Door Hidden By Bookcase Is A Marvel Of DIY Engineering

February 22, 2013 by Mike Szczys 88 Comments

Taking on a giant build just to hide your shotgun collection may seem a bit over the top. But we couldn’t be more impressed with the project. [Korostelevm] did an amazing job of hiding a small closet with a bookcase-door. It’s something straight out of a Hardy Boys novel.

Possibly the most important part of the build is figuring out how to hinge all the weight a bookcase will carry. His solution was to use a set of four heavy-duty casters. He cut off the wheels from one pair and the mounting brackets from another. By welding the brackets on in place of the wheels he has a sturdy way to mount both the frame and the bookcase. When closed the unit latches using a strike plate and lock set from a door. This is connected to a book using some cabling and pulleys. As you’d expect, just find the right hard-cover and tilt it toward you to open the hidden storage behind. [Korostelevm] shows off the final product after the jump.

Continue reading “Door Hidden By Bookcase Is A Marvel Of DIY Engineering” →

Hacking A Coffee Machine For A Better Brew

February 14, 2013 by Eric Evenchick 33 Comments

Senseo coffee makers are automated brewers that use coffee pods. [Ronald] had one, but wasn’t satisfied with the quality of the coffee it produced. His solution was to hack it apart and build his own automatic coffee machine with the innards.

The coffee brewing part of the system is controlled by an ATmega8. This reads the temperature using the NTC sensor from the original machine and actuates the various parts of the Senseo machine, and the added grinder. The timing was all done by trial and error, optimizing for the best cup of coffee.

Keeping with the trend of adding Raspberry Pis to everything, [Ronald] connected one to this build for remote control. He runs a very hacked version of LCD2USB which deals with communicating with the RPi. An Apache web server hosts a PHP script to provide a user interface, which runs a C program to tell the system to start brewing.

Unfortunately, [Ronald] didn’t give us a link to his web interface, so we can’t remotely brew him coffee. However he did provide all of the source for the project in his write up.

A Pair Of Automatic Fish Feeders

February 8, 2013 by Mike Szczys 3 Comments

a-pair-of-automatic-fish-feeders

Sometime the hacking topics come in waves. For instance, we were tipped off about this pair of automatic fish feeders just an hour apart from each other. Maybe it’s that time of year when people are about to go on Holiday and want to make sure their marine pets don’t go hungry?

The feeder on the left is a true hack. It’s built from a pair of servos and a pill bottle. An ATtiny85 drives the motors. One is mounted to the other, allowing the cap which catches and distributes the food to move along two axes. When it rotates into place under the pill bottle it bumps against a stick to open a flapper releasing more food.

On the right is a feeder that precisely doses the food. That’s because it includes a separate chamber for each feed. A worm gear drives the hopper, with screw heads pressing against a leaf switch for position feedback. This one is well designed and built to last.

Wall Votive Display Controlled With A Glowing Cube

February 6, 2013 by Mike Szczys 6 Comments

wall-votive-display

This wall hanging would look great even if it did no more than light up. But thanks to a unique controller it’s meant to work as an interactive display for your living area.

The rectangles and votive candle cups are a set of three store-bought hangings. But lighting the candles and remembering to blow them out was a pain, so [Adiel Fernandez] decided to add the LEDs to make the job easier. But why stop at that, in addition to an RGB light for each cup he made them fully addressable. It’s all the better for a light show, but this also opens up the arena for all manner of different uses.

Accompanying the wall installation is a palm-sized cube meant to sit on the coffee table. Whichever side of the cube us up sets the function for the display, with a rotation tweaking the function, and a fast spin used as a select. If the power icon is on the side facing up, a fast spin will turn the display on or off. There are also functions for weather, temperature, transportation (we were thinking something like a bus schedule notifier but it’s actually a bit different) and animation patterns. After the break you can watch a demo of the cube functionality.

Continue reading “Wall Votive Display Controlled With A Glowing Cube” →

Complete Siri Home Automation Controls Everything But The Kitchen Sink

February 6, 2013 by Mike Szczys 30 Comments

complete-siri-home-automation

[Elvis Impersonator] spent three full days but in that time he managed to hand control of everything in his house over to Siri. The technique used is a familiar one. A Raspberry Pi running SiriProxy listens for commands from the iPhone and acts on them based on [Elvis’] predefined configuration. The difference here is that it’s not just a single device (read: lamp) that is being controlled to prove the concept. His video (embedded after the break) shows him operating an entire range of devices in his home.

The demonstration starts off with his garage door being opened and closed. From the YouTube video description we know that he’s using Trendnet IP cameras and it looks like one of them lets him see if he remembered to close the garage. Next he disarms his home security system as shown in the image above. From there he adjusts the Nest thermostat, switches off the living room lights, and changes the TV channels.

We think the need to give voice commands would get old pretty quickly. But that aside we applaud his work to pull everything together into one single interface.

Continue reading “Complete Siri Home Automation Controls Everything But The Kitchen Sink” →

Rack Mount Home Automation With A RPi

February 6, 2013 by Eric Evenchick 19 Comments

[Patrick] wanted to have centralized sensing and control over various parts of his house. His Raspberry Pi Home Automation System integrates a bunch of functionality in one rack mount package, salvaged from an old network switch.

The automation system is based on a Raspberry Pi running Arch Linux, which talks to an ATmega over SPI. We’ve seen this setup used many times before to add additional ports to the Raspberry Pi, but what makes [Patrick]’s build unique is the amount of control he’s built into the system.

The box controls outdoor lighting at sunset and sunrise, generates wakeup calls, controls IR cameras, and plays sounds based on events. It’s capable of monitoring sump pump water level, the state of a house alarm, and more. A custom REST API is used to interact with the device. This allows for programs on any platform to interface with his home, and acts as an API for his house.

[Patrick] provides a lot of details in his build log, which should be helpful to anyone looking to roll their own home automation system. The source is also provided.

Feedback For Automated Water And Food Pet Dispensers

January 30, 2013 by Mike Szczys 13 Comments

pet-food-and-water-automation

[Enrico] figured out a way to fully automate his pet food and water. The system is in two parts, the water trough as seen on the left, and the food dispenser whose control hardware is shown on the right. The system is even hooked up to the network so that he can make sure it didn’t break down while he was away.

The water dispenser uses parts from a sprinkler system. Since it’s mounted outdoors it doesn’t matter if the water overflows a little bit. So [Enrico] set up the timer to run the water for three minutes every day. This acts as a backup system since the trough already has the ability to refill itself.

The food dispenser started as a commercial unit. To get feedback from the system he added a couple of magnets to the agitation motor and reads them with a hall effect sensor. In addition to an IP camera that monitors the area around the feeder (so [Enrico] can actually see his dog eating) there is a webcam which monitors the STM32 Discovery board which monitors the feeder. It tracks the number of times the dispenser has run.