Making A Real Instrument Out Of A Kaoss Pad And Ribbon Controllers

August 1, 2013 by Brian Benchoff 6 Comments

swinger

MIDI guitars have been around since the 80s, and nearly without exception they are designed as direct, one-to-one copies of their acoustic and electric brethren. [Michael] has been working on turning this convention on its head with the Misa Tri-Bass, a MIDI guitar designed to be the perfect guitar-shaped synthesizer interface.

The tri-bass doesn’t produce any sound itself; instead, it’s a polyphonic MIDI controller with three channels controlled by three ribbon controllers on the neck. The body contains a huge touch screen divided into four MIDI channels, essentially turning this guitar into an instrument designed for electronic music first, and not an acoustic instrument kludged into filling an electronic role.

Unlike a whole lot of other digital guitar-shaped MIDI controllers, the tri-bass is actually made out of wood. Yes, the neck is made out of maple (inlaid with the three ribbon controllers, of course), and the body comes directly from a tree, with the styling inspired by a forgotten retro-modern design. It’s an impressive piece of kit, and we can’t wait to see [Michael]’s handiwork in the hands of digital guitarists the world over.

You can check out a video of [Michael] rockin out below.

Continue reading “Making A Real Instrument Out Of A Kaoss Pad And Ribbon Controllers” →

FLAMEnco Guitar

July 31, 2013 by Brian Benchoff 11 Comments

flamenco

[John] says, “I noticed an unfortunate lack of many flamethrower guitars on the web so I filled the need. ” That’s just awesome by us.

This series of guitar-mounted flamethrowers started with a small build, able to shoot a six-foot flame for about 40 seconds. Yes, very theatrical, but not something you’d want to change out after every song. From there the builds progressed to systems with more barrels, more fuel tanks, and a huge system that shoots 18-foot long flames colored with standard pyrotechnic supplies.

It should go without saying that this stuff probably isn’t something you should try at home. That being said, you really have to admire the craftsmanship and tenacity to make a guitar mounted flamethrower. Just don’t bring it to an indoor gig.

Continue reading “FLAMEnco Guitar” →

From Maple And Spruce To An Archtop Guitar

July 5, 2013 by Brian Benchoff No comments

While the violin maker gets most of the acclaim and prestige for turning lumber into musical instruments, you can’t deny the sheer beauty and grandeur of a jazz-style archtop guitar. Much larger than a violin or viola, the scale of a guitar can still lend itself to the exacting artistry of a master luthier, while adding some interesting engineering challenges not found in smaller stringed instruments.

Last year, [Bert van der Meij] built an archtop guitar for his daughter by following the bible written by a modern master, [Robert Benedetto]. The build began by sourcing huge blocks of quartersawn maple and spruce, carefully carving the spruce for the top and the maple for the back. The neck is made of three laminated strips of maple, carefully contoured with only hand tools.

In [Bert]’s video, there’s some interesting examples of the tools used in the creation of this fine instrument. Instead of carving the inside and outside of the top independently, [Bert] only carved the top and used a drill press set to a certain depth to rough out the back. With only a minimum of planing, this ensures the top has a constant thickness with a minimum of work.

The end product is a fine enough instrument to find its way onto the stage of any jazz club, as shown in a demo video of a few different musicians rocking out. A magnificent piece of work, and a wonderful gift to [Bert]’s daughter.

Guitarduino Show And Tell

June 14, 2013 by Mike Szczys 13 Comments

guitarduino-show-and-tell

[Igor Stolarsky] plays in a band called 3’s & Sevens. We’d say he is the Guitarist but since he’s playing this hacked axe we probably should call him the band’s Guitarduinist. Scroll down and listen to the quick demo clip of what he can do with the hardware add-ons, then check out his video explanation of the hardware.

There are several added inputs attached to the guitar itself. The most obvious is the set of colored buttons which are a shield riding on the Arduino board itself. This attaches to his computer via a USB cable where it is controlling his MaxMSP patches. They’re out of the way and act as something of a sample looper which he can then play along with. But look at the guitar body under his strumming hand and you’ll also see a few grey patches. These, along with one long strip on the back of the neck, are pressure sensors which he actuates while playing. The result is a level of seamless integration we don’t remember seeing before. Now he just needs to move the prototype to a wireless system and he’ll be set.

If you don’t have the skills to shred like [Igor] perhaps an automatic chording device will give you a leg up.

Continue reading “Guitarduino Show And Tell” →

Horribly Complicated Electric Guitar Keyboard

April 12, 2013 by Mike Szczys 32 Comments

the-email-gutar

Gutarist, hacker, and mustache enthusiast [David Neevel] brought together way too many pieces of hardware in order to use his electric guitar as a computer keyboard.

So let’s dig into the house of cards he built for the project. It starts off with the guitar which has been fitted with an additional pickup to interface with a Roland GR-33 synthesizer pedal. That outputs a MIDI signal, which many hackers would have connected to the computer and parsed with a simple script. But not [David], he connected it to an Arduino via an optisolator. Well that’s not too ridiculous, right? Don’t you think he’ll just parse the MIDI signals and push them to the computer via the Arduino’s USB port? Wrong! He translates the MIDI signals into combinations for a big relay board which is emulating the key matrix of an old USB keyboard. But as you can see in the demo video after the jump it works quite well.

If you’re more of the drumming sort there’s an electric drum set version of this hack too.

Continue reading “Horribly Complicated Electric Guitar Keyboard” →

Guitar EQ Levels Trigger The Stage Lights

April 11, 2013 by Mike Szczys 11 Comments

guitar-eq-strobe-control

Even if your band hasn’t made it big yet it’s still a lot of fun to put on a great show. This hack will help you add lighting effects to performances without having to shell out for a lighting technician. [Phil] put together a hack that lets you trigger the lights by setting a volume threshold with a pedal switch.

After reading about the hack that adds an EQ display for a pedal board he got the idea to convert the concept as control hardware instead of just for feedback. Just like the visualization project he uses an MSGEQ7 chip which takes care of the audio analysis. He’s using this for electric guitar so he only monitors three or four of the outputs using an Arduino. He built the hardware into a foot pedal by mounting a momentary push button on the lid of the enclosure. Stepping on the button causes the Arduino to save the the current audio level. Whenever it reaches that threshold again it will switch on a mains relay to drive an outlet. In this case a strobe light turns on when he starts to rock out, which explains the bizarre image above. You can get a better feel for the theatrics by watching the clip after the break.

Continue reading “Guitar EQ Levels Trigger The Stage Lights” →

Guitar Hero Controller Built From Toy Guitar And Keyboard

February 2, 2013 by Mike Szczys 13 Comments

frets-on-fire-custom-controller

[Heinrich Laue] was kind of a latecomer to the fake guitar playing video game phenomenon. He played Frets on Fire — an open source clone of the game — on PC and eventually bought a copy of Guitar Hero World Tour. But playing on the keyboard was a drag. Instead of buying a controller he built his own hacked Guitar Hero controller from a scrapped keyboard and a toy guitar.

The plastic toy he started with was screwed together. This is a really nice since it’s almost impossible to open toys that have been welded together. There was plenty of room inside for all his components and even some space to run the wires.

He started the electronic portion of the build by tracing out the keyboard matrix to figure out which solder pads he could tap into. The strum bar uses a door hinge with buttons on either side of it. When you move it back and forth it hits the buttons, with the spring mechanism in each returning it back to center. The fret buttons are keys from the keyboard, but the switches uses were pulled from a few computer mice. But the real innovation comes into play when he added the Star Power tilt sensor and whammy bar. Follow the link above to find out how he did it.