Portal-ish Automated Turret

April 9, 2009 by Caleb Kraft 21 Comments

turret

[RazorConcepts] has built this cool automated turret. It is a home made frame with an airsoft gun, a Roboduino development board, a rangefinder, camera, and some servos. They programmed it to keep up constant random banter from the game as well as respond appropriately do different inputs. For example, it complains when you pick it up or knock it over as well as announcing if it has acquired a target. The range finder is mounted on its own servo which constantly sweeps back and forth, so the turret itself mainly sits still. You can see that the tracking is not so great in the video. [RazorConcepts] notes in the instructable that this is because the main focus was just to make it for “show”. We’ve seen our fair share of turrets before. We think he did a good job, but if it is just for show, maybe spend some more time on a nice body and smoother motion.

Continue reading “Portal-ish Automated Turret” →

A-pod

April 7, 2009 by Caleb Kraft 39 Comments

[youtube=http://www.youtube.com/watch?v=0jyBiECoS3Q]

We know it was just two days ago that we were ranting about the hexapods known as Phoenix, and their creator [Zenta]. In the comments on that post, [Bluehash] pointed us to [Zenta’s] latest creation. This is A-pod. The sheer articulation and believable motion here made this robot worthy of a post all it’s own. A-pod has a 2 dof “tail” and a 3 dof head with a total of 25 servos to drive it. The addition of the head adds so much character, add some face tracking and it would really blow us away. Well, after it fetched us a beer. He notes that he’s still working on the leg mechanicals, so it doesn’t do much walking yet.

Your Face On A Bot

April 7, 2009 by Caleb Kraft 13 Comments

[youtube=http://www.youtube.com/watch?v=fLoRpRu_KPo]

We’ll file this one under “creepy yet amusing”. You can now order a MechRC robot with a 3d replica of your own head mounted to it. The site thatsmyface.com is offering this as a product. Simply take some pictures of your face upload them and mark some options. They’ll send you your robotic replica, ready to go. As they point out at botjunkie, they’ll put any face on there that you have some decent pictures of. That’s even creepier.

Bots 4 Tots Charity Launched

April 6, 2009 by Nick Caiello 10 Comments

Bots 4 Tots

If you feel the same way that we do about robotics, you probably wish that you had more experience with them when you were a kid. [Don] felt that way too, and he decided to do something about it. So [Don] and his partner started the Chicago based organization Bots 4 Tots, with the mission of introducing inner city kids to robotics. [Don] told us that his organization plans on starting the kids with snap together projects like OWI’s Jungle Robot. After a few snap together projects, they plan to introduce the kids to soldering and hope to eventually move on to a larger collaborative project that all the kids can work on. Of course, doing all of these things requires money. Thats where we, as the DIY community, come in. So feel free to hit up the Bots 4 Tots site and make a donation to support their worthwhile cause, we know we will.

Speech Controlled Garbage Can

April 5, 2009 by Jason Rollette 9 Comments

[youtube=http://www.youtube.com/watch?v=–BIlxKVCYk]

This speech controlled garbage can was sent in via the tip line by [Amnon]. The garbage can will come to you following a black line and stopping when it sees a cross in the line, then waits for another voice command. It can then return to where it belongs or go outside following the line. The system is based on a microchip PIC 18F4431 and uses three 18 volts cordless drill motors and their batteries as the power source. “In the near future the line sensors will be replaced with UV line sensors and the black line will be replaced with clear UV color.”

When you call the system “Pach Zevel ” (garbage can in Hebrew) the system go to standby and the LED’s light up. After the previous stage if you say “ELAY” (to me in Hebrew) it will drive on the black line till the first crossing.
This adds new meaning to taking the trash out.

Wiimote Controlled Hexapods

April 5, 2009 by Caleb Kraft 8 Comments

[youtube=http://www.youtube.com/watch?v=QsBj7koZ9lk]

The Phoenix is a very impressive hexapod robot platform. It has 18 servos which gives each leg 3 degrees of freedom and a BasicAtom Pro 28 for the brains. Interestingly, the design started as a personal project of a forum member on the Lynxmotion forums. It turned out so well, it has become an actual product. We’ve seen videos of these before and they always have some pretty fluid and organic seeming motion. They seem almost alive in this configuration. The only thing that might make them scarier would be to add Lou Vega’s decapitated head, well maybe that plus some really nice face tracking. In the video above, you can see where someone paired one up with a Wiimote for a pretty intuitive control scheme. Yeah, we realize the video is nearly a year old, how did we miss this one? You can see a video of it walking around after the break, and another controlled by a ps2 controller.

Continue reading “Wiimote Controlled Hexapods” →

Arduino + Wii Nunchuck + Servos

March 30, 2009 by Caleb Kraft 12 Comments

[youtube=http://www.youtube.com/watch?v=phcsDNOglLI]

[Yezzer] has posted a video of a cool little project he’s working on. He has interfaced the Arduino and the Wii Nunchuck to control some servos. He mounted a standard USB webcam on it for good measure. There isn’t a whole lot of information, but he does include a few links to code he modified for the project. The movement is quite natural looking and seems like it would be a cheap way to get some good animatronic controls started. This might actually be a great way to control a robot for the Crabfu challenge, if they ever have another one.

Update: As [dokument] points out in the comments below, it looks like we’ve seen a set up that could be almost identical in the past.

[via the Hack a Day Flickr pool]