with a revised set of features.

So what does this have to do with hacking? Mojang has announced that the Pi Edition will have “support for multiple programming languages.” There aren’t too many details about what this support will entail, but it looks to be aimed at teaching programming by using the world of Minecraft.

Hopefully, it will be possible to interface with the RPi’s expansion header to allow external devices to get data and create objects in the Minecraft world. There’s a lot of potential for hacking and learning programming skills.

The best part? It will be a completely free download. We’re looking forward to the launch.

Tiny MAME Cabinet Built From Raspberry Pi

November 26, 2012 by Brian Benchoff 17 Comments

It’s been a while since we’ve seen [Sprite_tm] pull a project from thin air, and we haven’t seen him do anything with a Raspberry Pi yet. All things must pass, and finally [Sprite] has unleashed his tiny, pocket-sized MAME machine to the world.

The build uses a Raspi for all the Linux-ey and MAME goodness, but [Sprite_tm] didn’t want to fiddle around with the HDMI or analog video output. Instead, he chose to use an SPI-controlled TFT display that is only 2.4 inches across. This isn’t a new hack for [Sprite] – he figured out how to connect this display over GPIO pins with a Carambola earlier this year.

To make his cabinet portable, [Sprite] opted for using old cell phone batteries with a cleverly designed charging circuit. When the power supply is connected to +5V, the batteries charge. When this power is removed, an ATtiny85 provides 5V of power to the Raspi and display.

No arcade cabinet is complete without a marquee of some sort, so [Sprite] used an extremely tiny 128×32 white OLED to display the logo of the game currently being played. Everything in the Raspi is set up to be completely seamless when switching between games, automatically configuring the controls and marquee for the currently selected game.

You can check out [Sprite]’s mini MAME booting straight into Bubble Bobble after the break along with some gameplay footage and finally switching it over to Nemesis. A very awesome build from an exceedingly awesome maker.

Continue reading “Tiny MAME Cabinet Built From Raspberry Pi” →