Radio Built From The London Underground Map

September 13, 2012 by Mike Szczys 20 Comments

We love it when PCB artwork is actually artwork. Here’s one example of a radio whose layout mimics the map of London’s subway system.

The build is for an exhibit at the London Design Museum. They have an artist in residence program which allowed Yuri Suzuki time and resources to undertake the project. He speaks briefly about the concepts behind it in the video after the break.

The top layer of copper, and silk screen was positioned to mirror the subway lines and stops on a traditional transportation map. Major components represent various transfer hubs. In this way he hopes the functioning of the circuit can be followed by a layman in the same way one would plan a trip across town.

This may be a bit more abstract than you’re willing to go with your own projects. But there are certainly other options to spicing you track layout.

Continue reading “Radio Built From The London Underground Map” →

Data From Your Coffee Maker Turned Into Art

August 29, 2012 by Mike Szczys 10 Comments

This is what your coffee looks like as it is being brewed. The three different art pieces seen above were generated based on data from different parts of a high-end coffee maker. This isn’t a bargain basement single switch drip maker (we reserve those for NES retrofits) but a top-of-the-line espresso machine. And before you cry foul we’ll warn you that the project is a marketing device for the manufacturer. But we still think it’s interesting so read on or jump directly to the video after the break.

We’re unsure if the sensors are normally included in the machine or if they were added during the hack. An Arduino pulls in data about the brew process from two flow meters, a steam indicator LED, and three thermistors. The measured values are sent to a Processing application which turns them into the generative art seen above. What results is a widescreen display that aims to turn your bleary-eyed wait for morning coffee into something interesting.

Continue reading “Data From Your Coffee Maker Turned Into Art” →

Gilded Hello Kitty Ax Made Using Electrolysis

August 29, 2012 by Mike Szczys 36 Comments

Ummm…. cute? For the Hello Kitty fan who has everything?

Yeah, we’re really not sure what’s going on here. It’s an art piece on which [Denis] spent a lot of time. He polished it, etched it, painted it, applied gold leaf, and drilled a hole for a charm. It’s that hole which interested us the most. He had a heck of a time figuring out how to make a hole in the hardened steel. The solution that finally worked was to use electrolysis to bore through the metal (translated).

[Denis] first made a small depression where he wanted the hole. This took time, and pretty much ate through the engraver bit he was using. But it was just enough to hold a drop of saline. He connected the positive side of his power supply to the ax head, then dipped the negative lead into the drop of saline. Each time the drop turned black he wiped it away and replaced it with fresh solution. Just five hours of this and a pack or two of cotton swabs and he was through.

Bring Your LED Matrix Project Into The Living Room

June 22, 2012 by Mike Szczys 6 Comments

If you’re able to make a project look this good it shouldn’t be hard to convince that significant other to let you install it in a prominent place in the house. We think [Greg Friedland] pulled this off perfectly by building a 4’x8′ tablet controlled LED matrix.

First of all, everything looks better in a shiny case. It shouldn’t come as a surprise that this looks nice, thanks to the face plates which are mounted in a way that gives them a modern style (we’d expect to see this hanging in Ikea). They’re acrylic diffuser panels meant for used with lighting in a suspended ceiling. They do a nice job of scattering the light put off by the 544 LED modules that make up the display. The wiring was made easy by using LED strands where each pixel has its own control chip (WS2801). It sounds like the display will peak at around 160 Watts, which isn’t really that much considering the area. One nice touch that’s shown off in the video after the break is a full-feature iPad interface that even allows you to paint in light using your finger. But we’re also satisfied that [Greg] posted about the physical build too.

Continue reading “Bring Your LED Matrix Project Into The Living Room” →

You’ll Throw Your Back Out Playing This Analog TV Synth

May 15, 2012 by Mike Nathan 11 Comments

de-rastra

While CRT televisions fall to the wayside as more people adopt flat-panel TVs, the abundance of unused sets gives hacker/artist [Kyle Evans] an unlimited number of analog canvases on which to project his vision. He recently wrote in to share his latest creation which he dubs “de/Rastra”.

The “CRT Performance Interface” as he calls it, is an old analog television which he hacked to display signals created by moving the TV around. Fitted with an array of force sensors, accelerometers, and switches, the display is dynamically generated by the movements of whomever happens to be holding the set.

Signals are sent wirelessly from his sensor array to an Atmel 328 microcontroller with the help of a pair of XBee radios, where they are analyzed and used to generate a series of audio streams. The signals are fed into a 400W amplifier before being inserted into the CRT’s yoke, and subsequently displayed on the screen.

We’re sure [Kyle] is probably trying to express a complex metaphor about man’s futile attempts to impose his control over technology with his project, but we think it simply looks cool.

Check out [Kyle’s] work for yourself in the video below and give us your take in the comments.

Continue reading “You’ll Throw Your Back Out Playing This Analog TV Synth” →

Build A Rig To Make Orbs In Your Light Paintings

May 1, 2012 by Caleb Kraft 10 Comments

We’ve covered plenty of light painting projects here. People are always finding new ways to create interesting things in this fairly new medium. This project covers a method of creating orbs or spheres in your light paintings. The author points out that many people do this currently by putting the light source at the end of a string, swinging it in front of them like a propeller, and turning slowly in a circle. He wanted to automate the process a bit, so he combined his motorized telescope tripod, a power drill, a strip of RGB LEDs, and a few scraps of wood. He now has an automated system to make perfect orbs. Some of the examples he shows are quite stunning.

[Jackson Pollock] Is Now A Robot

January 27, 2012 by Brian Benchoff 20 Comments

Even though abstract expressionism died out several decades ago, robots are still chugging along dripping nihilistic pigment onto a cold, uncaring canvas. [Liat] and [Assaf] created a robot named The Originals Factory to create paintings in the style of abstract expressionism, a style of painting that is arguably best represented by [Jackson Pollock] and his ‘drip paintings.’

The build is surprisingly simple – there are four containers filled with C,M,Y, and K pigments. Pumps transport these paints to a print head mounted on an aluminum rail above a canvas. The software portion of the build is rather interesting. Instead of pixels, the image is rendered in ‘vixels’ – vertical lines of a specific length and color. Although we don’t see any examples of more precise work, [Liat] tells us The Originals Factory can be used to plot graphs on the canvas.

Check out a video of The Originals Factory squirting paint down a canvas after the break.

Continue reading “[Jackson Pollock] Is Now A Robot” →