The Long Road Towards Reverse Engineering The ESP32 Wi-Fi Driver

May 27, 2024 by Maya Posch 15 Comments

Although much of the software that runs on the ESP32 microcontroller is open source, the Wi-Fi driver is not. Instead, it uses a proprietary binary blob. This was no problem for [Jasper Devreker]’s reverse-engineering of the ESP32’s Wi-Fi stack so far until he came face to face with reverse-engineering the initialization of the Wi-Fi peripheral. As it turns out, there is a lot of work involved after you call esp_phy_enable in the Espressif binary blob, with the team logging 53,286 peripheral accesses during the initialization phase. In comparison, sending a Wi-Fi packet takes about ten calls.

Currently, the way that the initialization step is handled is by having the initialization routine in the binary blob do its thing by configuring the radio and other elements before killing the FreeRTOS task and replacing it with their own version. The team is actively looking for a clean approach for moving forward that will avoid simply writing everything from scratch. For the Wi-Fi MAC, existing code (e.g., FreeBSD’s stack) could be used, but the radio code is much more of a headache. Clearly, there’s still a lot more work to be done in order to get a fully open-source Wi-Fi MAC and stack for the ESP32, but having the community (that’s you) pitch in might speed things up if there’s demand for an open-source driver.

[Jasper’s] been working on this for a while. He’s even built a Faraday cage to make the task easier.

Hunting For Part Numbers: Analyzing The Buck Converter On Mini 560 Modules

May 26, 2024 by Maya Posch 17 Comments

Some of us may have recently stumbled over these mysterious ‘Mini 560’ synchronous buck converter modules at various e-shopping websites. These little modules claim to take in 7-20 VDC and output whatever voltage they’re configured for (e.g., 5 VDC). What IC is used on these modules? Since the IC on these modules has had its markings laser-etched away, answering that particular question is a tedious sleuthing job. Fortunately, [MisterHW] has done the legwork for us already, with a detailed write-up.

Details like the nominal input rating, measured currents, and resulting efficiency values provide clues. Looking at the 0603 SMD resistor values for given output voltages provides the programming resistances, combined with the footprint of the QFN-20 package. After desoldering the IC on a sample board, the footprint was reminiscent of certain Texas Instruments (Ti) packages, leading to a perusal of the Ti parametric database and a couple of candidate matches.

Continue reading “Hunting For Part Numbers: Analyzing The Buck Converter On Mini 560 Modules” →

ICQ Will Shut Down On June 26 This Year

May 26, 2024 by Maya Posch 29 Comments

In many ways, ICQ has always been a bit of a curiosity. It was one of the first major instant messenger clients of the 1990s. It saw broad uptake alongside the likes of AOL Instant Messenger and MSN Messenger. Yet, it outlasted both of them despite not being attached to an industrial juggernaut like AOL or Microsoft. After 27 years, however, it seems that the last petal will drop, with the shutdown of ICQ announced on the ICQ website for June 26, 2024.

Originally launched by an Israeli company, Mirabilis, in June of 1996, it took the Internet by storm, leading to AOL buying Mirabilis in June of 1998. Under the wing of AOL, ICQ kept growing its user base until it was sold to Digital Sky Technologies (now VK, which operates Mail.ru) in 2010. Around this time, the likes of Facebook and Google, with their own messaging solutions, came onto the scene, leaving ICQ to flounder. Ultimately, ICQ found a new home in the Russian market as a mobile messaging system until its imminent shutdown. Users are urged to move to the VK Messenger instead.

The demise of ICQ obviously led to a blast of nostalgia on sites like Hacker News, even though it has lost relevance in the West for many years. We’re sad to see this chapter end and will mourn the demise of our UINs (RIP, 61007952) along with our fellow compatriots in the usual IRC channels.

This is what happens when you depend on the grid. Going off the grid doesn’t have to look homemade, either.

Germany’s Solar Expansion And The Negative Effects Of Electricity Overproduction

May 25, 2024 by Maya Posch 184 Comments

Amidst the push for more low-carbon energy, we see the demolishing of one of the pillars of electric grids: that of a careful balancing between supply and demand. This is not just a short-term affair. It also affects the construction of new power plants, investments in transmission capacity, and so on. The problem with having too much capacity is that it effectively destroys the electricity market, as suppliers need to make a profit to sustain and build generators and invest in transmission capacity. This is now the problem that Germany finds itself struggling with due to an overcapacity of variable renewable power sources (VRE) like solar and wind.

With a glut of overcapacity during windy and sunny days, this leads to prices going to zero or even negative. While this may sound positive (pun intended), it means that producers are not being paid. Worse, it means that when, for example, France buys German wind power for negative Euros via the European Electricity Exchange (EEX), it means that Germany actually pays France, instead of vice versa. The highly variable output of wind and solar also means a big increase in curtailment and redispatch measures to keep the grid stable, all of which costs money and drives up operating costs.

Continue reading “Germany’s Solar Expansion And The Negative Effects Of Electricity Overproduction” →

A Look At 3D Printed Shoes: Hybrid, Fully Printed And Plain Weird

May 25, 2024 by Maya Posch 7 Comments

In the eternal quest to find more things to do with 3D printers, shoes have been in the spotlight for a while now. But how practical is additive manufacturing in this field really?

Adidas Ultra 4D running shoes with 3D printed midsole.

This is where [Joel Telling] of the 3D Printing Nerd YouTube channel puts in his two cents, with a look at a range of commercial and hobbyist ideas and products. Naturally, the first thing that likely comes to mind at the words ‘3D printed shoes’ is something akin to the plastic version of wooden clogs, or a more plastic-y version of the closed-cell resin of Crocs.

First on the list are the white & spiky Kaiju Gojira shoes from Fused Footwear, printed from TPE filament to order. TPE is softer to the touch and more flexible than TPU, but less durable. In contrast the Adidas Ultra 4D running shoes (from their 4D range) are a hybrid solution, with a standard rubber outsole, 3D printed midsole with complex structures and mostly fabric top part. Effectively a Nike Air in initial impression, perhaps.

Meanwhile ‘3D printed’ shoes ordered off Chinese store Shein turned out to be not 3D printed at all, while [Joel] seems to be really into fully 3D printed shoes from Zellerfeld, who appear to be using TPU. While it’s hard to argue about taste, the Adidas shoes might appeal to most people. Especially since they’d likely let your feet breathe much better, a fact appreciated not only by yourself, but also family members, roommates and significant others. So which of these (partially) 3D printed shoes would you pick, or do you have some other favorite?

Continue reading “A Look At 3D Printed Shoes: Hybrid, Fully Printed And Plain Weird” →

Mapping The Human Brain And Where This May Lead Us

May 23, 2024 by Maya Posch 31 Comments

In order to understand something, it helps to observe it up close and study its inner workings. This is no less true for the brain, whether it is the brain of a mouse, that of a whale, or the squishy brain inside our own skulls. It defines after all us as a person; containing our personality and all our desires and dreams. There are also many injuries, disorders and illnesses that affect the brain, many of which we understand as poorly as the basics of how memories are stored and thoughts are formed. Much of this is due to how complicated the brain is to study in a controlled fashion.

Recently a breakthrough was made in the form of a detailed map of the cells and synapses in a segment of a human brain sample. This collaboration between Harvard and Google resulted in the most detailed look at human brain tissue so far, contained in a mere 1.4 petabytes of data. Far from a full brain map, this particular effort involved only a cubic millimeter of the human temporal cortex, containing 57,000 cells, 230 millimeters of blood vessels and 150 million synapses.

Ultimately the goal is to create a full map of a human brain like this, with each synapse and other structures detailed. If we can pull it off, the implications could be mind-bending.

Continue reading “Mapping The Human Brain And Where This May Lead Us” →

Nuclear Fusion R&D In 2024: Getting Down To The Gritty Details

May 22, 2024 by Maya Posch 42 Comments

To those who have kept tabs on nuclear fusion research the past decades beyond the articles and soundbites in news outlets, it’s probably clear just how much progress has been made, and how many challenges still remain. Yet since not that many people are into plasma physics, every measure of progress, such as most recently by the South Korean KSTAR (Korea Superconducting Tokamak Advanced Research) tokamak, is met generally by dismissive statements about nuclear fusion always being a certain number of decades away. Looking beyond this in coverage such as the article by Science Alert about this achievement by KSTAR we can however see quite a few of these remaining challenges being touched upon.

Recently KSTAR managed to generate 100 million degrees C plasma and maintain this for 48 seconds, a significant boost over its previous record from 2021 of 30 seconds, partially due to the new divertors that were installed. These divertors are essential for removing impurities from the plasma, yet much like the inner wall of the reactor vessel, these plasma-facing materials (PFM) bear the brunt of the super-hot plasma and any plasma instabilities, as well as the constant neutron flux from the fusion products. KSTAR now features tungsten divertors, which has become a popular material choice for this component.

Researching the optimal PFMs, as well as plasma containment modes and methods to suppress plasma instabilities are just some of the challenges that form the road still ahead before commercial fusion can commence.

Continue reading “Nuclear Fusion R&D In 2024: Getting Down To The Gritty Details” →