classic hacks

2777 Articles

Condenser Microphone Building

April 22, 2009 by 28 Comments

mic

Browsing around today, this project caught our eye. Mainly due to the visual similarity to, well, personal massagers. As it turns out, it’s a home made studio condenser microphone. We would generally prefer to link directly to his personal page, that has a slightly more in dept write up, but it has popups and pop unders, so enter at your own risk.  Generally condenser mics require phantom power to make the magic happen, but he has included a circuit to run them off of 9v batteries. We’ve done condenser mics before, but this seems a bit quicker and dirtier.

Making Cool Looking PCBs

April 21, 2009 by 25 Comments

pretty_pcb

[Mike] has posted an instructable on making cool looking PCBs. He does it a little differently than we do. He uses soda cans for the stencils and combines the solder mas and silk screen steps. Also, a bit of extra cooking gives him this cool gradient of color. He has managed to get some really fine etching. It isn’t as fine as a laser etching, but this should be able to handle the smallest stuff you can throw at it. We’re a bit curious what exactly he’s building. There’s a color picture after the break to show you what we mean.

Continue reading “Making Cool Looking PCBs” →

High Speed Book Scanner From Trash

April 20, 2009 by 28 Comments

book_scanner

[Daniel] sent us his entry to the Epilog laser cutter challenge on instructables. He made a book scanner, mainly out of found parts. The bulk of the project was salvaged from dumpsters, though if you’re not comfortable with that, the free section of craigslist might be able to do the job. The cameras are loaded with CHDK, using StereoData maker, and custom software to compile the images into PDFs. They did a fantastic job of documenting every step of the construction, including helpful tips for some of the more complicated parts. There are several videos in the instructable, so be sure to check them out. We’re particularly amused by the extra step of making the photo captions visually interesting. At 79 steps, it’s a long read, but well worth it.

3D Printing At Home

April 19, 2009 by 36 Comments

3dprint

We’ve seen a lot of 3d printing lately, with the RepRap and Cupcake, both the fused deposition modeling type. We don’t often see the Inkjet method. This is a great example of one, built in someones home. Instead of laying down layers of molten plastic, he uses the inkjet system to deposit glue like substances into layers of plaster. This project is much higher resolution than the other two, as you can see in the video of it making an RC engine case below. He is currently rebuilding it to be even better and larger.

Continue reading “3D Printing At Home” →

Wiitar, A Build Log

April 17, 2009 by 13 Comments

wiitar

[Ozan] sent in this build log from when he made a Wiitar. As you can probably guess from the title, it’s a guitar combined with a wiimote. He has completely gutted the Wiimote and installed the internals in the guitar. Some toggle switches were mounted to control the button states on the Wiimote.  This is a pretty useful setup as you can use the Wiimote data to control effects on the guitar. We’ve actually seen a very similar setup before. [Ozan] has included the build log, as well as a simple glovepie script and a sample effect patch.

Mini Arcade Cabinets

April 15, 2009 by 23 Comments

mini-arcade

[Pocket_Lucho] has really done a fantastic job on this one. He’s making miniature arcade cabinets(translated) from old consoles.  This post is mainly talking about a Sega genisis version, but he’s also done one for the PC engine(aka turbografix 16). He takes us through pulling RGB video strait from the chip as well as harvesting buttons from a cheapo all in one arcade controller. For the screen he’s using a PSone portable LCD, pretty much un modified. What really stands out is the final layout. He has built tiny arcade cabinets, about a foot tall, to house them. These are amazingly awesome and we want one. No, we want an entire mini arcade of them. You can see a video after the break.

Continue reading “Mini Arcade Cabinets” →