Tunes In The Icebox

June 4, 2012 by Mike Szczys 29 Comments

A couple of years back [Bryan’s] iPod went on the fritz. It wasn’t completely broken, as long as he kept it really cold it still worked. So what was he to do with the crippled device? We’ve all heard of elevator music. [Bryan] decided to invent refrigerator music.

First he needed some speakers. A trip to the Goodwill store netted him a pair for under $5. They need A/C power, and the project depends on sensing when the door to the refrigerator is open. He killed two birds with one stone by adding a light socket outlet adapter. This provides a place to plug in the speakers’ power adapter, and it only gets juice when the door is opened. The gimpy iPod just constantly loops through the tracks stored within, but you’ll only hear it when the door is open and the speakers receive power. Of course the iPod will eventually run its own battery down so [Bryan] ran an extension cord out the side of the door to a wall outlet. This interrupts the door seal and we wish there were another way to keep it contained within.

A Sample Player You Can Slip In Your Pocket

May 29, 2012 by Mike Szczys 8 Comments

This portable sample player packs quite a punch. [Lee] wanted a nice portable way to take his samples with him, but refused to water-down the features just because it is portable. He set of goal of playing between 3-8 simultaneous notes from a large assortment of stored samples.

Sample space was the first design consideration, and it’s hard to beat the price per megabyte of an SD card. After some calculations he concluded that it is possible to pull these samples off the card quickly enough to achieve his simultaneous note goal at CD quality frequencies, but only if there is little or no latency when reading from the card. This means [Lee] needed a fast processor so he chose the LPC1769 which is an ARM Cortex-M3 processor which can run at 120 MHz.

The project box includes room for a volume knob to control the output from the in-build headphone amplifier. There’s also a rotary encoder for selecting sample sets. But we’re a bit confused on this part as the device is MIDI controlled. [Lee] is the creator of the electronic Moolodeon, which itself has MIDI out and will be used as a controller for this project.

The Styharp, An Instrument Modeled After A Pig Sty

May 28, 2012 by Caleb Kraft 4 Comments

This is a first for us. We’ve never heard of an instrument modeled after a pig sty before. The Styharp, built by [Yann Seznec], for [Matthew Herbert] is meant to be a mix between performance and visual art. [Matthew]’s followed a pig from birth to the plate and made an album from the sounds he recorded. The project is called “one pig”. This would explain the reason behind modeling an instrument after a sty.

[Yann] started with a Gametrak controller, basically a reel of line connected to a potentiometer. He ended up using 12 of these, which each have 3 outputs. This gave him plenty of ways change the sound during the performance. You can see a little bit of him demoing it after the break.

Continue reading “The Styharp, An Instrument Modeled After A Pig Sty” →

Reading Wax Cylinders With Lasers

May 27, 2012 by Caleb Kraft 19 Comments

From 1902 to 1905, Polish anthropologist [Bronislow Pilsudski] did a series of recordings in Hokkaido japan on wax cylinders. Researchers at the university of Hokkaido have been working on ways to read the cylinders without causing any further damage to the grooves. Their preferred method has been to use reflected laser light. They have a very short writeup on their configuration, but it should be enough to get the idea.

Another project they’ve taken on is reading the original molds as well. They had to completely reconfigure their device to be able to be inserted into the cylinder. The quality they get from those is far superior though.

[Jeri] Builds A C64 Bass Keytar

May 23, 2012 by Caleb Kraft 23 Comments

[Jeri] built this really cool C64 bass Keytar from a commodore64 and a cheap bass guitar. She’s using an FPGA to do the string detection and the key scanning, it then sends everything to the original 8bit sound chips. The reason that she is using a bass guitar is that the commodore sound chip only has 3 channels. There’s an interview with her from the maker faire, and if you keep watching, there are some other interesting projects too.

She notes that the implementation she went with has many performance issues due to the overtones the strings create when played. If she did it again, she’d go another route. Since [Jeri] has previously created the fully functional C64 games on FPGA, maybe she’ll add some video synth to this down the road.

A New Method For Adding Audio Input To A Sansa Clip+

May 18, 2012 by Mike Szczys 7 Comments

The Sansa Clip+ is a nice little MP3 player and recorder. But it doesn’t offer an input connector, instead relying on the built-in microphone. [Simon Frank] wanted to extend its functionality so he figured out how to add a standard audio jack for analog input.

This is not the first time this has been done, but [Simon] has found a different method of accomplishing the task at hand. The other external input hack we saw cannibalized the internal microphone, rerouting its connections as an external input. But the method seen here keeps that microphone intact. The device includes an FM radio chip which is attached to an ADC on one of the devices other integrated circuits. [Simon] just patched into those signals. Now all he has to do is set up the device to record from the radio and connect his source to the jack which he epoxied to the base of the enclosure.

Hackaday Links May 9th 2012

May 9, 2012 by Jeremy Cook 18 Comments

Homecut – CNC Cutting Directory

So you have a CNC machine that you use as a hobby, but would like to do some actual work on the side? Or maybe you have an idea you’d like made. Homecut is a map directory where you can maybe hook up with the right person.

The Curta Mechanical Calculator

As [leehart] mentioned in our comments section, the Curta mechanical calculator is a truly ingenious piece of engineering. A quick Google search should find all kinds of information on it, but this article could be a good place to start for some mechanical hacking inspiration!

Luxman Amplifier DAC Upgrade

[R. Barrios] wasn’t happy with using the sound card for his HTPC setup, so decided to add a DAC module onto his reciever. The resulting audio quality was very good, and the build came out quite clean. Check it out if you’re thinking of a hack-upgrade to your stereo equipment.

3D Printable Tilt-Shift Adapter

A tilt-shift lens a neat piece of equipment that is used to make a large scene look like they were miniatures. It’s a cool effect, but professional lenses to do this can cost thousands of dollars. This Instructable tells you how to go about printing your own. For more info on the technique itself, check out this Wikipedia article.

New 3D Printer on the Block

If you would like to take the plunge into 3D printing, but are looking for somewhere to get a parts kit, the [ORD Bot Hadron 3D Printer] may be worth a look. The build quality looks great, and the price for the mechanical components is quite reasonable at $399. You’ll need to provide the electronics and extruder. Thanks [comptechgeek]!