Make A Mac On The Cheap

December 3, 2009 by Jakob Griffith 25 Comments

We’re not usually the type for PC case mods, but when we received the tip for the Macbook Mod of hiding a Macbook inside of two Linksys routers, we decided to make an exception on three accounts. [Tyler’s] original intent was acquiring a Mac, the total price for a full functioning system was a little over $200, and Macs aren’t PCs.

[Thanks Bluewraith]

But what if you want the mac experience and not the nitty gritty hassle of fixing logic boards, searching for long lost components, and modding a case? Then buy a Mac you might like [Useless Ninjas’] super cheap modification of an MSI Wind into Leopard running brute for only $240.

[Thanks Flyordie2]

Xbox-intosh & An Atom-based Cube

November 29, 2009 by Jake W 31 Comments

Though [Will] is more of a PC guy, he needed a Mac to run the software he needed for his line of work (Final Cut). Making the best of an unfortunate situation, he constructed this hackintosh inside the case of Microsoft’s original gaming console – the Xbox. [Will] did a good job at documenting the build.

[Paul], who seems a bit more fond of Apple’s technology, still felt as though his hardware could use an overhaul. So he gutted his G4 Cube and dropped in an Intel Atom 330 based system to get his ultimate HTPC. To make controlling the 1 TB beast more fun, he hooked up a Wiimote through DarwiinRemote.

Mac Mini – Getting A Little More Useful

November 4, 2009 by Jakob Griffith 25 Comments

We’re pretty sure Apple decided to implement an IR sensor in their Mac Mini line simply to mock the user. For those who are unaware, the built in sensor only works with the standard Apple Remote; unless you happen to have a programmable PDA or similar you’re SOL. An alternative solution would be to install a USB IR receiver. But then your beautiful Mac Mini is forced to sit alongside an ugly black box. Why not have the best of both worlds? [SqueeZe] wrote an (almost) entirely non invasive tutorial for placing a USB IR receiver inside his Mac Mini. Reminds us of a certain hack a while back, but the objective was to get the IR receiver outside of the unit rather than inside. Different people, different worlds.

[Thanks Kiran]

Magic Mouse And MacBook Teardowns

October 22, 2009 by Phil Burgess 17 Comments

magicmouse

The folks at iFixit must hold some kind of record for fastest-voided warranty. It’s been less than 48 hours since Apple unleashed a torrent of new computers and peripherals, and they’ve already set upon the new wares like a pack of ravenous, spudger-wielding Velociraptors, photoblogging the splayed entrails for our edutainment.

The refreshed MacBook holds few surprises, resembling a Star Trek teleportation mix-up between the prior 13″ white MacBook and the current 13″ MacBook Pro. It retains a white polycarbonate case much like its predecessor while adopting a subset of the Pro’s components — CPU and GPU, glass trackpad, Mini DisplayPort, and the long-lived but sealed battery. Internally the system is still a maze of different-sized Torx, Phillips and tri-wing screws, but they do report this latest revision to be easier to dismantle for repair.

More novel inside and out is the new Magic Mouse, which early reports suggest may finally redeem Apple’s eleven year train wreck of mice. There’s not much to see on the bottom half — it’s a typical wireless mouse consisting of batteries, laser tracker and a Bluetooth chip. The top is something to behold though, with nearly the entire surface encrusted in capacitive sensors capable of gestural input. It resembles a miniature version of this electrostatic interface we saw in April.

No teardowns of the new iMacs, Mac mini or Time Capsule have taken place yet, but it’s surely just a matter of time. Even Velociraptors need to eat and sleep.

Update: 27″ iMac teardown added. Rawr!

Second Hard Drive In A Macbook Pro

August 23, 2009 by Caleb Kraft 23 Comments

Picture 4 (Custom)

[Reid] wrote in to show us how to add a second hard drive to his Macbook Pro. He found that he hardly ever used his DVD drive, so sacrificed it in favor of added storage. What he found was that it had a proprietary adapter that he was unable to find for sale anywhere. Making an adapter may seem like a pretty simple hack, but this could save some people considerable time. Its also worth noting that upgrading the firmware got him an 18% speed increase, so don’t ignore those updates. We don’t see too many mac hacks around here, you may recall the mac tablet hacks and the logo monitor.

Building An Apple 1

August 14, 2009 by Caleb Kraft 22 Comments

replica1 (Custom)

With all the recent talk of hackintoshes going around, we thought we should post this oldie. It is a writeup on how to build your own Apple 1 called Replica 1. If you’ve got the $149 laying around and think you can handle the construction of a mere 88 components, you can make one yourself. Not only can you order kits or complete units, they even have a download page with applications and games. It might be fun to have one of these sitting on the desk right next to our minimac. If you really don’t want to buy one, but maybe want to just play a little bit, there’s always virtual apple.

[via DVICE]

TUIO Multitouch On IPhone Via Browser Hack

April 22, 2009 by Caleb Kraft 11 Comments

[vimeo=3975324]

When the MSAFluids Remote multitouch App was rejected, a developer found a way to get virtually the same effect using a safari App. They’re using the TUIO protocol to get the desired remote control. This opens up the door to extending Applications through the browser as well. While this probably wouldn’t allow you to utilize the other sensor inputs from your device, like accelerometer data, it will allow for fast prototyping of applications that don’t need that.