Great Ball Contraption

June 15, 2010 by Mike Szczys 18 Comments

[youtube=http://www.youtube.com/watch?v=B1A7VpQ5paU]

The idea of the Great Ball Contraption is to take modules from many builders and combine them into one large machine. The modules need to find some way of moving LEGO soccer balls and basketballs from an input point to an exit are that passes them onto the next module. Some of them sort the balls, but in the end the eight-and-a-half-minute video above shows the orbs going around and around. That’s just fine with us, it’s no secret that we love machines that are overly complicated and may be completely useless.

Monster Chess

June 14, 2010 by Jakob Griffith 24 Comments

Over 100,000 Lego pieces, 4 people a year to create, and a 12 foot by 12 foot chess board make this the largest most awesome Lego hack we’ve ever seen. Take that Lego Printer.

For a mere $30,000 you too can have such a setup. Not a lot of information is out yet, but we do know all the pieces are remote controlled via a PC with LabVIEW and a total of 38 NXT controllers are used. Oh, and of course you can see it live at the 2010 Brickworld. Check out a video of a replayed game after the jump.

[via Geekologie]

Continue reading “Monster Chess” →

Pressurized PVC Water Gun

June 11, 2010 by Mike Szczys 34 Comments

Hackaday’s [Caleb Kraft] has branded today “kiddie d-day” after seeing this PVC water gun follow close on the heals of the LEGO sniper rifle. This is a great summer project if you don’t mind letting the kids use the quick connect on your air compressor. It’s really just a ‘T’ made of PVC with two valves for air and water management and a soda bottle on the third leg as a reservoir. In the short clip after the break you can see that you don’t get a lot of shooting time out of each charge compared to the DIY Super Soaker, but this build is also a lot less complicated.

Continue reading “Pressurized PVC Water Gun” →

Seven-six-two Millimeter. Full Plastic Jacket.

June 11, 2010 by Mike Szczys 31 Comments

Minifigs beware, something’s afoot. This LEGO sniper rifle is in talented hands to clean up those problem areas. [Jack Streat] put together this fascinating build as well as the delightful demo after the break. The bolt pulls a 1×4 block out of the eight-round magazine and loads it into the chamber. A pull of the trigger flings it with surprising accuracy. Want to be the coolest parent ever? Forgo the store-bought toys this year and put one of these together for your kid. Just don’t turn them into Private Pyle (NSFW).

Continue reading “Seven-six-two Millimeter. Full Plastic Jacket.” →

LEGO Printer Built Without NXT parts

June 2, 2010 by Mike Szczys 28 Comments

[youtube=http://www.youtube.com/watch?v=zX09WnGU6ZY]

[Squirrelfantasy] built a printer using LEGO pieces. It’s not a Mindstorm project but instead depends on some type of development board and some auxiliary components on a protoboard. We couldn’t get a good enough look to tell exactly what makes up the electronics so start the debate in the comments. We feel this is a printer and not a plotter because the stylus moves on just one plane while the paper feeds past it but that’s open for debate as well.

Guess this answers the question of why aren’t we building our own printers? Some folks are.

[Thanks Haxorflex and many others, via DVICE]

RC Car Taunts Man’s Best Friend

June 2, 2010 by Mike Szczys 18 Comments

[Arkos] gutted an RC car from his childhood and made it into a dog-taunting remote platform. An Arduino replaces the original circuitry with a Bluetooth module for connectivity. He uses an Xbox 360 controller and has added a small speaker to act as a siren. But for our money it’s the camera that makes this hack. It streams video back to a laptop and because it’s mounted on a couple of servos the left stick controls where the lens is looking. The next evolution should replace the Arduino for a standalone microcontroller but what he’s come up with as a first prototype is delightful. See Fido run in terror after the break.

Continue reading “RC Car Taunts Man’s Best Friend” →

Hoverboard Comes To Life

May 29, 2010 by Caleb Kraft 57 Comments

[vimeo=http://vimeo.com/11968215]

This installation by artist [Nils Goudagnin] is a recreation of the hoverboard from Back to the Future II. We would like to see inside that plinth. We’ve seen levitating magnets before, but this is particularly stable. He says he is using lasers and a control system of some kind to stabilize it. Just to guess, we’d say that the lasers determine the distance of the board and an array of electromagnets below is adjusted to keep it level. Then again, we might be over thinking this. Even though it can’t be ridden, we’d love to have one around the office just to look at.