A rotary subwoofer made out of a speaker coil, a medium-size fan an a grey wooden box to stand on.

Tear Apart Your House For $200 With This Rotary Subwoofer

September 8, 2023 by 44 Comments

Many movies and songs use a lot of of bass to make it feel more real to the viewer or listener. Because of this, subwoofers are common in high-quality audio setups, often costing a substantial part of the budget. [Daniel Fajkis] takes the subwoofer to it’s logical extreme by building a rotary subwoofer on a $200 budget.

The principle of a rotary subwoofer is that a normal subwoofer physically moves the air, and so does a fan. If you could make a fan oscillate the air instead of only pushing it, you could turn it into such a subwoofer, which is exactly what [Daniel] did. [Daniel] mounts a large electric motor on the case of an ex-subwoofer to spin the fan. Then, he uses the rotor linkage of a model helicopter and a modified subwoofer speaker to pitch the fan blades, spinning around to create a truly impressive gust of air oscillating at as low as 1 Hz.

The video, after the break, is well made with some good humor, including the legendary quote: “It’s gonna tear apart my household, there’s no way we’re surviving this one.”
Continue reading “Tear Apart Your House For $200 With This Rotary Subwoofer” →

Homebrew Linear Actuators Improved

September 8, 2023 by 19 Comments

[Harrison Low] published some 3D-printed linear actuators, which generated a lot of interest. He got a lot of advice from people on the Internet, and he took it to heart. The result: an improved version that you can see in the video below.

The original design used carbon fiber and Kevlar and was quite stiff. The actuators could move very fast, which was important to [Harrison]. However, they were also prone to wear and had issues with the force required to assemble them. He also wanted the design to be more modular to facilitate repair. The new design removes the bowden tubes, and the resulting actuator is both easier to assemble and easier to service.

Continue reading “Homebrew Linear Actuators Improved” →

An array of 2D barcodes stored on a ceramic medium. Each 2D barcode is 25 micrometers wide.

Cerabyte: One Terabyte Per Square Centimeter

September 8, 2023 by 45 Comments

Most of us will at one point have run out of storage and either had to buy a larger driver or delete some of those precious files. This problem can happen to data centers, too, with the ever-increasing amount of data stored on servers across the world. [Cerabyte] aims to fix this, with their ceramic-based media promising 1 TB/cm² of areal density.

To put into perspective just how much better this density is, we can compare it against SSDs and hard drives. At the time of writing, the densest SSD (NAND flash storage) is claimed to be 0.1825 TB/cm² and the densest hard drive is claimed to be 0.1705 TB/cm², which means 5.48 times and 5.87 times more dense respectively. The density improvement doesn’t end there — both an SSD and a single HDD platter might be a couple millimeters tall, while a [Cerabyte] layer claims to be merely 50 atoms tall.

[Cerabyte] aims to create 10 PB (10,000 TB) and later 1 EB (1,000,000 TB) racks with their technology, a feat difficult to achieve with mere hard drives. The ceramic-based media is written to using lasers and read from with a microscope, though throughput is limited to a “mere” 1 GB/s, which means filling that one rack could take as long as 110 days. Despite the relatively slow access times, we think this new storage technology is impressive, assuming [Cerabyte] succeeds.

Do you need so much storage that even [Cerabyte] can’t satisfy your needs? Simply use YouTube as infinite storage!

Will RadioShack Return?

September 8, 2023 by 145 Comments

We suspect that if you want to write a blockbuster movie or novel, the wrong approach is to go to a studio or publisher and say, “I have this totally new idea that is like nothing you’ve ever seen before…” Even Star Trek was pitched to the network as “Wagon Train to the stars.” People with big money tend to want to bet on things that have succeeded before, which is why so many movies are either remakes or Star Trek XXII: The Search for 4 PM Dinner Specials. Maybe that’s what the El Salvador-based Unicomer Group had in mind when they bought one of our favorite brands, RadioShack. They are reportedly planning a major comeback for the beleaguered brand both online and in the physical world.

In all fairness, the Shack may be better in our memories than in our realities. It was handy to stop off and pick up a coax connector, even if it cost three times the going rate for one. There was a time when RadioShack offered reasonable parts for projects, and it seems like near the end, they tried to hit that target again, but for many years, you could not find the typical parts for a modern project there anyway. However, Unicomer isn’t just a random group of investors.

Continue reading “Will RadioShack Return?” →

Hackaday Podcast 235: Licorice For Lasers, Manual Motors, And Reading Resistors

September 8, 2023 by 1 Comment

Name one other podcast where you can hear about heavy 3D-printed drones, DIY semiconductors, and using licorice to block laser beams. Throw in homebrew relays, a better mouse trap, and logic analyzers, and you’ll certainly be talking about Elliot Williams and Al Williams on Hackaday Podcast 235.

There’s also contest news, thermoforming, and something that looks a little like 3D-printed Velcro. Elliot and Al also have their semi-annual argument about Vi vs. Emacs. Spoiler alert: they decided they both suck.

Missed any of their picks? Check out the links below, and as always, tell us what you think about this episode in the comments!

Where to Follow Hackaday Podcast

Places to follow Hackaday podcasts:

Download it yourself. You can even play it backwards if you like.

Continue reading “Hackaday Podcast 235: Licorice For Lasers, Manual Motors, And Reading Resistors” →

Fitting 3D Prints In A Snap

September 8, 2023 by 27 Comments

The good news is that 3D printing lets you iterate on your design until it is just right. The bad news is that you often have to iterate your design over and over to get things to fit together. It is a little easier if you are designing both parts, but matching sizes and positions on a printed part that fits something that already exists can be a pain. Sure, you can grab the calipers and make fidgety measurements — but [Maker Tales] has a different approach. As you can see in the video below, he takes a photo, imports it into CAD, scales it, and then uses it as a reference.

If you have one, you could, of course, scan the existing part. However, if you’ve ever tried that, results vary wildly, especially with cheap hardware. [Maker Tales] just takes a picture with his phone, trying to get as straight as possible and from a distance. Once in CAD, he makes one measurement and scales the image to the correct size.

This is one of those things that should be obvious, but you don’t always think it through. Of course, it is possible to measure everything precisely or — even better — if you have the original CAD or drawing for the part that has exact measurements. But compared to making numerous precise measurements, this method is a lot less work and gives good results.

If you are creating mating parts, think about shadow lines. Many commercial parts now have CAD models as STEP files if you want to skip the scanning.

Continue reading “Fitting 3D Prints In A Snap” →

This Week In Security: LastPass Shoe Drops, Keys Lost, And Train Whistles Attack

September 8, 2023 by 8 Comments

There has been a rash of cryptocurrency thefts targeting some unexpected victims. Over $35 million has been drained from just over 150 individuals, and the list reads like a who’s-who of the least likely to fall for the normal crypto scams. There is a pattern that has been noticed, that almost all of them had a seed phrase stored in LastPass this past November when the entire LastPass database was breached.

The bulletproof security of the LastPass system depends in part on the rate limiting of authenticating with the LastPass web service. Additionally, accounts created before security improvements in 2018 may have had master passwords shorter than 12 characters, and the hash iterations on those accounts may have been set distressingly low. Since attackers have had unrestricted access to the database, they’ve been able to run offline attacks against accounts with very low iterations, and apparently that approach has been successful.

Microsoft’s Signing Key

You may remember a story from a couple months ago, where Microsoft found the Chinese threat group, Storm-0558, forging authentication tokens using a stolen signing key. There was a big open question at that point, as to how exactly an outside group managed to access such a signing key.

This week we finally get the answer. A crash log from 2021 unintentionally included the key, and Microsoft’s automated redaction system didn’t catch it. That crash dump was brought into development systems, and an engineer’s account was later accessed by Storm-0558. That key should not have worked for enterprise accounts, but a bug in a Microsoft key validation allowed the consumer systems key to work for enterprise accounts. Those issues have been fixed, but after quite a wild ride. Continue reading “This Week In Security: LastPass Shoe Drops, Keys Lost, And Train Whistles Attack” →