Laser Cigarette Lighter Makes Smoking Even More Dangerous

August 1, 2013 by Mike Szczys 64 Comments

Dangers involved with using this laser cigarette lighter to start off your smoking session include shooting your eyes out and giving yourself a mean Harry Potter style forehead scar. This thing boasts a two Watt laser diode which has no problem burning everything that comes in contact with it.

[Masterjoa3000] shows you how it was built in the video after the break. You need to acquire the diode and support hardware which acts as a heat sink. These are press-fit together before wires are attached to the positive and negative leads. The housing is just a bit too wide for the wind shield on the lighter, but that is fixed by cutting a ‘V’ out of the center of that shielding. Next comes a minuscule driver board which is soldered to the diode and to a momentary push switch. The switch takes the place of the flint so that pressing down on the striking wheel activates the laser. The whole thing still fits in the unaltered outer case.

Here’s another take on the same idea with the laser pointing in a different direction.

Continue reading “Laser Cigarette Lighter Makes Smoking Even More Dangerous” →

Making A Real Instrument Out Of A Kaoss Pad And Ribbon Controllers

August 1, 2013 by Brian Benchoff 6 Comments

swinger

MIDI guitars have been around since the 80s, and nearly without exception they are designed as direct, one-to-one copies of their acoustic and electric brethren. [Michael] has been working on turning this convention on its head with the Misa Tri-Bass, a MIDI guitar designed to be the perfect guitar-shaped synthesizer interface.

The tri-bass doesn’t produce any sound itself; instead, it’s a polyphonic MIDI controller with three channels controlled by three ribbon controllers on the neck. The body contains a huge touch screen divided into four MIDI channels, essentially turning this guitar into an instrument designed for electronic music first, and not an acoustic instrument kludged into filling an electronic role.

Unlike a whole lot of other digital guitar-shaped MIDI controllers, the tri-bass is actually made out of wood. Yes, the neck is made out of maple (inlaid with the three ribbon controllers, of course), and the body comes directly from a tree, with the styling inspired by a forgotten retro-modern design. It’s an impressive piece of kit, and we can’t wait to see [Michael]’s handiwork in the hands of digital guitarists the world over.

You can check out a video of [Michael] rockin out below.

Continue reading “Making A Real Instrument Out Of A Kaoss Pad And Ribbon Controllers” →

Vaporizer Rebuild

August 1, 2013 by Mike Szczys 36 Comments

vaporizer-rebuild

Wait! Don’t click away yet. Yes, this is a vaporizer project, but it has the distinction of being the most electronics engineering oriented post on the subject we’ve ever featured. [Mm Nn’s] vaporizer broke so he decided to fix it. After poking around inside it became clear that pretty much everything was trashed. So this ended up being a complete rebuild of all the support circuitry, with the heating element being the only electrical component he could salvage.

He started looking around for a power supply capable of driving the element from the Arizer V-tower vaporizer. He hoped that he could use a computer PSU but ended up having to buy one to suit; a Mean Well rs-100-24. He drives the system with a microcontroller (programmed in assembly) using PWM to adjust the element. Speaking of, there is a sensor built into the heating element that [Mm] isn’t using because he couldn’t figure out how to read from it. If you’ve got some ideas let us know in the comments.

HackRF, Or Playing From 30 MHz To 6 GHz

August 1, 2013 by Brian Benchoff 49 Comments

Up on Kickstarter, [Michael Ossmann] is launching the HackRF, an inordinately cheap, exceedingly capable software defined radio tool that’s small enough to lose in your laptop bag.

The HackRF was the subject of a lot of interest last time it was on Hackaday – the ability to receive up to 6GHz allows the HackRF to do a lot of very interesting things, including listening in on Bluetooth, WiFi, and 4G networks. Also, the ability to transmit on these frequencies means a lot of very interesting, and quite possibly slightly evil applications are open to anyone with a HackRF. Like the RTL-SDR dongles, the HackRF works with GNU Radio out of the box, meaning all those cool SDR hacks we’ve seen so far will work with this new, more powerful board.

Compared to the USB TV tuner cards that were so popular a year ago, the HackRF has 10 times the bandwidth, is able to receive up to 6GHz, and is also able to transmit. It’s only half-duplex, so to receive and transmit simultaneously you’ll need two HackRFs, or maybe wait for a hardware revision that will hopefully come sooner rather than later.

Below you can check out [Michael]’s presentation at Toorcon where the HackRF was unleashed to the world.

Continue reading “HackRF, Or Playing From 30 MHz To 6 GHz” →

ARM Dev Board With USB Uploading

July 31, 2013 by Brian Benchoff 42 Comments

[George and Bogdan] wrote in to tell us about a cool Kickstarter they’ve been working on. It’s called the MatchboxARM, and like other tiny-yet-powerful ARM dev boards floating around, this one features a very fast and capable processor and more than enough pins for just about any project. One interesting feature of this board, however, makes it stand out from the pack: it has a USB mass storage-based bootloader, meaning uploading new code is as easy as a drag and drop.

This isn’t the first dev board we’ve seen to sport this feature: the Stellaris Launchpad has had this for a while and even the lowly ATtiny85, in the form of a Digispark has a mass storage-based bootloader. The MatchboxARM, though, brings this together with a very powerful ARM microcontroller with enough I/Os, ADCs, PWM pins, and I2C and SPI ports for the most complicated projects.

Pair Of Aquarium Builds Are Masterpieces Inside And Out

July 31, 2013 by Mike Szczys 9 Comments

two-aquarium-builds

As you start to take in all that was involved with building these two aquariums it boggles the mind. At the time of writing the forum thread is 56 pages long and it’s not just filled up with the adoration of [Big Mr Tong’s] fans. He did so much work that every page is packed with progress pictures that cover the range of topics: plumbing, electrical, mechanical, artistic…. wow!

The ~~curse~~ project was sparked by a friend giving him a couple of huge acrylic cylinders which were a perfect size for custom aquariums. [Tong] even had a couple of ideas in mind for underwater artwork to fill them with. One is a replica of statue ruins that give you the feeling that the tank is a piece of Atlantis capture for your own entertainment. The other is a fascinating replica of a plumbing stack. You know, the large cast-iron pipes that carry away waste? But these are actually PVC parts with modeling clay accents. They were broken, cut, melted, sanded, and who knows what else, to arrive at this look. The different aquariums feature different lighting techniques. There’s custom-made filter baffles. We could go on and on but we won’t so check out the link at the top for all the details.

In the end he went beyond the original cylinders and built his own square tank for the pipe design. It’s a steam-punk piece so there’s even analog dials to display the vital signs of the habitat.

Just looking to maintain a tank you already own? How about building an automatic chemical dispenser.