Looking Forward To EMF 2024

May 29, 2024 by Jenny List 10 Comments

It’s that time of year again when some parts of our community travel out into the countryside to spend time with each other under canvas in a field somewhere with power and fast internet — it’s hacker camp season. Here in Europe that means it’s the turn of the British hackers to have the year’s large event, in the form of the latest incarnation of Electromagnetic Field. We’ll be there, camera and microphone in hand, and with luck we’ll be able to bring you a flavour of the event.

The atmosphere that comes from being in the company of several thousand like minds is stimulating enough, but what makes these outdoor events special is that the villages become so much more than simply a group of geeks at a table with their laptops. Where else can one find a tea room run by a hackerspace except courtesy of MK Makerspace, or a fully functional pop-up motor racing circuit from Hacky Racers?

This year’s event badge is an interesting one, the ESP32-S3 powered and hexagon-shaped Tildagon. It’s a bold attempt to redefine the event badge away from a one-off trinket into one that lasts across multiple events, with custom “Hexpansions” like the petals on a flower, intended to have new ones appear on an event by event basis.

If you’re going to be at EMF then maybe we can join you for a pint, otherwise we’ll be bringing you the best that we find there. To whet your appetite, here’s something of the last one.

Supercon 2023: Exploring The Elegance Of The Voja4

May 20, 2024 by Tom Nardi 7 Comments

When you design an electronic badge, the goal is to make a device that’s interesting and has enough depth to keep your attendees engaged for the duration of the con but not so complicated that they can’t become proficient with it before they have to head home. It’s a difficult balance to nail down, and truth be told, not every Supercon badge has stuck the landing in this regard.

But if you’ve really done things right, you’ll create a piece of hardware that manages to outlive the event it was designed for. A badge that attendees continue to explore for months, and potentially even years, afterward. If the talk “Inside the Voja4” by Nathan Jones is any indication, we think it’s safe to say that goal was achieved with the Supercon 2022 badge.

During this forty-minute presentation, Nathan discusses what makes the 4-bit badge so fascinating from a technical standpoint and how it could theoretically be expanded to accomplish far more complex tasks than one might assume at first glance.

Continue reading “Supercon 2023: Exploring The Elegance Of The Voja4” →

Hackaday Supercon 2024 Call For Participation: We Want You!

May 15, 2024 by Elliot Williams 9 Comments

We’re tremendously excited to be able to announce that the Hackaday Supercon is on for 2024, and will be taking place November 1st through the 3rd in sunny Pasadena, California. As always, Supercon is all about you, the Hackaday community. So put on your thinking caps because we’d like to hear your proposals for talks and workshops! The Call for Speakers and Call for Workshops forms are online now, and you’ve got until July 9th to get yourself signed up.

Supercon is a fantastic event to geek out with your fellow hackers, and to share the inevitable ups and downs that accompany any serious project. Like last year, we’ll be featuring both longer and shorter talks, and hope to get a great mix of both first-time presenters and Hackaday luminaries.

Honestly, just the crowd that Supercon brings together is reason enough to attend, but then you throw in the talks, the badge-hacking, the food, and the miscellaneous shenanigans … it’s an event you really don’t want to miss. And as always, presenters get in for free, get their moment in the sun, and get warm vibes from the Hackaday audience. Get yourself signed up now!

Supercon 2023: Building The Ultimate Apple IIe, Decades Later

May 14, 2024 by Lewin Day 3 Comments

The Apple II was launched in 1977, a full 47 years ago. The Apple IIe came out six years later, with a higher level of integration and a raft of new useful features. Apple eventually ended production of the whole Apple II line in 1993, but that wasn’t the end. People like [James Lewis] are still riffing on the platform to this day. Even better, he came to Supercon 2023 to tell us all about his efforts!

[James]’s talk covers the construction of the Mega IIe, a portable machine of his own design. As the name suggests, the project was based on the Mega II chip, an ASIC for which he had little documentation. He wasn’t about to let a little detail like that stop him, though.

The journey of building the Mega IIe wasn’t supposed to be long or arduous; the initial plan was to “just wire this chip up” as [James] puts it. Things are rarely so simple, but he persevered nonetheless—and learned all about the Apple II architecture along the way.

Continue reading “Supercon 2023: Building The Ultimate Apple IIe, Decades Later” →

Supercon 2023: MakeItHackin Automates The Tindie Workflow

May 7, 2024 by Arya Voronova 2 Comments

Selling your hardware hacks is a great way to multiply your project’s impact, get your creations into others’ hands, and contribute to your hacking-related budget while at it. If you’re good at it, your store begins to grow. From receiving a couple orders a year, to getting one almost every day – if you don’t optimize the process of mailing orders out, it might just start taking a toll on you.

That is not to say that you should worry – it’s merely a matter of optimization, and, now you have a veritable resource to refer to. At Supercon 2023, [MakeItHackin]/[Andrew] has graced us with his extensive experience scaling up your sales and making your shipping process as seamless as it could be. His experience is multifaceted, and he’s working with entire four platforms – Tindie, Lectronz, Etsy and Shopify, which makes his talk all that more valuable.

[MakeItHackin] tells us how he started out selling hardware, how his stores grew, and what pushed him to automate the shipping process to a formidable extent. Not just that – he’s developed a codebase for making the shipping experience as smooth as possible, and he’s sharing it all with us.

Continue reading “Supercon 2023: MakeItHackin Automates The Tindie Workflow” →

Supercon 2023: Jose Angel Torres On Building A Junkyard Secure Phone

May 1, 2024 by Arya Voronova 10 Comments

If you ever wondered just what it takes to build a modern device like a phone, you should have come to last year’s Supercon and talked with [Jose Angel Torres]. He’s an engineer whose passion into investigating what makes modern devices tick is undeniable, and he tells us all about where his forays have led so far – discovering marvels that a Western hacker might not be aware of.

Six years ago, he has moved to China, having previously been responsible for making sure that their Chinese subcontractors would manufacture things in the right ways. Turns out, doing that while being separated by an ocean set up more than just the timezone barriers – they were communicating between different worlds.

[Jose] tells us of having learned Chinese on the spot, purely from communicating with people around him, and it’s no wonder he’s had the motivation! What he’s experienced is being at the heart of cycle of hardware life, where devices are manufactured, taken apart and rebuilt anew. Here’s how he tapped into that cycle, and where he’s heading now.

Continue reading “Supercon 2023: Jose Angel Torres On Building A Junkyard Secure Phone” →

Supercon 2023: Alex Lynd Explores MCUs In Infosec

April 24, 2024 by Tom Nardi 9 Comments

The average Hackaday reader hardly needs to be reminded of the incredible potential of the modern microcontroller. While the Arduino was certainly transformative when it hit the scene, those early 8-bit MCUs were nothing compared to what’s on the market now. Multiple cores with clock speeds measured in the hundreds of megahertz, several MB of flash storage, and of course integrated WiFi capability mean today’s chips are much closer to being fully-fledged computers than their predecessors.

It’s not hard to see the impact this has had on the electronics hobby. In the early 2000s, getting your hardware project connected to the Internet was a major accomplishment that probably involved bringing some hacked home router along for the ride. But today, most would consider something like an Internet-connected remote environmental monitor to be a good starter project. Just plug in a couple I2C sensors, write a few lines of Python, and you’ve got live data pouring into a web interface that you can view on your mobile device — all for just a few bucks worth of hardware.

But just because we’re keenly aware of the benefits and capabilities of microcontrollers like the ESP32 or the Pi Pico, doesn’t mean they’ve made the same impact in other tech circles. In his talk Wireless Hacking on a $5 Budget, Alex Lynd goes over some examples of how he’s personally put these devices to work as part of his information security (infosec) research.

Continue reading “Supercon 2023: Alex Lynd Explores MCUs In Infosec” →