Month: October 2009

Halloween Props: Alien Costume

October 26, 2009 by 13 Comments

alien

[creatrope] sent in this slick Alien costume that he made for his son. The costume does look decent, but not professional. For something tossed together from parts around the house, it looks fantastic. The real kicker, is the fact that it has the retractable inner mouth. The retractable mechanism is constructed from Legos and extends when his son opens the mouth. We think he did a fantastic job with this costume, but if you’re looking for something a little more polished, check out this Alien made by [Asy0uw1sh ] you can see a little more detail on how it works here.

Extended IR Input

October 25, 2009 by 18 Comments

4041865272_d18d60a6b0

We’re not sure why [Roteno] prefers to have his TV and cable boxes not face him when he’s sitting on the couch, but to each their own. You may already see many problems with this setup: discoloration from LCD viewing angle, difficulty playing Wii, oh and most importantly – not being able to change the channel with his IR remote. [Roteno] was lucky enough, however, to have an IR remote input on the back of his cable box. All it took was a 3.5mm jack and a spare IR receiver and he was back in business. Sure it’s not as technical as some of our cable or IR hacks and we would like to see someone try this who doesn’t have as easily accessible IR input on the back of their cable box. But either way, here’s one more step to never having to leave that couch.

DIY Plotter With Laser

October 25, 2009 by 39 Comments

plotter-with-300w-laser

[Viacheslav] built a plotter that is fast and accurate. He wanted to take it one step further and added a laser in place of the pen. The 300 mW unit does a nice job of wood-burning any pattern sent to it, but isn’t strong enough to serve as a laser cutter for anything other than thin-film. We wonder if it can be used to cut solder paste stencils for surface mount PCB production.

In the video after the break you can see some plotting that uses a pen. In addition to writing on paper, [Viacheslav] has tested this as a method of applying etch resist to a copper clad board for PCB production. He’s able to achieve 0.8 mm pitch but the production process is limited by the resist pen’s tendency to wear out quickly and to only prevent etching for a short period of time (compared to toner transfer resist).

Just like with his touch sensitive keypad project, he’s taken the time to thoroughly document his work. Build notes, pictures, CAD files, and source code are all available for your perusal and hackage.

Continue reading “DIY Plotter With Laser” →

Double Sided Surface Mount PCB Population

October 25, 2009 by 20 Comments

[youtube=http://www.youtube.com/watch?v=6M3MeADb1dE]

Above is a video detailing one method for populating a two sided surface mount PCB. We covered using a stencil to apply solder paste for a PCB a few weeks ago. In the comments there was a debate about the virtue of using stencils as well as a question about how two sided boards are populated. This was a good question because reflowing a board twice can cause components on the underside to fall off.

[Wim L’s] comment mentions that there are a couple of methods for two sided population. In the video you will see that a stencil is not being used, but instead, paste is applied by a pedal actuated syringe. The paste is applied to the underside of the board first, then a teeny dot of epoxy is added to hold the component in place. Each part is then positioned normally and baked in a reflow oven. This process both reflows the solder, and cures the epoxy. When the board is reflowed a second time, the epoxy holds the bottom components in place as the top solder reaches its melting point.

This method of applying solder paste is slower than using a stencil. But if done correctly, every component can get the amount of solder needed.

Halloween Props: Pie Of Sauron

October 25, 2009 by 12 Comments

pie-of-sauron

[Richard] combined creative carving with vacuum tube electronics for a unique pumpkin offering. He used the stencil-and-cut method of carving, making use of an inexpensive carving kit for great results. He salvaged an LED module from a flashlight to provide the internal illumination, but it’s the center feature that we like the best. [Richard’s] used a glow-transfer counting tube, or dekatron, which provides something like a circular cylon eye to the project. There’s a video of this after the break.

You might not have access to a wicked-looking dekatron but we’re guessing you’ve got a microcontroller and some LEDs lying around that can serve as a stand-in for one night. We’d love to do a reader jack-o-lantern roundup, so if you build something, send us a picture!

Continue reading “Halloween Props: Pie Of Sauron” →

Use IPhone To Run Yourself Over

October 24, 2009 by 39 Comments

run-yourself-down-with-iphone

The Spirit of Berlin team has developed an iPhone app to remotely control a minivan. They didn’t have to do much to the vehicle to get this working because the platform was  developed for the 2007 Darpa Urban Challenge. The iPhone connects with the driving circuitry via WiFi and offers a gas button, a brake button, and a steering button to enable the accelerometer for turning. The front camera video is transmitted to the iPhone in real-time.

In the picture above you can see the operator in the center of the van’s camera view. It looks like the van’s top speed is limited, but remembering our own ineptitude in piloting RC vehicles, we hope this doesn’t result in a Darwin Award. We’ve embedded a video after the break. Everyone loves to see some Mario Kart reeneactment. You can catch some around 2:28 into the video. Enjoy.

Continue reading “Use IPhone To Run Yourself Over” →

Desktop Decepticon Repurposes Cell Phone

October 24, 2009 by 20 Comments

cell-phone-decipticon

We’ve got a few old cell phones sitting around and apart from salvaging the LCD screen we’re not quite sure what to do with them. [Gingerpete50] turned his into a desktop Decepticon figurine. This masterpiece is a delightful conversation piece and when he’s tired of it decorating his cubicle, we’re sure there will be plenty of people he can hand it down to. The figure doesn’t transform back into a cell phone and it uses a few extra parts he had on hand, but neither of these things bother us. What it does have is some articulated joints and a few LEDs that you can see above. We haven’t tried our hand at custom model building, but after seeing this you can be assured it’s on our list.