Before Arduino There Was Basic Stamp: A Classic Teardown

August 27, 2015 by Brian Benchoff 122 Comments

Microcontrollers existed before the Arduino, and a device that anyone could program and blink an LED existed before the first Maker Faire. This might come as a surprise to some, but for others PICs and 68HC11s will remain as the first popular microcontrollers, found in everything from toys to microwave ovens.

Arduino can’t even claim its prominence as the first user-friendly microcontroller development board. This title goes to the humble Basic Stamp, a four-component board that was introduced in the early 1990s. I recently managed to get my hands on an original Basic Stamp kit. This is the teardown and introduction to the first user friendly microcontroller development boards. Consider it a walk down memory lane, showing us how far the hobbyist electronics market has come in the past twenty year, and also an insight in how far we have left to go.

Continue reading “Before Arduino There Was Basic Stamp: A Classic Teardown” →

$50 Multimeter Comparison And Teardown

August 11, 2015 by Al Williams 45 Comments

We remember when buying even a modest digital multimeter was a big investment. These days, you can find tool stores giving away cheap meters and if you are willing to spend even a little money, you can buy a meter with tons of features like capacitance, temperature, and other measurements.

Like most things, though, you can pay a little money for a bargain, or you can overpay for a dud. To help you pick, [TechnologyCatalyst] decided to do an extensive video review of 15 different meters in the under $50 price category.

If you are looking for a quick video to watch, you might want to move along. The review is in nine videos ranging from an introduction, to a comparison of build quality, discussion about the displays on each meter, and, of course, the measurement capability of each meter. There’s even a video that shows tear downs so you can see inside the instruments.

Continue reading “$50 Multimeter Comparison And Teardown” →

Police LiDAR Tear Down

July 20, 2015 by Al Williams 48 Comments

Most police departments made a big switch from RADAR to LiDAR after consumers starting buying RADAR detectors. A lot of those LiDAR units are now out there on the surplus market. If you don’t have $500 or so to buy a LiDAR gun just to see what makes it tick, you are in luck. [Alexei Polkhanov] spent an hour tearing down a UltraLyte LTI 20-20 LR 100 so you don’t have to.

An hour seems like a lot for a tear down video, but [Alexei] speeds up through the boring parts, and spends a lot of time talking about the optics and how the device works (with a lot of hand drawn diagrams). He also puts it back together and connects a scope to show the electronic operation of the device.

He mentions the display and control board uses a serial interface to talk to the controller board. There is also an unpopulated header on the main board that is clearly a serial port, probably for reprogramming the onboard microcontroller. With a little reverse engineering work, this LiDAR gun ought to be highly hackable.

In addition to the display and control board, the unit contains a high voltage supply for the laser and the photodiode. Making a power supply to drive the laser that is clean enough not to disturb the sensor is one of the design drivers and it shows. The power supply is a large and complex board by comparison to the other boards in the system.

Continue reading “Police LiDAR Tear Down” →

Hackaday Links: July 19, 2015

July 19, 2015 by Brian Benchoff 7 Comments

Everybody needs an external USB drive at some time or another. If you’re looking for something with the nerd cred you so desperately need, build a 5 1/4″ half height external drive. That’s a mod to an old Quantum Bigfoot drive, and also serves as a pretty good teardown video for this piece of old tech.

The Woxun KG-UV2D and KG-UV3D are pretty good radios, but a lot of amateur radio operators have found these little handheld radios eventually wear out. The faulty part is always a 24C64 Flash chip, and [Shane] is here to show you the repair.

Last year there was a hackathon to build a breast pump that doesn’t suck in both the literal and figurative sense. The winner of the hackathon created a compression-based pump that is completely different from the traditional suction-based mechanism. Now they’re ready for clinical trials, and that means money. A lot of money. For that, they’re turning to Kickstarter.

What you really need is head mounted controls for Battlefield 4. According to [outgoingbot] it’s a hacked Dualshock 4 controller taped to a bike helmet. The helmet-mounted controller has a few leads going to another Dualshock 4 controller with analog sticks. This video starts off by showing the setup.

[Jan] built a modeling MIDI synth around a tiny 8-pin ARM microcontroller. Despite the low part count, it sounds pretty good. Now he’s turned his attention to the Arduino. This is a much harder programming problem, but it’s still possible to build a good synth with no DAC or PWM.

Muse EEG Headset Teardown

July 15, 2015 by James Hobson 24 Comments

[Lady Ada] over at Adafruit just did a delightful tear down of the Muse EEG headset.

The Muse headset is a rather expensive consumer-grade EEG headset that promises better meditation with the ability to track your brainwaves in order to go into a deeper trance. We’re not much for meditating here at Hackaday, but the EEG sensors really do work. It’s pretty cool to see the insides of this without forking out $300 ourselves for one we might break.

Like most EEG headsets, they weren’t really designed to be worn while sleeping. Two bulky pods over the ears hold the battery and charging circuit on one side, and the brains on the other. The neat part about it is a little adjustable metal piece which allows for adjustment on the strap while maintaining all the electrical connections. A flexible circuit houses forehead electrodes which go along the length of the band.

In the past we’ve seen work done on the Lucid Scribe project, using a modified Neurosky Mindwave EEG (at $99 it’s much cheaper to hack). The idea is to be able to monitor your sleep cycles accordingly, and then give audible cues to the dreamer in order to “wake up” inside the dream. Think of the Inception music.

Unfortunately it doesn’t look like the Muse will be any better for lucid dreaming. If you were able to decouple the electrodes from the rest of the headset, then it might just work.

Continue reading “Muse EEG Headset Teardown” →

Hackaday Links: Summer, 2015

June 21, 2015 by Brian Benchoff 26 Comments

[Elia] was experimenting with LNAs and RTL-SDR dongles. If you’re receiving very weak signals with one of these software defined radio dongles, you generally need an LNA to boost the signal. You can power an LNA though one of these dongles. You’ll need to remove a few diodes, and that means no ESD protection, and you might push the current consumption above the 500mA a USB port provides. It does, however, work.

We’ve seen people open up ICs with nitric acid, and look inside them with x-rays. How about a simpler approach? [steelcityelectronics] opened up a big power transistor with nothing but a file. The die is actually very small – just 1.8×1.8mm, and the emitter bond wire doesn’t even look like it’ll handle 10A.

Gigantic Connect Four. That’s what the Lansing Makers Network built for a Ann Arbor Maker Faire this year. It’s your standard Connect Four game, scaled up to eight feet tall and eight feet wide. The disks are foam insulation with magnets; an extension rod (with a magnet at the end) allows anyone to push the disks down the slots.

[Richard Sloan] of esp8266.com fame has a buddy running a Kickstarter right now. It’s a lanyard with a phone charger cable inside.

~~Facebook is well-known for the scientific literacy of its members.~~ Here’s a perpetual motion machine. Comment gold here, people.

Here’s some Hackaday Prize business: We’re giving away stuff to people who use Atmel, Freescale, Microchip, and TI parts in their projects. This means we need to know you’re using these parts in your projects. Here’s how you let us know. Also, participate in the community voting rounds. Here are the video instructions on how to do that.

Tearing Down The Apple Watch

May 20, 2015 by Brian Benchoff 38 Comments

The Apple Watch has been out for nearly a month now, but so far we haven’t seen a good look at the guts of this little metal bauble of electronic jewelry. Lucky for us that a company in China is hard at work poking around inside the Apple Watch and putting up a few incredible SEM images along the way (Google Translatrix).

This isn’t the first Apple Watch teardown that’s hit the intertubes – iFixit tore one apart with spudgers and tiny screwdrivers and found someone skilled in the ways of tiny parts could probably replace the battery in this watch. Shocking for an Apple product, really. iFixit also took a look at the watch with an x-ray, revealing a little bit of the high-level design of the Apple Watch, the Apple S1 computer on a chip, and how all the sensors inside this wearable work.

This teardown uses an incredible amount of very high-tech equipment to peer inside the Apple Watch. Because of this, it’s probably one of the best examples of showing how these tiny sensors actually work. With some very cool images, a 6-DOF IMU is revealed and the Knowles MEMS microphone is shown to be a relatively simple, if very small part.

Now the Apple S1, the tiny 26.15mm x 28.50mm computer on a chip, serves as the brains of the Apple Watch. It’s breathtakingly thin, only 1.16mm, but still handles all the processing in the device.

Even if you won’t be buying this electronic accessory, you’ve got to respect the amazing amount of engineering that went into this tiny metal bauble of semiconductors and sensors.