MIDI Sequencer/controller

June 13, 2009 by Gerrit Coetzee 12 Comments

lenonluks

Reader, [Lennon Luks] made a really slick MIDI sequencer/controller for his senior design project while studying at Western Carolina University. It has a grid of 64 LED buttons, 8 knobs, and a display with navigation buttons that allow him to sequence tracks with or without a computer. The controller is based off an ATmega644 and is programmed in C. [Lennon] clearly explains the inner workings of the project in detail on his website and has included a good number of pictures. [Lennon] made a nice video of the project which can be seen after the jump.

Continue reading “MIDI Sequencer/controller” →

Electronic Stethoscope

June 2, 2009 by Caleb Kraft 35 Comments

[Vik] sent in this simple little project. He purchased a $3 spy ear, a simple 3 transistor amplifier, and attached a stethoscope end. Little modification was necessary, mainly just scraping a bit more space in the microphone tube. The end result is a super cheap electronic stethascope that can be hooked to a computer or other speakers for multiple people to listen to.

Pikachu Circuit Bent Goggles

June 2, 2009 by Caleb Kraft 40 Comments

pikachu_goggle1 (Custom)

These nifty looking goggles are actually an instrument. The guts of a pikachu doll have been splayed and mounted to the goggles. The controller is an external box that allows you to make all kinds of changes to the pitch and sample section. You can see a video of it after the break. We don’t really find this to be great music, but find watching the guy fairly amusing.

Continue reading “Pikachu Circuit Bent Goggles” →

McBlare: A Robot Bagpipe Player

May 29, 2009 by Caleb Kraft 24 Comments

We all want our very own personal bagpiper. Playing it ourselves is too much effort, and keeping a full time bagpiper around can be a pain. You have to feed them, clothe them, give them union breaks, etc. Luckily, modern technology has come to the rescue again. You can have your very own robot bagpiper. McBlare plays the bagpipe with technical proficiency that would be impossible for most humans. But lets hear it put some soul into it.

[via BotJunkie]

Soldering Headphone Wire

May 24, 2009 by Caleb Kraft 61 Comments

Many people find themselves frustrated when working with headphones. The tiny coated wire can be a real pain to work with. They are so very very small, and usually coated. We generally just end up doing a quick “sand and tape” which just isn’t very high quality. [Alex] sent in some tips that can really help you get those repairs or modifications going.

Laser Cut Drum Kit

May 22, 2009 by Caleb Kraft 14 Comments

drums

[Segwaymonkey] picked up an arduino based drumkit circuit and needed a kit to place it on. He worked up a pretty cool design and had it laser cut out of acrylic. The cool part of the design is how he delt with the head motion of the drum. Each head has 4 “springs” that were also cut from the acrylic. The Arduino based drum circuit sits on a little pedestal in the middle, as though it were on display. We really like the design, but we have to wonder if a little noise dampening on the heads might be a good idea. He hasn’t released the plans, but says he might once he gets it perfect.

Irregular Incurve Robotic Instrument

May 12, 2009 by Eliot 13 Comments

irregular_incurve

The Irregular Incurve is a robotic instrument built by [Xiaoyang Feng] as part of his ITP thesis work. It’s a MIDI instrument with an array of 12 strung bows mounted to a curved shower rod. The end of each bow has a tuning key. The strings are each picked using independently mounted arms. One servo controls the downward motion of the pick while the other controls the rotation of the shaft. A damper is also attached to each arm. The string vibrations are transferred to a spruce soundbox under the bridge. Below you can see a video of Gizmodo playing with it at the ITP show. Check out [Xiaoyang]’s Flickr set for images of the build process plus some early videos of the mechanism.

Continue reading “Irregular Incurve Robotic Instrument” →