Get Ready For The Great Eclipse Of 2017

January 12, 2017 by Dan Maloney 62 Comments

On August 21, 2017, the moon will cast its shadow across most of North America, with a narrow path of totality tracing from Oregon to South Carolina. Tens of millions of people will have a chance to see something that the continental US hasn’t seen in ages — a total eclipse of the sun. Will you be ready?

The last time a total solar eclipse visited a significantly populated section of the US was in March of 1970. I remember it well as a four-year-old standing on the sidewalk in front of my house, all worked up about space already in those heady days of the Apollo program, gazing through smoked glass as the moon blotted out the sun for a few minutes. Just watching it was exhilarating, and being able to see it again and capitalize on a lifetime of geekiness to heighten the experience, and to be able to share it with my wife and kids, is exciting beyond words. But I’ve only got eight months to lay my plans! Continue reading “Get Ready For The Great Eclipse Of 2017” →

Bring Your Palm VII To ShmooCon This Weekend

January 12, 2017 by Brian Benchoff 29 Comments

We’re not even halfway through January, and already the conference season is upon us. This weekend, Hackaday will be attending Shmoocon at the Hilton in Washington, DC. I’ll be there getting the full report on Russian hackers, reverse engineering, and what the beltway looks like with an ice storm during morning rush hour.

What’s in store for Shmoocon attendees? The schedule looks really cool with talks on something like inline assembly in Python, tools for RF reverse engineering, manufacturing and selling a U2F token, emulating ARM firmware, and so much more. Want to attend Shmoocon? Too bad! Tickets sold out in less than 10 seconds, and we’re totally not going to talk about the BOTS Act at all. If you’re clever you can still pick up a barcode on Craigslist for $300-400, but I wouldn’t recommend that.

As we did last year, Hackaday is going to have a lobbycon with Dunkin Saturday morning at 08:30, although which lobby is still up in the air. Check out the Hackaday Twitter for a few real-time updates. This is a bring-a-hack event, and I’ll be showing off how to add 18dBi of gain to a standard ESP8266 module. Show off what you’re working on and get a donut.

Portable RetroPie Builds On The Shoulders Of Giants

January 12, 2017 by Bryan Cockfield 36 Comments

For anyone wanting to get that shot of nostalgia without the hassle of finding an NES Classic, the Retropie project is a great starting point. Of course, it’s not too noteworthy to grab a Raspberry Pi, throw a pre-built distribution on it, and plug in an SNES to USB converter. What is noteworthy, however, is building a Retropie that’s portable and that has the quality and polish of the latest build from [fancymenofcornwood].

For starters, the laser cut wood case was custom-made. From there, all of the PCBs were fitted including specific ones to handle each set of buttons (complete sets of D-pads, shoulder buttons, and joysticks) and another for the 5″ HDMI screen. It has stereo speakers and its own headphone jack (to the envy of all new iPhone owners), and is powered from a Raspberry Pi 2 running Retropie 4.1. The battery pack shouldn’t leave you stranded, either, especially not if you grew up playing the Sega Game Gear.

The quality of the build here is outstanding, and its creator made a design choice to make it easily replicable, so if you’ve wanted to play N64 or PS1 games while on the go, this might be what you’ve been waiting for. There are lots of other options for getting some fun from a Retropie going though, from building one into a coffee table to re-purposing that infamous Game Gear.

Obligatory clip of this portable playing Doom is found after the break.

Continue reading “Portable RetroPie Builds On The Shoulders Of Giants” →

Old Motor Donates Rotor For Coaxial Wind Vane And Anemometer

January 12, 2017 by Dan Maloney 9 Comments

Problem: build a combined anemometer and wind vane where the pivots for both sensors are coaxial. Solution: turn an old universal motor into a step-wise potentiometer for the wind vane, and then pull a few tricks to get the whole thing assembled.

We have to admit that when we first saw [Ajoy Raman]’s Instructables post, we figured that he used a universal motor to generate a voltage from the anemometer. But [Ajoy]’s solution to the coaxial shafts problem is far more interesting than that. A discarded universal motor donated its rotor and bearings. The windings were stripped off the assembly leaving nothing but the commutator. 1kΩ SMD resistors were soldered across adjacent commutator sections to form a series resistance of 22kΩ with taps every 1k, allowing 0 to 2.2V to be read to the ADC of a microcontroller depending on the angle of the vane.

As clever as that is, [Ajoy] still had to pull off the coaxial part, which he did by drilling out the old motor shaft from one end to the other using just a drill press. The anemometer shaft passes through the hole in the shaft and turns a small DC motor to sense wind speed.

There might have been other ways to accomplish this, but given the constraints and the low cost of this solution, our hats are off to [Ajoy]. We’re a little concerned with that motor used for the anemometer, though. It could result in drag when used as a generator. Maybe a better solution would be a Hall-effect sensor to count rotations of a hard drive rotor.

Continue reading “Old Motor Donates Rotor For Coaxial Wind Vane And Anemometer” →