Bringing The Zach Morris Phone Into The 21st Century

February 17, 2013 by Brian Benchoff 27 Comments

DSCF7247

With the gravitas of [Michael Douglas] in Wall Street and the technological amazement of [Zach Morris] on Saved By The Bell, the classic 1980s ‘brick’ cell phone has a lot to offer these days. Not only is it large enough to be used as a blunt weapon, it’s also useful as an anchor and more durable than an old-school Nokia. Most, if not all of these phones have gone silent since analog cellular service went dead a few years ago, but that didn’t stop [Andrew] from bringing his back to life.

The core of this build is a 128×64 OLED screen that replaced the old seven-digit, seven-segment display and a very small GSM module. The ancient PCB was discarded and a new hardware revision was created in Eagle based on an Arduino-powered microcontroller. The buttons from the original phone remained, thanks to a custom designed resistive button footprint on the PCB and a bit of conductive ink.

What’s surprising is this phone actually works. [Andrew] can not only receive texts on his phone, but also send them using his own implementation of a number pad keyboard. It’s an awesome build, and from what we can tell, the first proper DIY cell phone we’ve ever seen. About time someone got around to that, and we couldn’t have hoped for a better form factor.

LED Ice Cubes Prevent Alcohol Induced Blackouts

January 9, 2013 by Brian Benchoff 121 Comments

cube

On November 23rd last year, [Dhairya] attended a little shindig at MIT. Three drinks into the night, he blacked out and woke up in the hospital the next day. It was an alcohol-induced blackout, and like all parties at MIT, there’s an ingenious solution to [Dhairya]’s problem.

[Dhairya] came up with an alcohol-aware ice cube made of a coin cell battery, an ATtiny microcontroller, and an IR transceiver are molded into an edible gelatin ice cube. The microcontroller counts the number of sips per drink, and after one glass of adult beverage changes the color of the flashing LED from green to yellow. After two drinks the LED changes from yellow to red, signaling [Dhairya] to slow down.

If [Dhairya] feels the night is too young and keeps on drinking, the IR transmitter signals to his cell phone to send a text to a friend telling them to go take [Dhairya] home.

Less than three weeks after waking up in the hospital, [Dhairya] tested out his glowing ice cubes at another party. Everything performed wonderfully, even if he admits his creation is a little crude. A neat piece of work, and we can’t wait to see an update to this project.

Continue reading “LED Ice Cubes Prevent Alcohol Induced Blackouts” →

Making A TARDIS Bigger On The Inside

December 27, 2012 by Brian Benchoff 25 Comments

tardis-pan

Over Thanksgiving, [Greg] had a little time on his hands and decided he needed an afternoon project. Having a few bits of plywood, an xacto knife, and some blue paint on hand meant a miniature TARDIS would take shape on his workbench. After finishing the model, [Greg] continued improving it with a blinky LED when the thought of adding an interior to the TARDIS entered his mind. An idea too good to pass up, really.

The TARDIS, of course, is smaller on the outside, so [Greg] needed a way to virtually model the interior of [9] and [10]’s home. After playing around with Blender for a few days, [Greg] had a reasonable 3D facsimile of the TARDIS interior. Now the only problem was to display it behind the front door.

[Greg] whipped up a small app for his phone that reads a zebra print pattern behind the door and overlays the 3D modeled TARDIS interior. Yes, it’s only viewable through augmented reality, but tilting the desktop TARDIS from side to side makes the entire console room visible. You can check out [Greg]’s TARDIS interior in the video after the break.

Continue reading “Making A TARDIS Bigger On The Inside” →

Android VOIP Phone And Raspberry Pi Mate For An Intriguing PBX Setup

November 26, 2012 by Mike Szczys 5 Comments

[Ward Mundy] has found something great by combining a GXP-2200 phone with Raspberry Pi to create a private branch exchange. So the idea behind a PBX setup is kind of like a company intranet. All of the phones in the system are assigned an extension number and have access to the internal system functions like voice mail, and sharing phone lines to the outside world. We’ve talked about using an RPi as a PBX before, but the high-tech phone he’s using this time around pulls everything together remarkably well.

The GXP-2200 is available for under $200. It runs Android and has a full color touch screen pictured above. It is marketed as a multimedia phone and indeed it brings Skype and Google Voice to the party. But it also offers six SIP lines. The hardware even seems to be planned for this type of use as the phone offers a second Ethernet port to which the RPi board can be connected. In this example [Ward] simply screws the RPi to the phone’s plastic stand and connects the two using a six-inch cable. From there the PBX can be configured with the phone’s browser. How’s that for slick?

Vodafone USB 3G Modem Driver From Mbed

November 2, 2012 by Mike Szczys 11 Comments

Wow, that’s a really simple hardware setup to supply your device with a 3G Internet connection. Better yet, the software side is just as simple thanks to the Vodafone USB Modem library for mbed. It will work for any of the cell data plans offered by Vodafone. The only problem you may have is not living in one of the 30 countries serviced by the telco.

The dongle seen at the right is sold by Vodafone and is meant to be used for Internet data, so you won’t be doing anything that might get your SIM banned. Connecting to the network is a one-liner thanks to the previously mentioned library. From there, gets and posts can be done with your favorite package. The Hello World example uses HTTPClient. And since the mbed is simply an ARM platform it shouldn’t be hard to use the library with the ARM chip of your choice.

We’re this Close To A Real Pip-Boy

October 22, 2012 by Brian Benchoff 47 Comments

Whether inspired by the vaults of Fallout or the mysterious wrist device worn by [Turanga Leela], we’re just glad to see someone finally made a wrist-worn cellphone,

The Ultimate Wrist Watch, as the creator [Rob] calls it, is based on his Motorola Defy smart phone, tucked inside a neatly modified iPod wrist band meant to hold a runner’s music player. Simply mounting a cellphone to a wrist would be a bit awkward and a huge drain on battery life, so [Rob] wrote an app to automatically turn on the display when the accelerometer detects the phone is in the correct watch-reading position, and turns it off when [Rob] lowers his arm once again.

Right now the Ultimate Wrist Watch only stands in for the functions of a standard wrist watch – time, date, a chronometer and stopwatch are just about the only features implemented so far. Still, this is dangerously close to the wrist-mounted computers we’ve been promised for so long.

You can grab the source for the Ultimate Wrist Watch on [Rob]’s git, or just download it off Google Play. Check out the video of the Ultimate Wrist Watch after the break.

Continue reading “We’re *this* Close To A Real Pip-Boy” →

Stacking GPS, GSM, And An SD Card Into An Arduino Shield

October 19, 2012 by Brian Benchoff 18 Comments

A few years ago, [Phang Moh] and his compatriots were asked by a client if they could make a vehicle tracking device for oil tankers all around Indonesia. The request of putting thousands of trackers on tanks of explosives was a little beyond [Phang Moh]’s capability, but he did start tinkering around with GPS and GSM on an Arduino.

Now that tinkering has finally come to fruition with [Phang]’s TraLog shield, a single Arduino shield that combines GPS tracking with a GSM and GPRS transceiver. There’s also an SD card thrown in for good measure, making this one of the best tracking and data logging shields for the Arduino.

The shield can be configured to send GPS and sensor data from devices attached to an I2C bus to remote servers, or a really cool COSM server. [Phang] is selling his TraLog for $150, a fairly good deal if you consider what this thing can do.

Seems like the perfect piece of kit for just about any tracking project, whether you want to know the location of thousands of oil tankers or just a single high altitude balloon.

Tip ‘o the hat to [Brett] for finding this one.