Make Your Own Play Station (The Space Is Important)

January 8, 2024 by Jenny List 20 Comments

The early history of the Sony Playstation lies in a stillborn collaboration between Nintendo and Sony to produce an SNES with a CD-ROM drive. So the story goes, Nintendo’s Philips deal angered Sony, who decided to make their own console line, and the rest is history. A very small number of prototypes were made, badged as “Play Station,” and should you find one that escaped today, you’re sitting on a fortune. [James] doesn’t have one, but he did have half a Playstation and an SNES shell, so he could make an ungodly child of the two consoles that you can see in the video below the break.

Those Playstation CD-ROM drives were notorious for melting back in the day, so it’s no surprise they’re still for sale today. Thus, he was able to bring the Sony back to life. What follows is an episode of console cutting worthy of a slasher horror movie, as instead of a bit of fine Dremmeling, he brings out an angle grinder and slices away with abandon. We don’t like the Nintendo switch carrying mains voltage, but we’re fine with the PlayStation expansion connector going away. The Nintendo eject button needs a hack to operate the Playstation door open button when pressed. It’s cool to see the board has a mod chip. We used to fit those as a sideline in a previous life. Continue reading “Make Your Own Play Station (The Space Is Important)” →

Half Power Bank, Half Spot Welder

January 8, 2024 by Jenny List 13 Comments

There was a time when every gizmo on AliExpress also had a big white LED so it could also work as a flashlight, but maybe the power bank is the new flashlight. [Aaron Christophel] has a battery spot welder that costs a not unreasonable 30 euros and can also be used as a novelty power bank. He subjects it to a test and teardown in the video below the break.

First of all, he conducts a few weld tests, and we have to say it seems capable of some reasonable results if its parameters are correctly adjusted. Then the end comes off the extruded aluminium case, and the guts of the device are slid out for a teardown.

The power comes from a pair of Li-Po pouch cells, while on the board, there’s an STM32 clone providing the timing for a set of MOSFETs that do the heavy lifting. There’s a colour display for tweaking the settings. Alongside all this, there’s also a small chip for that power bank functionality. Charging is via USB-C, though, of course, it’s not really proper USB-C but a USB-C socket that expects 5 volts. This is a disappointing trend in cheap electronics that sullys the promise of USB-C.

It seems this spot welder is capable of doing the job, which is pleasing after our previous disappointing look at battery welders.

Continue reading “Half Power Bank, Half Spot Welder” →

The World Of Web Browsers Is In A Bad Way

January 4, 2024 by Jenny List 115 Comments

There once was a man who invented a means for publishing scientific documents using hypertext. He made his first documents available from his NeXT cube, and a lot of the academics who saw them thought it was a great idea. They took the idea, expanded it, and added graphics, and pretty soon people who weren’t scientists wanted to use it too. It became the Next Big Thing, and technology companies new and old wanted a piece of the pie.

You all know the next chapter of this story. It’s the mid 1990s, and Microsoft, having been caught on the back foot after pursuing The Microsoft Network as a Compuserve and AOL competitor, did an about-turn and set out to conquer the Web. Their tool of choice was Microsoft Internet Explorer 3, which since it shipped with Windows 95 and every computer that mattered back then came with Windows 95, promptly entered a huge battle with Netscape’s Navigator browser. Web standards were in their infancy so the two browsers battled each other by manipulating the underlying technologies on which the Web relied. Microsoft used their “Embrace and extend” strategy to try to Redmondify everything, and Netscape got lost in the wilderness with Netscape 4, a browser on which nightmarish quirks were the norm. By the millennium it was Internet Explorer that had won the battle, and though some of the more proprietary Microsoft web technologies had fallen by the wayside, we entered the new decade in a relative monoculture. Continue reading “The World Of Web Browsers Is In A Bad Way” →

Retrotechtacular: The Fell Locomotive

January 3, 2024 by Jenny List 20 Comments

If you were to visit a railway almost anywhere in the world, you would find that unless it was in some way running heritage trains, the locomotives would bear a similarity to each other. Electric traction is the norm, whether it comes from a trackside supply or from a diesel generator. In the middle of the last century, as the industry moved away from steam traction though, this was far from a certainty. Without much in the way of power electronics, it was a challenge to reliably and efficiently control a large traction motor, so there were competing traction schemes using mechanical gearboxes or hydraulic drives. One of these is the subject of an archive film released by the oil company Shell, and it’s a fascinating journey into a technology that might have been.

A model of a gearbox, in black and white. — The Fell differential gearbox.

All diesel locomotive designs struggle with the problem of transmitting the huge torque required to start a fully loaded train at low speeds, and because of the huge force required, it’s impossible to design a locomotive-sized conventional gearbox to do the job in the way it might be managed on a truck. Electric and hydraulic drives exploit the beneficial torque characteristics of electric and hydraulic motors, but the mechanical gearbox isn’t quite done for. The subject of the video is British Rail number 10100, otherwise commonly known as the Fell locomotive, and it was a one-off prototype that took to the rails at the start of the 1950s designed to test a very novel gearbox design.

At the heart of the Fell gearbox is a set of differential gears the same as you’d find in the axle of a car, and in the locomotive they are used to combine the output of more than one engine. The loco had four smaller-than-normal diesel traction motors that could be combined, but even then, it wasn’t done. To achieve variable torque, they employed superchargers driven by a set of even-smaller diesel engines, resulting in an ungainly multi-engined beast but with the desired characteristics for both starting heavy trains and for moving them at high speed. Continue reading “Retrotechtacular: The Fell Locomotive” →

A Few Reasonable Rules For The Responsible Use Of New Technology

January 3, 2024 by Jenny List 96 Comments

If there’s one thing which probably unites all of Hackaday’s community, it’s a love of technology. We live to hear about the very latest developments before anyone else, and the chances are for a lot of them we’ll all have a pretty good idea how they work. But if there’s something which probably annoys a lot of us the most, it’s when we see a piece of new technology misused. A lot of us are open-source enthusiasts not because we’re averse to commercial profit, but because we’ve seen the effects of monopolistic practices distorting the market with their new technologies and making matters worse, not better. After all, if a new technology isn’t capable of making the world a better place in some way, what use is it?

It’s depressing then to watch the same cycle repeat itself over and over, to see new technologies used in the service of restrictive practices for short-term gain rather than to make better products. We probably all have examples of new high-tech products that are simply bad, that are new technology simply for the sake of marketing, and which ultimately deliver something worse than what came before, but with more bling. Perhaps the worst part is the powerlessness, watching gullible members of the public lapping up something shiny and new that you know to be flawed, and not being able to do anything about it.

Here at Hackaday though, perhaps there is something I can do about it. I don’t sit in any boardroom that matters but I do have here a soapbox on which to stand, and from it I can talk to you, people whose work takes you into many fascinating corners of the tech industry and elsewhere. If I think that new technologies are being used irresponsibly to create bad products, at least I can codify how that might be changed. So here are my four Rules For The Responsible Use Of New Technology, each with some examples. They should each be self-evident, and I hope you’ll agree with me. Continue reading “A Few Reasonable Rules For The Responsible Use Of New Technology” →

It’s Pronounced GIF

January 2, 2024 by Jenny List 197 Comments

As the holiday season is upon us and a Hackaday scribe sits protected from the incoming Atlantic storms in her snug eyrie, it’s time for her to consider the basics of her craft. Writing, spelling, and the English language; such matters as why Americans have different English spellings from Brits, but perhaps most important of them all for Hackaday readers; is it “gif”, or is is “jif”? This or the jokey sentence about spellings might be considered obvious clickbait, but instead they’re a handle to descend into the study of language. Just how do we decide the conventions of our language, and should we even care too much about them?

Don’t Believe Everything You Read in School

A picture of an American classroom in 1004 — Not everything you learn here is worth holding on to. Harrison Keely, CC BY 4.0.

We are sent to school to Learn Stuff. During that time we are deprived of our liberty as a succession of adults attempt year after year to cram our heads with facts. Some of it we find interesting and other parts not so much, but for the majority of it, we are discouraged from thinking for ourselves and are instead expected to learn by rote a set of fixed curricula.

Thus while writers have to discover for themselves that English is a constantly evolving language through which they can break free of these artificial bounds that school has imposed upon them, far too many people remain afraid to put their head above the linguistic parapet.

The result is that perceived deviations from the rules are jumped upon by those afraid to move with the language, and we even find our own linguistic Holy Wars to fight. The one mentioned above about “gif” versus “jif” is a great example, does it really matter that much whether you pronounce it with a hard “G” because that’s how most people say it, or as though it were a “J” because the creator of the file format said it that way? Not really, because English is an evolving language in the hands of those who speak it, not those of the people who write school books. Continue reading “It’s Pronounced GIF” →

Tube Design Tips To Save A Writer’s Project

December 30, 2023 by Jenny List 24 Comments

Most of the stories we cover here are fresh from the firehose, the newest and coolest stuff to interest you during your idle moments. Sometimes though, we come across a page that’s not new, but is interesting in its own right enough to bring to your attention. So it is with our subject here, because when faced with a tube circuit design problem, we found salvation in a page from [The Valve Wizard].

Do you need to apply negative feedback to a triode amplifier? The circuit is simplicity itself, but sadly when we were at university they had long ago stopped teaching the mathematics behind the component values. Step forward everything you need to know about triode amplifier negative feedback.

Negative feedback is a pretty simple idea: subtract a little of the amplifier’s output from the input. It reduces the amplifier’s gain with a flat response, so it’s useful for removing humps in the frequency response and reducing the tendency for distortion. In a single-ended triode amp it’s done with a resistor and capacitor from anode to grid, but the question is, just what resistor or capacitor?. Here the page has all the answers, taking the reader through calculating the desired gain, and picking the value of the capacitor to avoid affecting the frequency response. We wish that someone had taught us this three decades ago!

The website is full of really useful info about valve or tube amps, and it’s worth mentioning that he’s made it available in book format too. There’s no reason not to have a go at vacuum electronics. Meanwhile in case you are wondering what project prompted this, it was a quest to improve upon this cheap Chinese kit amplifier.