Upgrading A Router With Impeccable Soldering Skills

April 3, 2013 by 25 Comments

router

[Necromant] recently acquired a router that was nearly free. Looking his gift horse in the mouth, he hooked up a serial port to see if it could run some updated firmware such as OpenWRT. The initial findings were promising; it used the same CPU as the very popular WR703N, but this free router only had 2 MiB of Flash and 8 MiB of RAM – barely enough to do anything. His solution to this problem is in the true hacker tradition: just solder some more chips onto the router.

Upgrading the RAM was comparatively easy; [Necromant] found an old stick of RAM, desoldered one of the chips, and replaced the measly 8 MiB chip with a new 64 Megabyte chip.

The Flash, though, proved more difficult. Without the right code in the Flash for the radio test, the router wouldn’t be useful at all. The solution was to read the original 2 MiB chip, read the Flash from a  WR703, and combined the two with a simple dd command. This was written to a new SPI flash chip with a buspirate and a home etched board.

CEE Is A Swiss Army Knife For Analog Electronics

July 4, 2011 by 28 Comments

The team at nonolith labs announced their CEE, a device for billed as, “an analog buspirate” that is meant to control, experiment, and explore the world of analog electronics. Nonolith labs started a kickstarter campaign for the CEE.

The CEE is capable of sub-millivolt and milliamp sampling at 44.1k samples/second, and sourcing 2 channels of 5V @ 2A with a little bit of soldering. This allows for precise control of motors and sensors with the web-based UI. We’re thinking this would be a great way to teach high schoolers the art of electronics, and would be great combined with a few lectures from Paul Horowitz.

The CEE ties into nonolith labs Pixelpulse, a pretty handy tool for visualizing analog and digital signals. You can check out a demo of Pixelpulse simulating a charging capacitor here.

We’re hoping this focus on education on analog electronics catches on – you can learn a lot more by building a 555-based mini Segway than you can slapping a microcontroller in every project. This would go under the same theory as, “any idiot can count to one.”

Check out the video of the CEE on the kickstarter campaign page.

Storage For Your Hacking Needs

March 14, 2010 by 18 Comments

Sometimes your project needs a lot of non-volatile ROM, right on cue [Matthew] let us know how to not only connect, interface, read, and write to SD cards with a PIC over serial, but also how to do the above mentioned with an old PATA HDD. For those without a PIC/serial connection don’t fret, [nada] let us know about his Bus Pirate SD card hack, of which our personal favorite part is the creative use of an old 5.25″ floppy connector as the SD card socket.

Thank You Ian Lesnet

August 7, 2009 by 16 Comments

A little over a year ago [Ian Lesnet] joined our hacking team and began cranking out some of the best original how-tos Hack a Day has ever offered. You may remember our popular web server on a business card from last fall and we’re sure everyone is familiar with the Bus Pirate (yes, they’re still on schedule).

It’s a year later and he’s found himself with less time to contribute. [Ian] is stepping down from blogging at Hack a Day, but you’ll find him right where he started: in the comments. You can also reach him directly on whereisian.com. [Ian] will be continuing to develop the Bus Pirate. You’ll find the latest info on the Bus Pirate’s Google Code page. He’s also posted a guide to the on-board pull-up resistors as well as a self-test guide that uses the new v2.0 firmware to confirm your Bus Pirate is working.

[Ian]’s contributions will be greatly missed. We’re always excited when we add contributors of his caliber to our crew.

Bus Pirate Preorder 2 Update

July 23, 2009 by 60 Comments

bp-unbox-0

A few weeks ago we held a preorder for the Bus Pirate universal serial interface tool. We split the preorder into two parts due to a shortage of PIC 24FJ64GA002-I/SO chips. The first preorder is arriving worldwide now, the second preorder has a longer lead time. Here’s everything we currently know about preorder 2, it’s subject to change, but we wanted to keep you up to date.

Preorder 2 contains orders for 563 Bus Pirates. Seeed Studio noticed an error in our quality control testing routine that misclassified about 50 preorder 1 Bus Pirates as defective. We updated the test and passing units will ship immediately to preorder 2 participants on a first come, first serve basis. Another 500 PICs are scheduled to arrive after August 1, which should take care of most remaining orders.

Continue reading “Bus Pirate Preorder 2 Update” →

Parts: Unboxing The Bus Pirate

July 20, 2009 by 43 Comments

bp-unbox-3

For months we’ve used our Bus Pirate universal serial interface tool to demonstrate electronics parts, so it’s only appropriate that the Bus Pirate get it’s own parts post. We recently had a Bus Pirate preorder, and today we received the pre-production Bus Pirate prototype from Seeed Studio. This prototype was mailed just a few days before preorder 1 started to ship, so those packages should start arriving any day.

Follow along as we unbox the prototype Bus Pirate, and connect it to a debugger to determine the PIC24FJ64GA002-I/SO revision that shipped with this board. Use this post to share your own Bus Pirate unboxing experience. Pictures and discussion after the break.

Continue reading “Parts: Unboxing The Bus Pirate” →

Bus Pirate Preorder 1 Ships

July 16, 2009 by 40 Comments

panelized-470.iijpg

A few weeks ago we held a pre-order for the Bus Pirate V2go, the first official Hack a Day hardware. We had initially hoped for a group purchase of 20 or 40 Bus Pirates, maybe 200 if it was extremely popular. In total, nearly a thousand Bus Pirates will be made.

The first 350 Bus Pirates (pre-order 1) have already been manufactured and tested. Seeed Studio has done a great job handling the orders, pre-order 1 should start shipping more than a week early. How long will it take to get to your mail box? It will vary for everyone, but our packages usually arrive from Seeed in 7 days.

Seeed sent us pictures of the Bus Pirate depaneling, programming, and quality control process. Check them out after the break.

Continue reading “Bus Pirate Preorder 1 Ships” →