MagicShifter 3000: An Over-Engineered POV Stick With A 15-Year Journey

August 22, 2016 by Moritz Walter 64 Comments

3 hackers, 16 LEDs, 15 years of development, one goal: A persistence of vision display stick that fits into your pocket. That’s the magicShifter 3000. When waved, the little, 10 cm (4 inches) long handheld device draws stable images in midair using the persistence of vision effect. Now, the project has reached another milestone: production.

The design has evolved since it started with a green LED bargraph around 2002. The current version features 16 APA102 (aka DotStar) RGB LEDs, an ESP-12E WiFi module, an NXP accelerometer/magnetometer, the mandatory Silabs USB interface, as well as a LiPo battery and charger with an impressive portion of power management. An Arduino-friendly firmware implements image stabilization as well as a React-based web interface for uploading and drawing images.

After experimenting with Seeedstudio for their previous prototypes, the team manufactured 500 units in Bulgaria. Their project took them on a roundtrip through hardware manufacturing. From ironing out minuscule flaws for a rock-solid design, over building test rigs and writing test procedures, to yield management. All magicShifter enclosures are — traditionally — 3D printed, so [Overflo] and [Martin] are working in shifts to start the 500 prints, which take about 50 minutes each to complete. The printers are still buzzing, but assembled units can be obtained in their shop.

Over all the years, the magicShifter has earned fame and funding as the over-engineered open hardware pocket POV stick. If you’re living in Europe, chances are that you either already saw one of the numerous prototype units or ran into [Phillip Tiefenbacher] aka [wizard23] on a random hacker event to be given a brief demo of the magicShifter. The project always documented the status quo of hardware hacking: Every year, it got a bit smaller, better, and reflected what parts happened to be en vogue.

The firmware and 3D-printable enclosure are still open source and the schematics for the latest design can be found on GitHub. Although, you will search in vain for layout or Gerber files. The risk of manufacturing large batches and then being put out of business by cheap clones put its mark on the project, letting the magicShifter reflect the current, globalized status of hardware hacking once more. Nevertheless, we’re glad the bedrock of POV projects still persists. Check out the catchy explanatory video below.

Continue reading “MagicShifter 3000: An Over-Engineered POV Stick With A 15-Year Journey” →

VoLumen — The Most Advanced Persistence Of Vision Display Yet

April 21, 2014 by James Hobson 47 Comments

Whoa. We’re just blown away by this new project by [Maximilian Mali] and [Sebastian Haushofer]. It’s a stacked Persistance of Vision display, with 9 layers — effectively creating a Volumetric 3D POV Display.

We recently shared one of [Maximilian’s] other projects, The Ripper CNC Machine. As it turns out, the reason he built The Ripper was to aid in the manufacture of his VoLumen project. He’s been designing these Volumetric 3D displays for about 3 years now, with the first iteration called the viSio, capable of 40 fps 3D video without the need for any 3D glasses.

The new and improved VoLumen features 34 micro-controllers, each with 512MB flash memory for storing animation data. In total there are 1024 high power RGB LEDs, which draw a whopping 200W at full load, making it bright, crisp and visible even in direct sunlight. It’s an incredible project that [Maximilian] started when he was only 16 years old.

You have to see the video of this thing in action.

Continue reading “VoLumen — The Most Advanced Persistence Of Vision Display Yet” →

POV Display With An Element Of Danger

December 30, 2013 by James Hobson 8 Comments

FZKU6SCHPFZR2KV.LARGE

Persistence of vision displays are always cool, although we must admit this one looks like it could very well explode at high speeds…

Safety concerns aside, this desk fan based display provides a great starting point for learning about making POV displays. It makes use of an old cellphone battery, an ATmega8, some LEDs, Veroboard, assorted wires and solder and of course, a high-speed desk fan.

[shparvez001] also provides the full code on his blog for the project, making it very easy to replicate. Though we might also suggest you keep it small enough that the original fan cage still fits on top.

From an aesthetic point of view, the display looks fine in the dark — but when the lights are on you might get some odd looks. We can see this project being greatly improved by mounting the LEDs through one of the fan blades, and the control electronics on the back side of the other blades. Maybe throw in some wireless charging for the battery while the fan is off too?

Anyway, stick around after the break to see the display in action. If you want a more permanent fan POV try adding display hardware to a ceiling unit.

Continue reading “POV Display With An Element Of Danger” →