Ham Radio In The Internet Age

October 25, 2024 by Al Williams 66 Comments

Even if you are relatively young, you can probably think back on what TV was like when you were a kid and then realize that TV today is completely different. Most people watch on-demand. Saturday morning cartoons are gone, and high-definition digital signals are the norm. Many of those changes are a direct result of the Internet, which, of course, changed just about everything. Ham radio is no different. The ham radio of today has only a hazy resemblance to the ham radio of the past. I should know. I’ve been a ham for 47 years.

You know the meme about “what people think I do?” You could easily do that for ham radio operators. (Oh wait, of course, someone has done it.) The perception that hams are using antique equipment and talking about their health problems all day is a stereotype. There are many hams, and while some of them use old gear and some of them might be a little obsessed with their doctor visits, that’s true for any group. It turns out there is no “typical” ham, but modern tech, globalization, and the Internet have all changed the hobby no matter what part of it you enjoy.

Radios

One of the biggest changes in the hobby has been in the radio end. Hams tend to use two kinds of gear: HF and VHF/UHF (that’s high frequency, very high frequency, and ultra-high frequency). HF gear is made to talk over long distances, while VHF/UHF gear is for talking around town. It used to be that a new radio was a luxury that many hams couldn’t afford. You made do with surplus gear or used equipment.

Globalization has made radios much less expensive, while technological advances have made them vastly more capable. It wasn’t long ago that a handy-talkie (what normal folks would call a walkie-talkie) would be a large purchase and not have many features. Import radios are now sophisticated, often using SDR technology, and so cheap that they are practically disposable. They are so cheap now that many hams have multiples that they issue to other hams during public service events.

Continue reading “Ham Radio In The Internet Age” →

Hacker Tactic: Building Blocks

October 24, 2024 by Arya Voronova 11 Comments

The software and hardware worlds have overlaps, and it’s worth looking over the fence to see if there’s anything you missed. You might’ve already noticed that we hackers use PCB modules and devboards in the same way that programmers might use libraries and frameworks. You’ll find way more parallels if you think about it.

Building blocks are about belonging to a community, being able to draw from it. Sometimes it’s a community of one, but you might just find that building blocks help you reach other people easily, touching upon common elements between projects that both you and some other hacker might be planning out. With every building block, you make your or someone else’s next project quicker, and maybe you make it possible.

Sometimes, however, building blocks are about being lazy.

Continue reading “Hacker Tactic: Building Blocks” →

Will .IO Domain Names Survive A Geopolitical Rearrangement?

October 23, 2024 by Lewin Day 46 Comments

The Domain Name System (DNS) is a major functional component of the modern Internet. We rely on it for just about everything! It’s responsible for translating human-friendly domain names into numerical IP addresses that get traffic where it needs to go. At the heart of the system are the top-level domains (TLDs)—these sit atop the whole domain name hierarchy.

You might think these TLDs are largely immutable—rock solid objects that seldom change. That’s mostly true, but the problem is that these TLDs are sometimes linked to real-world concepts that are changeable. Like the political status of various countries! Then, things get altogether more complex. The .io top level domain is the latest example of that.

Continue reading “Will .IO Domain Names Survive A Geopolitical Rearrangement?” →

In Its Second Year, JawnCon Was Bigger And Better

October 22, 2024 by Tom Nardi 7 Comments

Starting a hacker con is hardly what anyone would describe as easy — but arguably, the truly difficult part is keeping the momentum going into the second year and beyond. For the first year, you can get away with a few missed opportunities and glitches, but by the time you’ve got one event under your belt, you’ll have set the bar for what comes next. There’s pressure to grow, to make each year bigger and better than before. All the while, making sure you don’t go broke in the process. Putting on a single hacker con is an achievement in and of itself, but establishing a long-running hacker con is a feat that relatively few groups have managed to pull off.

With this in mind, the incredible success of the second annual JawnCon is all the more impressive. The Philadelphia-area event not only met the expectations of a sophomore effort, but exceeded them in pretty much every quantifiable way. From doubling attendance to providing a unique and immersive experience with their electronic badge, the team seized every opportunity to build upon the already strong foundation laid last year. If this was the make-or-break moment for the Northeast’s newest hacker con, the future looks very bright indeed.

But before setting our sights on next year, let’s take a look at some of the highlights from JawnCon 0x1. While you can watch all of this year’s talks on YouTube, the aspect of a hacker on that can’t easily be recorded is the quality time spent with like-minded individuals. Unfortunately, there’s no way to encompass everything that happened during a two-day con into a single article. Instead, this following will cover a few of the things that stood out to me personally.

If you’d like to experience the rest of JawnCon, you’ll just have to make the trip out to Philly for 2025.

Continue reading “In Its Second Year, JawnCon Was Bigger And Better” →

An SAO For Hams

October 21, 2024 by Al Williams 18 Comments

Generally speaking, the Hackaday Supercon badge will always have a place for SAO (rebranded as “Supercon add-ons”), and that makes sense. We did originate them, after all. This year, though, we’ve gone all in on SAO, and, in particular, we’ve asked to see more SAOs with communication capabilities. The standard has always had an I2C bus, but few people use them. I decided I wanted to set an example and cook up a badge for Supercon. Was it hard? Yes and no. I’ll share with you a little about the board’s genesis and the issues I found. At the end, I’ll make you a special offer, if you are going to Supercon.

The Idea

The front of the SAOGNR — the SAO connector is, of course, on the back

I’ve been a ham radio operator for a very long time. In fact, July was my 47th anniversary in the radio hobby. Well, that’s not true. It was my 47th year with a license. I had been listening to shortwave long before then. So, I wanted to do something with Morse code. You don’t have to know Morse code to get a license these days, but a lot of hams enjoy it.

I set out to do a simple board that would play some Morse code messages. But that’s just another blinking light LED with a buzzer on it, too. So, naturally, I decided it would also provide Morse code output for the I2C host. That is, the SAO could be used to convert ASCII to Morse code. Sounds simple, right? Sure.

Getting Started

I wanted to use a Raspberry Pi Pico but didn’t want to violate the SAO size requirements. Luckily, there’s an RP2040-Zero module that is quite tiny and looks more or less like a normal Pico. The two big differences are plusses: they have a reset button, and instead of a normal LED, they have a WS2812b-style LED.

Continue reading “An SAO For Hams” →

A Hacker’s Travel Guide To Europe

October 18, 2024 by Jenny List 55 Comments

This summer, I was pleasantly surprised when a friend of mine from Chicago turned up at one of the hacker camps I attended. A few days of hanging out in the sun ensued, doing cool hacker camp stuff, drinking unusual beverages, and generally having fun. It strikes me as a shame that this is such a rare occurrence, and since Hackaday is an American organisation and I am in a sense writing from its European outpost, I should do what I can to encourage my other friends from the USA and other parts of the world to visit. So here I’m trying to write a hacker’s guide to visiting Europe, in the hope that I’ll see more of you at future camps and other events.

It’s Intimidating. But Don’t Worry.

Danish road sign: "Se efter tog", or according to Google Translate: "Look for trains". — Yes. We’d find this intimidating, too. Bewitchedroutine, Public domain.

First of all, I know that it’s intimidating to travel to an unfamiliar place where the language and customs may be different. I’m from England, which sits on a small island in the North Atlantic, and believe it or not it’s intimidating for us to start traveling too. It involves leaving the safety of home and crossing the sea whether by flight, ferry, or tunnel, and that lies outside one’s regular comfort zone.

Americans live in a country that’s almost a continent in its own right, so you can satisfy your travel lust without leaving home. Thus of course the idea of landing in Germany or the Netherlands is intimidating. But transatlantic flights are surprisingly cheap in the scheme of international travel because of intense competition, so I’m here to reassure you that you can travel my continent ‘s hacker community without either feeling out of your depth, or breaking the bank.

Continue reading “A Hacker’s Travel Guide To Europe” →

Mining And Refining: Mine Dewatering

October 17, 2024 by Dan Maloney 8 Comments

From space, the most striking feature of our Pale Blue Dot is exactly what makes it blue: all that water. About three-quarters of the globe is covered with liquid water, and our atmosphere is a thick gaseous soup laden with water vapor. Almost everywhere you look there’s water, and even where there’s no obvious surface water, chances are good that more water than you could use in a lifetime lies just below your feet, and accessing it could be as easy as an afternoon’s work with a shovel.

And therein lies the rub for those who delve into the Earth’s depths for the minerals and other resources we need to function as a society — if you dig deep enough, water is going to become a problem. The Earth’s crust holds something like 44 million cubic kilometers of largely hidden water, and it doesn’t take much to release it from the geological structures holding it back and restricting its flow. One simple mineshaft chasing a coal seam or a shaft dug in the wrong place, and suddenly all the hard-won workings are nothing but flooded holes in the ground. Add to that the enormous open-pit mines dotting the surface of the planet that resemble nothing so much as empty lakes waiting to fill back up with water if given a chance, and the scale of the problem water presents to mining operations becomes clear.

Dewatering mines is a complex engineering problem, one that intersects and overlaps multiple fields of expertise. Geotechnical engineers work alongside mining engineers, hydrogeologists, and environmental engineers to devise cost-effective ways to control the flow of water into mines, redirect it when they can, and remove it when there’s no alternative.

Continue reading “Mining And Refining: Mine Dewatering” →