CAPTCHA Bot Beats New Are You A Human PlayThru Game

What do you put on your pancakes? Butter and syrup but not a pair of shoes? This makes sense to us, and it’s the premise of the new CAPTCHA game PlayThru. The space that is normally filled by nearly illegible text is now taken up by a little graphic-based game where you drag the appropriate items to one part of the screen. In addition to being easier than deciphering letters, this new platform shouldn’t require localization. But alas, it seems the system is already broken. [Stephen] sent us a link to a bot that can pass the PlayThru CAPTCHA.

Take a look at the video after the break to see the four test-runs. It looks like the bot is just identifying the movable objects and trying them out. Sometimes this is quick, sometimes not. But it does eventually succeed. For the PlayThru developers this should be pretty easy to fix, just make an error limit for trying the wrong item. At any rate, we can’t think defeating the current system is nearly as hard as defeating reCaptcha was.

Update: [Tyler] over at Are You A Human wrote in to share their side of this story. Apparently we’re seeing the bot play the game, but not necessarily pass it. It isn’t until the game if finished and the playing information is sent to their servers that a decision is made on whether it is successful or not. This way they can change the authentication parameters from the server side at any time.

At the same time, [Stephen] updated his bot and made a video of it playing the game without any shoes on the pancakes.

Continue reading “CAPTCHA Bot Beats New Are You A Human PlayThru Game”

Soldering From The Hip

You can be the Sheriff around these parts, but only if you have a solder gun and holster to boot. [Mikasaurus’] latest build is certainly fun, even if it’s not so practical. We’re not giving up our Weller knock-off any time soon, but this quick-heat repackage will certainly be a conversation starter at your next Hackerspace event.

The business end of the build is taken from a cheap four-battery soldering iron. [Mike] separated each of the components, then grabbed a toy gun to see where each of them might fit. The batteries are just the right size to fit into the gun’s magazine. All he had to do to make that happen is add contacts to the gun and springs to the magazine. A momentary push switch was positioned behind the trigger and used to connect the battery pack to the solder tip.

After the break you’ll find a little over-the-top modeling, and some solder melting. This will go great with that 9mm Bluetooth headset you built. Just don’t stick the wrong one in your ear.

Continue reading “Soldering From The Hip”

Retrotechtacular: 7-function Remote Control Color Television

Ah, the days when a television was a solid piece of furniture. When it comes to moving, we can’t say we miss it. But looking at this wooden TV cabinet with storage for its 7-function remote we can’t help but think that today’s TVs seem more… trivial… when it comes to the layout of the living room.

The promotional video that goes with this model is a gem of a different era. As you probably have heard, this week [Eugene Polley] passed away. He is credited with inventing the first wireless television remote control. It was not nearly as advance as what’s shown in the video after the break. Instead, it used visible light in conjunction with four light sensors at each corner of the CRT screen. You could turn the set on and off, and flip through channels, but sometimes with the right lighting conditions the set would change all by itself. We wonder if you’d ever come home to find the TV has mysteriously flipped itself on?

Continue reading “Retrotechtacular: 7-function Remote Control Color Television”

Making A Digital Delay From A Simple Microcontroller

If you’d like to start experimenting in DSP, or just want to build a guitar pedal, here’s the project for you. It’s an audio echo using just a microcontroller from the fruitful workshop of [Vinod].

For his circuit, [Vinod] fed the output of a small electret microphone into a small amplifier, and then into the ADC of an ATMega32. Inside the microcontroller, [Vinod] set up a circular array which writes the voltage from the microphone and sends it out to a speaker. Because the array is circular (i.e. it loops around when it gets to the end), [Vinod] has a digital version of a loop of magnetic tape, perfect for recording sounds and playing back echos.

Because [Vinod] is using an ATMega32, he only has a limited amount of RAM to record audio samples. The delay time could be lengthened with a more capable microcontroller, or even the addition of a large RAM chip. With his setup, [Vinod] can do some really interesting experiments with audio and DSP, so we wouldn’t be surprised if an enterprising musician used this project as the basis for a digital delay stomp box.

You can check out [Vinod]’s demo of his echo machine after the break.

Continue reading “Making A Digital Delay From A Simple Microcontroller”

Making Instagram With An Old CRT

If you’re not familiar with Instagram, it’s a mobile app that takes pictures, applies low-fi ‘lomographic’ digital filters, and shares them on the Internet. For reasons we can’t comprehend, Instagram has been wildly successful as of late and was recently purchased by Facebook for a Billion dollars. [Martin Ström] figured he could do something much cooler than applying digital filters to a cell phone picture, so he built InstaCRT, an app that turns your pictures into grainy CRT images and satiates the geek and hipster in everyone.

From [Martin]’s project page, InstaCRT uses a small black and white CRT from an old camcorder and a Canon 7D to apply real-world analog filters to all the uploaded pictures. Once the pictures are uploaded to the MacBook Pro server, they’re displayed on the CRT and a picture is taken with the 7D. Once an Android/iOS device sends a picture to the server, it’s displayed on the CRT, the 7D snaps a picture, and the resulting ‘filtered’ picture is sent back to the mobile device.

While we’re sure a few Hackaday commentors are going to ask ‘why’, it’s still a very cool build that is the first real world digital camera filter we’ve seen. You can check out the video demo of InstaCRT after the break.

Continue reading “Making Instagram With An Old CRT”

Interview: [Vladimir Demin] The Creator Of The Player Guitar

We have been amazed by [Vladimir Demin]’s work twice now. Originally, with his automatic Bayan, and more recently with his amazing automatic guitar. What you didn’t get to see was how pleasant ant fun [Valdimir] was in his email correspondence with us. You will get a chance though, because [Vladimir] agreed to answer some questions for us in an impromptu email interview. Join us after the break to get to know this fascinating gentleman a little bit better.

Continue reading “Interview: [Vladimir Demin] The Creator Of The Player Guitar”

Lego For Girls? [Limor] Has Some Ideas.

When Lego announced that they were going to do a series of “Lego for girls”, many of us didn’t get it. When we were kids(get off my lawn!), legos were completely asexual. At least, that’s how my mind saw them, being a caucasian male. While the idea itself makes sense in marketing terms, the products they rolled out were stuck firmly in the same old gender roles. Pink abounds and flowers are prevalent. There’s nothing wrong with little girls being into those things, but it is sad when that is the only option ever presented. To attempt a parallel, I’m not into sports, and I can tell you that the availability of scientific role models kept me sane through many tough periods of life.

[Limor], who you may recognize as the brains behind Adafruit has proposed the set you see above which puts another option out there. They’ve entered the set into the Lego Cuusoo site, where it could become a real product if it earns enough votes. Here is another nice idea for female lego sets being proposed, that shows females in realistic roles such as a chemist and archaeologist .  I’m kind of surprised that I don’t see [Amelia Earhart] or [Ada Lovelace] herself anywhere in the list.

Gender roles aside, who is going to build the ultimate [Nikola Tesla] kit for us?