laser

523 Articles

Laser Level Tripod Made From Recycled Parts

October 14, 2011 by 6 Comments

laser_level_tripod

[msuzuki777] is a self-proclaimed “Lazy Old Geek” with way too much free time on his hands. He recently picked up a laser cross and figured that he would use some of that time to make a laser tripod for various projects around the house.

He pulled out an old camera tripod, and modified an unused CD jewel case so that it could be screwed onto the traditional camera mount. He added three bolts to the platform, on which he mounted another CD case, letting him adjust both the laser platform as well as the tripod.

He put together a simple power supply for the laser, and then mounted it on a pair of CDs sandwiched on top of one another. The CD platform was then popped onto the guts of an old CD player, allowing him to spin his laser pointer in any direction without having to re-level it.

The laser cross tripod certainly looks a bit complicated, but [msuzuki777] says it works a treat, allowing him to easily hang pictures and the like. He also mentions that he wants to throw an Arduino at it to automate the leveling process, which is something we’d love to see.

Win A Laser Cutter By Playing With Light

October 7, 2011 by 19 Comments

Buildlounge and Full Spectrum Laser have decided to give away a laser cutter to whoever comes up with the best project involving light.

The contest is in part sponsored by  adafruit industries. The focus of the contest is light – just design something around light, submit it, and you’re in the drawing for your own laser cutter. A solar oven, photophone, solar fiber-optic lighting and hacking apart an old overhead projector are suggested on the contest page, but the winning project will probably be much cooler.

Entries are due by January 1st. First prize is Full Spectrum Laser’s 40 Watt laser cutter, second is an awesome green laser pointer from Wicked Lasers, and third prize is an EL wire starter kit from Adafruit. Entries are due by January 1st, so we expect to see a lot of awesome submissions on the Hack A Day tip line between now and New Years.

Laser Trip Wire In An Easy-to-use Form Factor

September 11, 2011 by 27 Comments

[Rul] built a nice laser trip wire alarm for use in Airsoft matches. Just place the enclosure so that the beam crosses a doorway and it will sound an alarm when the beam is broken. The only problem with this setup is that you need a reflective surface on the opposite side that can be positioned to direct the beam of light back to a photoresistor. But wait, there’s a second option. [Rul] also added a leaf switch that can be connected to an actual trip wire instead of using the laser.

A PIC 16F688 controls the laser module and monitors the photoresistor and leaf switch. When power is first switched on the box goes into a setup mode where it waits until the laser is detected by the photoresistor, switching on an LED to signal that you’ve got the beam aimed correctly. One press of the push-button puts it in activate mode which will sound the hacked window-alarm inside when the beam is broken. A toggle switch lets the operator chose between laser or wire operation.

You certainly won’t miss the alarm when it’s set off. Watch it scare the life out of a poor house cat in the clip after the break.

Continue reading “Laser Trip Wire In An Easy-to-use Form Factor” →

Incredible 1000 MW Iron Man Repulsor Beam

July 14, 2011 by 55 Comments

awesome_hand_mounted_repulsor_laser

German lab technician by day, hacker by night [Patrick Priebe] has done it again, this time strapping a ridiculously high-powered laser to the palm of his hand. Earlier this year, we showed you an awesome Neodymium:YAG pulse laser pistol he built, and it seems he never takes a rest from constructing crazy laser projects.

[Patrick] is a huge Iron Man fan, and his palm-mounted laser unit was built as an ode to his all-time favorite super hero. Crafted to invoke images of Iron Man’s repulsor beam, his laser uses a 1000 mw 445 nm laser diode to get the job done. if you happen to be keeping track, that makes his DIY laser just as powerful as the WickedLasers Spyder 3 Arctic – THE benchmark in portable handheld lasers.

Like his previous builds, we can’t seem to find a whole lot of information about the laser’s construction process. We do know however, that the unit was crafted from a 2mm thick sheet of brass, which fits nicely on his hand while simultaneously acting as a very large heat sink. This large surface area allows him to run the laser continuously for three minutes before requiring a cool down, which is no small feat.

We think it’s an awesome project, and as you can see by the videos of the three separate revisions it has undergone, [Patrick] is quite serious when it comes to perfecting his wares.

Continue reading “Incredible 1000 MW Iron Man Repulsor Beam” →

DIY Wiper Speed Control And Collision Avoidance

July 13, 2011 by 24 Comments

ir_sensor_rain_detection

On many new cars, automatic wiper speed control can be had as an upgrade, though most cars do not offer front-end collision prevention at all. [Rishi Hora] and [Diwakar Labh], students at the Guru Tegh Bahadur Institute of Technology in New Delhi, developed their own version of these features, (PDF warning, skip to page 20) which they entered into last year’s Texas Instruments Analog Design Contest. Under the guidance of professors [Gurmeet Singh] and [Pawan Kumar], the pair built the systems using easily obtainable parts, including of course, an MSP430 microcontroller from TI.

The collision prevention system uses a laser emitter and an optical detector to estimate the distance between your car and the vehicle in front of you, sounding an alarm if you are getting too close. In a somewhat similar fashion, the wiper speed control system uses an IR emitter and detector pair to estimate the amount of water built up on the windshield, triggering the wipers when necessary.

While not groundbreaking, the systems would be quite handy during monsoon season in India, and seem easy enough to install in an older vehicle. The only thing we’re not so sure about is pointing lasers at cars in traffic, but there are quite a few available alternatives that can be used to measure distance.

Continue reading to see a video walkthrough and demonstration of both systems.

Continue reading “DIY Wiper Speed Control And Collision Avoidance” →

How To Build Your Own Pulsed Laser Pistol

July 10, 2011 by 50 Comments

build_your_own_pulsed_laser_gun

Self-declared Mad Scientist and Instructables user [Trevor Nestor] recently built a pulse laser pistol and decided to share his build process, so that you too can build a ray gun at home. The gun is made up of mostly scavenged components, save for the Neodymium:YAG laser head, which he purchased on eBay for about $100. He does say however, that you can score an SSY-1 laser from an old rangefinder, providing you hang out near a stockpile of decommissioned Abrams tanks.

[Trevor] walks you through the process of recycling old disposable cameras to get enough components for a capacitor bank, as well as how the charging circuit should be constructed. He also discusses how the laser head needs to be wired, before showing off the finished laser pistol in a cheeky video, embedded below.

While the gun lacks the finish of this laser pistol we showed you, it’s no less potent when shooting through plastics, wood, and thin metals. It’s a great starting point if you are looking to build a laser of your own, leaving room for improvements, such as a faster charging circuit.

Continue reading “How To Build Your Own Pulsed Laser Pistol” →

Making Airsoft Guns Far More Potent

June 21, 2011 by 27 Comments

airsoft_laser_rifle

[Drake] wrote in to share his recent project, which involves repurposing an Airsoft rifle that was sitting around, collecting dust. Airsoft guns as a whole are not all that impressive, but convert your Airsoft gun into a laser rifle, and we’re all ears.

His laser blaster is honestly pretty straightforward as far as laser projects go, but we just couldn’t resist. He pulled apart the Airsoft gun, removing all of the “airy” bits, leaving just the trigger behind. He added a 9v battery and a linear power supply to the gun, wiring them up to a 700mW laser diode from what we hope was a broken Blu-ray burner.

In the obligatory “look at what I can destroy with my laser gun” video embedded below, [Drake] shows off his gun’s potency at various ranges, popping balloons from 35 feet away. He even shows off the laser’s usefulness as a light pen for glow in the dark surfaces.

While his modifications are nothing we haven’t seen before, his gun is far more accessible than others we have featured.

Have any cool high-powered laser projects of your own? Share them with us in the comments.

Continue reading “Making Airsoft Guns Far More Potent” →