The Arduino Due Is Finally Here

October 20, 2012 by Brian Benchoff 81 Comments

After a years-long wait, an ARM powered Arduino is finally due. The Arduino Due will finally be released this coming Monday.

On board the Arduino Due is an Atmel-sourced ARM Cortex M3 microcontroller running at 84 MHz. The Due has an impressive list of features including a USB 2.0 host, compatibility with the Android ADK (lest you still need an IOIO), 12 analog inputs with 12-bit resolution, 2 analog outputs running at 12 bits, a CAN interface, and more input pins than you can shake a stick at.

For a full list of features, you can grab this PDF we picked up when we saw the Due at Maker Faire NYC

This hardware update to the Arduino platform makes a lot of very cool builds very possible for even the beginner hardware hacker. Of course the Due will be used for controlling drones and UAVs, laser cutters and 3D printers, and playing WAV files from the analog outputs. The much improved hardware opens up a lot of other possible builds including making your own guitar pedals – DSP is a wonderful thing – and reading the telemetry from your car in real-time via the CAN bus.

Although it’s not available right now, you will be able to buy an Arduino Due for $49 USD this coming Monday at your favorite electronics retailers.

Physical Orangered Notifies You Of Reddit Messages

October 20, 2012 by Brian Benchoff 11 Comments

Anyone who has been around Reddit enough to anger the hive mind is familiar with the orangered, the envelope icon right next to your username that lights up in a beautiful orangered hue whenever you receive a new message. [Brad] wanted an orangered that was a little more visible, so he created a standalone Reddit message indicator to sit on his desk and light up whenever a new message has been delivered.

The case for [Brad]’s new orangered notifier was taken from a cheap thrift store clock. After dispensing of the mechanical movement, [Brad] loaded up the beautiful wooden case with an Arduino, a trio of LEDs, a speaker, and, of course, a small envelope logo reminiscent of Reddit’s message icon.

The Arduino is connected to a laptop running this Perl script. The script scrapes the JSON returned from the Reddit API and sends a command over the serial port to the Arduino if new messages have been received (source for the Arduino and the notes.h header file). When a new message is received, the Arduino lights up the envelope icon and plays a short sound on the attached speaker.

There are a few improvements [Brad] plans to add to his orangered indicator. First up is getting an Ethernet shield and discarding the server attached to the Arduino. Next up is different lights and tones for different types of messages (PMs, comment replies, and mod mail). Of course the top of our list for [Brad]’s future improvements is actually making the LEDs orangered, but it’s still a very awesome build to allow [Brad] to waste even more time on the Internet’s time sink.

Video after the break.

Continue reading “Physical Orangered Notifies You Of Reddit Messages” →

Stacking GPS, GSM, And An SD Card Into An Arduino Shield

October 19, 2012 by Brian Benchoff 18 Comments

A few years ago, [Phang Moh] and his compatriots were asked by a client if they could make a vehicle tracking device for oil tankers all around Indonesia. The request of putting thousands of trackers on tanks of explosives was a little beyond [Phang Moh]’s capability, but he did start tinkering around with GPS and GSM on an Arduino.

Now that tinkering has finally come to fruition with [Phang]’s TraLog shield, a single Arduino shield that combines GPS tracking with a GSM and GPRS transceiver. There’s also an SD card thrown in for good measure, making this one of the best tracking and data logging shields for the Arduino.

The shield can be configured to send GPS and sensor data from devices attached to an I2C bus to remote servers, or a really cool COSM server. [Phang] is selling his TraLog for $150, a fairly good deal if you consider what this thing can do.

Seems like the perfect piece of kit for just about any tracking project, whether you want to know the location of thousands of oil tankers or just a single high altitude balloon.

Tip ‘o the hat to [Brett] for finding this one.

Hacking Beer Cans For Fun And Publicity

October 19, 2012 by Jeremy Cook 3 Comments

Although beer is generally a good way to get people to come to your trade show booth, [Robofun.ru] decided to put a new spin on things. Instead of (or possibly in addition to) giving out beer, they decided to turn 40 Staropramen beer cans into a keyboard.

This was done using an Arduino hooked up to four Sparkfun MPR121 Capacitive Touch Sensor Breakout Boards, allowing them to act as keys. These inputs are translated via the Arduino into a standard output (we assume USB) that can be plugged into any computer. Additionally, a Sparkfun MP3 trigger board was used to control the sound effects. Rounding out the build, a Raspberry Pi computer was used to run the human machine interface, a large plasma display.

Be sure to check out this keyboard in action after the break. If this isn’t enough alternative input fun, why not check our post about how to make a banana piano and giant NES controller. Continue reading “Hacking Beer Cans For Fun And Publicity” →

Nebulophone Microcontroller Synthesizer Project Sounds Great

October 17, 2012 by Mike Szczys 11 Comments

Judging from the video (found after the break) the Nebulophone is one of the best sounding DIY synthesizers we’ve seen. Especially when you consider the simplicity of the hardware design. It uses an AVR chip and an OpAmp. The rest of the parts are just a few handfuls of inexpensive components.

The device was developed by Bleep Labs, and they sell the synthesizer kit seen on the left. But since it’s an open source project you can follow their design to fabricate your own, which is what [BlinkyBlinky] did with his offering seen to the right.

An ATmega328 drives the device, which is the chip often used in the Arduino Duemilanove. The keyboard is a set of traces hooked to the microcontroller. These are tinned pads on the kit PCB, but the DIY version simply uses some adhesive copper foil with a jumper wire soldered to it. The keys are played with a probe that makes the electrical connection, a common practice on these stylophone type designs. Chances are you have everything on hand to make this happen so keep it in mind for that next cold winter weekend that’s making everyone a bit stir crazy.

Continue reading “Nebulophone Microcontroller Synthesizer Project Sounds Great” →

Arduino Parking Lot Attendant

October 15, 2012 by Mike Szczys 25 Comments

Here’s an automatic parking gate for toy cars. There’s no need to press a button, the electronics detect the presence of a vehicle on either side of the gate, raising it after verifying that the lot is not already full. It’s the same idea as counting how many people enter a room in order to switch the lights but the hardware is just a bit different.

The system is controlled by a pair of sensors in the paper which serves as the parking lot. There are three sheets of heavy stock, the top and bottom both have aluminum foil on them, with the center layer as a separator. There are holes cut in the separator where the hash marks are seen above. By adding a little pressure to the car when you drive it up to the gate this completes a circuit instructing the Arduino that there’s a vehicle in position.

You can see a demonstration, as well as the guts of the build, in two videos after the break.

Continue reading “Arduino Parking Lot Attendant” →

Cellular Vehicle Information And Control

October 13, 2012 by Mike Szczys 14 Comments

This hardware, which was built as a Computer Engineering project by [Bryon] and his classmates, gives you feedback and control of a car though a cellular phone network. It uses text messages to communicate with a control device. This can be pretty much any cellphone, but in the clip after the break they show off an Android app which puts a pretty GUI in front of you and abstracts away the tedium of specially formatted messages.

At the heart of the system is an Arduino Mega board. It has a cellular shield with an external antennae for connectivity. A GPS device, relay board, and ODB-II module provide feedback and control to the system. The relays allow the car to be started and the doors to be locked. The GPS and ODB-II module can send back location and vehicle information (anything available from the car’s sensors). There were some issues with the text messages being blocked during testing. The team thinks that the automated back-and-forth triggered some kind of spam filter from the telecom.

There’s still more work to be done if they want to actually drive the car via remote control.

Continue reading “Cellular Vehicle Information And Control” →