lego

339 Articles

Hackaday Links: January 5, 2012

January 5, 2012 by 23 Comments

Now make it life size

Here’s a scale model of the classic Playstation game Wipeout. It uses quantum levitation, superconductors, liquid nitrogen, and incredibly detailed models of the cars in Wipeout. They’re able control the speed and direction of the cars electronically. Somebody get on making one of these I can drive. Never mind, it’s totally fake, but here’s a choo-choo that does the same thing. Thanks for the link, [Ben].

Found a use for eight copies of Deep Impact

Where do you keep all your wire? [Paul] keeps his inside VHS tapes. It’s one of the most efficient ways of storing wire we’ve seen, just don’t touch those VHS copies of the original Star Wars trilogy.

There’s MAME machines for pinball?

MAME arcade machines are old hat, but we’ve never seen something to emulate pinball. The build uses two LCD monitors, a small computer and PinMAME. There’s videos in the build log; tell us if we’re stupid for wanting to build one. Thanks go to [Adrian] for sending this one in.

LEGO binary to decimal conversion

[Carl] is doing a few experiments to see if it’s possible to build a calculating machine out of LEGO. He managed to convert four bits of binary into decimal. We’ve seen a LEGO Antikythera mechanism but nothing on the order of an Analytical Engine or some Diamond Age rod logic. Keep it up, [Carl].

Lubs and Dubs that aren’t for dubstep

The folks at Toymaker Television posted a neat demo of heart rhythms emulated with a microprocessor. It cycles through normal sinus rhythm, atrial fibrillation, atrial flutter, and everything else that can go wrong with your heart. We know some nurses that would have loved this in school.

IP Over LEGO Train Carrier

December 26, 2011 by 16 Comments

[Maximilien] sent in a networking protocol built out of a LEGO train set. Unlike IP over Avian Carrier this system won’t be killed by plate-glass windows or birds of prey, but we’d hate to step on [Max]’s work in bare feet.

The system uses a USB flash drive to carry data around to different nodes. At each node, [Max] removed the power from the tracks and added a relay to start the train up again. A mechanical switch detects the presence of the train, and an Arduino makes the link to the Linux boxes via serial-over-USB.

The physical connection of the flash drive is with four wires and aluminum foil contacts. To send data, the system waits for the train to arrive at the ‘station’, mounts the drive, checks if there is data for it, and sends what needs to be sent. After unmounting the drive, power is applied to the local rail and the train continues on its journey.

[Max] admits that the latency on his network is terrible, but the bandwidth should be fairly good. As the old saying goes, ‘Never underestimate the bandwidth of a station wagon full of tapes.’ We’re not quite sure how that applies to LEGO trains, but there you go. Check out the gallery of [Max]’s work after the break.

Continue reading “IP Over LEGO Train Carrier” →

Retrofitting Modern LEGO Train Tracks For Use With Older Version

December 19, 2011 by 28 Comments

So you’re really looking for that [Norman Rockwell] Christmas and want to set up your train to encircle the Christmas tree this year. The problem is that all you’ve got is an old LEGO train set and not enough track for it. You can’t just buy some more, because the technology has changed; or can you?

[Chris] was dismayed to find that newer LEGO train sets have gone to battery operation rather than drawing power through metal tracks. The new tracks are plastic, and buying extra segments of the older version is cost prohibitive. He figured out a way to add power conductors to the new track pieces.

It turns out the design of the new tracks matches the old, except they’re all in plastic instead of having metal rails. He bought a plastic add-on set, then picked up some copper foil from the hobby store which is meant for stained-glass work. It’s adhesive backed, and after working out the best way to apply it, he coated the rails with the stuff. As you can see above, the new mates perfectly with the old, and keeps that locomotive chugging along.

If you’ve got copper foil left over after this hack, there’s tons of other uses for it. Perhaps building your own flex sensors is worth a try.

Hackaday Links: December 3, 2011

December 3, 2011 by 35 Comments

Honey, would you like some cheese? WHIRRRRRRRRR

[The Timmy] broke his manual cheese grater. It would be a waste to throw away a perfectly functional tool that’s only missing a handle, so he kicked it up a notch with a cordless drill. Now [Tim], “can grate with incredible speed and power for even the toughest of cheeses.” Anyone have a broken pepper mill?

The most adorable oscilloscope

We’re not much for plugging products, but this scope is really cool. It’s designed to fit on a breadboard and is smaller than some ICs we’ve seen (68000, so yes, it is). We’re wondering why there hasn’t been a homebrew version of this yet.

Now do an R/C castle

Here’s a minifig-sized R/C LEGO car made by [brickmodder]. It has a custom drive train and steering mechanism that uses the smallest servos [brickmodder] could find. How about an R/C pirate ship next?

It’s probably an ad for something

Here’s some sort of code thing that asks the question, “Can you crack it?” Apparently, it’s for UK cryptanalyst recruiting. You won’t get a 00-designation, but woo Bletchley Park.

Inverting an inverter

[Manfred] is putting an alternative energy setup on his land. Of course he needed an inverter to charge his batteries, so he went with a highly regarded (high price) box. What he got was anything but. You’re going to need at least ten minutes to go through this hilariously sad teardown of a high quality Taiwanese inverter. Oh, [Manfred] is awesome. Just look at his microhydro plant.

Hackaday Links: November 24, 2011

November 24, 2011 by 9 Comments

Finally an Arduino shield that does nothing

The folks at Evil Mad Scientist labs have finally created the Googly Eye Shield for Arduinos. With it’s pass-through .100 headers, it adds googly eyes to your Arduino projects. Of course, instead of in addition to the googly eyes you could add a breadboard, making it somewhat useful. A million fake internet points goes to the first person to implement Xeyes on this thing.

Phat beats from kids toys

[Ville] couldn’t afford an Akai MPC for laying down some beats. Wanting a real tactile interface, he hacked this kid’s toy. It’s just an RCA cable attached to the tiny chip inside the toy. The new line out goes to his mixers where he does some pretty impressive stuff.

Mona Lisa is Vigo the Carpathian

What did we just say about real-life Xeyes? [Geert] just made a print of the Mona Lisa follow you around the room with her eyes (Dutch, translation). The build is a pair of servos and a DIY motion capture app running on a laptop. Now we need to find a print of Vigo…

Quantifying heat sink efficiencies

[Mike] is an experimenter at heart. He was wondering about the efficiency of small, clip-on heat sinks versus the ones we use to defrost frozen food. The results are exactly as you would expect, but he did find something interesting – his experimental technique didn’t find much of a difference between thermal paste/grease/pads and no thermally conductive material.

Mini-fig sized R/C LEGO car

The guys at Brickmodder.net took a car from a LEGO set and made it remote control. The drive train and steering both use servos controlled by the smallest 3-channel receiver they could find.

Bomb Disposal Robot With Lego Gripper

November 3, 2011 by 4 Comments

[Krash] had a lot of fun hacking up his Spy Gear TRAKR; we’re just lucky he was able to move a suspicious Shrek doll before it detonated.

The now discontinued Spy Gear TRAKR serves as the basis for [Krash]’s build. This tiny remote-controlled toy transmits video back to its remote and makes us very jealous of the awesome toys our nephew has. Thankfully, the engineers behind the TRAKR made it extremely hackable, as proved by Hack A Day’s very own [Phil Burgess].

[Krash] began his build by putting a few male headers in the GPIO pins on the TRAKR’s board. After that, the TRAKR SDK was downloaded. He used a few Snap Circuits to verify his TRAKR software was working, then set off to build a Lego gripper arm. The arm is powered through an H-bridge IC [Krash] found alongside the rest of his Snap Circuits stuff.

Not a bad build for what amounts to a pile of toys. Check out [Krash]’s video of his bomb disposal bot after the break.

Continue reading “Bomb Disposal Robot With Lego Gripper” →

Time Twister Is An Ingenious Lego Clock

November 2, 2011 by 33 Comments

Here’s an interesting take on a Lego clock, it uses rotating squares to change the orientation of the black and white tiles to display the needed number. As we see one of the digits cycling to the next number in the video after the break, a couple of different things pop into mind. This seems very much like a 1-dimensional Rubik’s Cube, and it also has a hint of a very large ePaper display. Those use magnetic fields to swivel microspheres that are black on one side and white on the other.

The timepiece, which was built by [Hans Andersson], is limited to displaying numbers only. If you think about it, each row is three pixels but you don’t need to have every combination of those pixels available in order to display the digits. Four sides provide enough room for the necessary combinations. This would not be true if you were trying to scale it up to include all alpha-numeric characters.

The tick of this thing certainly sounds interesting, huh?

Continue reading “Time Twister Is An Ingenious Lego Clock” →