Bulked Up MHD Drive Makes Waves While Standing Still

December 1, 2023 by Tom Nardi 35 Comments

Looking back through the archives, we actually haven’t seen much in the way of homebrew magnetohydrodynamic drives (MHDs) — which is somewhat surprising, as the core concept isn’t nearly as complicated as its syllable-laden name might indicate. You can see results with little more than a magnet, a couple of electrodes, and a bench power supply. The trick is turning these base components into something that might actually have practical value.

That’s where we find [Jay Bowles], who has gone down a bit of a MHD rabbit hole these last few months. His latest MHD unit is a considerable improvement over its predecessor by all practical metrics, and as an added bonus, really nails the look of a futuristic propulsion unit. Even though the all-electric thruster hasn’t gone on a mission to anywhere more exotic than a table-top aquarium, you could easily imagine a pair of them slung under some top secret stealth watercraft.

Continue reading “Bulked Up MHD Drive Makes Waves While Standing Still” →

End Of An Era: Popular Science Shutters Magazine

November 30, 2023 by Tom Nardi 69 Comments

Just three years after the iconic magazine abandoned its print version and went all-digital, Popular Science is now halting its subscription service entirely. The brand itself will live on — their site will still run tech stories and news articles, and they have two podcasts that will keep getting new episodes — but no more quarterly releases. While you can’t complain too much about a 151 year run, it’s still sad to see what was once such an influential publication slowly become just another cog in the content mill.

Started as a monthly magazine all the way back in 1872, Popular Science offered a hopeful vision of what was over the horizon. It didn’t present a fanciful version of what the next 100 years would look like, but rather, tried to read the tea leaves of cutting edge technology to offer a glimpse of what the next decade or so might hold. Flip through a few issues from the 1950s and 60s, and you won’t see pulpy stories about humanity conquering the stars or building a time machine. Instead the editors got readers ready for a day when they’d drive cars with warbird-derived turbochargers, and enjoy more powerful tools once transistor technology allowed for widespread use of small brushless motors. It wasn’t just armchair engineering either, issues would often include articles written by the engineers and researchers that were on the front lines. Continue reading “End Of An Era: Popular Science Shutters Magazine” →

Hackaday Podcast 245: The Silver Swan, ET’s Umbrella Antenna, Model Tanks Vs Space Shuttle Tires

November 24, 2023 by Tom Nardi No comments

This week, Editor-in-Chief Elliot Williams and Managing Editor Tom Nardi link up through the magic of the Internet to go over some of their favorite stories from the last week. After revealing the bone-chilling winners of this year’s Halloween contest, the discussion switches over to old-timey automatons, receiving deep space transmissions with a homebrew antenna that would make E.T. proud, and the treasures that can be found while poking around in a modern car’s CAN bus.

They’ll also go over how NASA saved the taxpayers a bunch of money by hacking a remote controlled WWII tank, CNC controlled microscopes, and a cinema-quality camera you can probably build from what you’ve already got in the parts bin. Finally, they’ll detail an ambitious effort to recreate an old computer’s motherboard with a new feature in KiCad, and muse over all the interesting things that become possible once your test equipment can talk to your computer.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download and enjoy listening with a cold turkey sandwich.

Continue reading “Hackaday Podcast 245: The Silver Swan, ET’s Umbrella Antenna, Model Tanks Vs Space Shuttle Tires” →

Harvard SETI Project Helps ID Mystery Sound

November 23, 2023 by Tom Nardi 27 Comments

Last month, thousands of people in New Hampshire took to social media to report an explosion in the sky that was strong enough to rattle windows. Naturally aliens were blamed by some, while cooler heads theorized it may have been a sonic boom from a military aircraft. But without any evidence, who could say?

Luckily for concerned residents, this was precisely the sort of event Harvard’s Galileo Project was designed to investigate. Officially described as a way to search for “technological signatures of Extraterrestrial Technological Civilizations (ETCs)”, the project keeps a constant watch on the sky with a collection of cameras and microphones. With their gear, the team was able to back up the anecdotal reports with with hard data.

Continue reading “Harvard SETI Project Helps ID Mystery Sound” →

CinePi Project Promises Open Source Movie Making

November 20, 2023 by Tom Nardi 19 Comments

Today, there’s open source options for pretty much anything mainstream, but that doesn’t mean there aren’t still some niches out there that could benefit from the libre treatment. The CinePi project is a perfect example — before today we didn’t even know that an open hardware and software cinema-quality camera was out there. But now that we do, we can’t wait to see what the community does with it.

Inside the 3D printed enclosure of the CinePi, there’s a Raspberry Pi 4 with HQ camera module, a four-inch touch screen, a Zero2Go power supply with four 18650 cells, and a Notcua fan to keep it all cool. The design intentionally favors modules that are easy to source from the usual online sources. You’ll need to be handy with a soldering iron to follow along with the beautifully photographed assembly guide, but there’s nothing that needs to be custom fabricated to complete the build.

The software was clearly developed with the user experience in mind, and in the video below, you can see how its touch interface makes it easy to change settings on the fly. While an amateur auteur might need to enlist the assistance of their geeky friend to build the CinePi, it doesn’t look like they’ll need them around to help operate it.

Of course, the big question with a project like this: what does the video actually look like? Well the technical answer is that, in terms of raw performance, the CinePi is able to capture 3840 x 2160 CinemaDNG video to an external device such as a NVME SSD or a CFExpress Card at 25 frames per second. But what that actually looks like is going to depend on what kind of post-processing you do to it. For the more practical answer, check out the short film TIMEKEEPER which was shot partially on a CinePi.

If this all looks a bit high-tech for your liking, don’t worry. You could always 3D print yourself a 35 mm movie camera instead.

Continue reading “CinePi Project Promises Open Source Movie Making” →

2023 Halloween Hackfest: This Year’s Spooky Winners

November 20, 2023 by Tom Nardi 1 Comment

With the zombies, ghouls, and ghosts now safely returned to their crypts until next October, it’s time to unveil this year’s winners for the 2023 Halloween Hackfest.

For this contest, sponsors DigiKey and Arduino challenged the community to come up with their best creations for what’s arguably the most hacker-friendly of holidays. Pretty much everything was fair game, from costumes to decorations. The top three winners will get $150 credit from DigiKey and some treats from Arduino — just don’t try to eat them.

Continue reading “2023 Halloween Hackfest: This Year’s Spooky Winners” →

That Time NASA Built A Tiny Tank To Pop Shuttle Tires

November 17, 2023 by Tom Nardi 64 Comments

The Space Shuttle has often been called the most complex pieces of machinery ever built, an underhanded compliment if there ever was one. But it’s a claim not strictly limited to the final spacecraft. With a project as far ahead of the technological curve as the Shuttle was in the 1970s, nearly every component and system of the legendary spaceplane required extensive research and development to realize.

A case in point is that the speed and mass of the Shuttle at touchdown required tires that could survive forces far beyond that of a normal airplane. Pumped up to an incredible 350 psi, the space agency estimated each tire had the explosive potential of two and one-half sticks of dynamite. So while testing landing gear upgrades in the 1990s, they cobbled together an RC tank that could “defuse” a damaged tire remotely by drilling holes into it and letting off the pressure. Continue reading “That Time NASA Built A Tiny Tank To Pop Shuttle Tires” →