Want to see what kind of shenanigans we’re up to at Maker Faire Bay Area? We’ll be tweeting all weekend. Use #hadmf and follow this list for the Hackaday Crew.
Featured3153 Articles
Longform articles, the best of what the Hackaday writing crew has to offer.
ISEE-3: Ready To Come Home
The team working to reboot the ISEE-3 satellite hurtling towards an August encounter with Earth is hard at work. They’ve put up a crowdfunding page, and now that they’re completely funded (don’t stop donating, btw), they’re starting to go deeper into the waters that will allow them to capture a forgotten satellite.
The project put up a status report going over what they’ve accomplished so far, and what work has yet to be done. For a few months now, they knew both transmitters aboard the craft were operational, but they were not sending telemetry. The team has gone through the documentation, came up with a set of commands, and are currently en route to Arecibo to transmit those commands.
Two ground station transmitters are being constructed, one specifically built to be installed at Arecibo for this application. The other is a portable, self-contained 700 watt transmitter that will be used at the official ISEE-3 ground station in Morehead State University in Kentucky.
With transmitters taken care of and receiving handled by an SDR from Ettus Research, a lot of work has focused on the command and telemetry systems. In 1978, the user interface for commands and telemetry was primitive to say the least. The team is now working on a system built-in Labview that’s much easier on the eyes than the vintage text terminal screens.
So far, signals from ISEE-3 are planned to be received at Arecibo, Morehead State, and Bochum observatory in Germany. This will give the team extremely good coverage for most of a day, and there are other ground stations in California that will extend the time the team is able to communicate with ISSE-3 each day by a few hours.
There’s still a lot of work to be done; the team really doesn’t know what systems are still operating, although most of them did make it 20 years with only one fault. In the next few days, we’ll all get to see if this satellite will be up to the task of coming back home to Earth. If everything goes to plan, ISEE-3 will be on track towards a 17 hour burn to put it on the correct trajectory some time in mid June.
Find The Giant Jolly Wrencher At Maker Faire This Weekend
Check it out, I made something really geeky for Maker Faire. If you’re going to be in San Mateo this weekend for Maker Faire Bay Area, watch for the floating Skull and Wrenches. I won’t be alone, and my compatriots and I will be loaded down with stuff to give away to those who ask for it. If you are hell-bent on finding us, just check this Twitter list as we’ll frequently be tweeting our locations and exploits.
Want to grab a beer with some other Hackaday folk? Even if you’re not attending the Faire, you can take part in the festivities. We’re descending on O’Neil’s Irish Pub on Saturday night. You might want to let us know you’re coming. You can show up unannounced, but we can’t guarantee that you’ll be able to squeeze into the 80-person-pub. If we have way too many hackers overflowing into the street we’ll probably split the party up and go bar hopping. The place is apparently right next to a train stop for your traveling convenience. We just hope to keep things tame enough to make it to Maker Faire again on Sunday morning, but we can’t guarantee that either ;-)
Developed On Hackaday: License Incompatibilities And Project State
It has been a while since we wrote an article about our ongoing offline password keeper project, aka the Mooltipass. Our last post was asking our dear readers to vote for their favorite card art, so what have we been doing since then?
For the last few weeks we’ve mostly been improving our current PCBs and case design for the production process to go smoothly. The final top PCB shown above has been tweaked to improve his capacitive touch sensing capabilities, you may even see a video of the system in action in the Mooltipass project log on hackaday.io. We’ve also spent some time refining the two most popular card art designs so our manufacturers may print them correctly. We’ll soon integrate our updated USB code (allowing the Mooltipass to be detected as a composite HID keyboard / HID generic) into the main solution which will then allow us to work on the browser plugin.
It’s also interesting to note that we recently decided to stop using the GPL-licensed avrcryptolib. Our current project is CDDL licensed, allowing interested parties to use our code in their own project without forcing them to publish all the remaining code they created. The GPL license enforces the opposite, we therefore picked another AES encryption/decryption implementation. This migration was performed and checked by our dedicated contributor [Miguel] who therefore ran the AES NESSIE / CTR tests and checked their output, in less than a day.
We’re about to ship the first Mooltipass prototypes to our active contributors and advisers. A few weeks later we’ll send an official call for beta testers, just after we shown (here on Hackaday) what the final product looks like. Don’t hesitate to ask any question you may have in the comments section, you can also contact us on the dedicated Mooltipass Google group.
Get Your Uni, School Or College Involved In The Hackaday Prize
We’ve been busy contacting design tech and electrical engineering education departments to tell them about The Hackaday Prize, but there are only so many of us and we could do with your help to get the word out.
Are you excited about The Hackaday Prize? Do you think more people at your school should know about it so they can take part? Either way, please help us help them by emailing prize@hackaday.com to let us know what program coordinators, student group, or other people we should contact. If appropriate, we have a bunch of promotional materials we would like to send out to some of these awesome hackers.
You can also help us by telling your hacker designer friends, posting about The Hackaday Prize on college social media (#HackadayPrize), or letting the student newspaper know. We want to get as many universities, colleges and high schools involved as possible. Many senior year project ideas would make great starting points for THP entries, and we want to make sure students take up this opportunity to show off what they can do (and hopefully win some stuff in the process). This makes a great summer project, and looks great when applying for colleges or jobs in the future.
Remember you have until August to get your entry in, but the sooner you post it on Hackaday Projects, the sooner you can potentially start winning rewards. We have hundreds of tshirts, stickers, patches, posters and other swag up for grabs on the way to winning The Hackaday Prize.
Hackaday At Maker Faire
If you are planning your trip to Maker Faire Bay Area — May 17th and 18th — why not hunt down the Hackaday crew? We’ll be packing a ton of swag to give out to anyone who asks for it. But ideally we’d like to show off the best hardware we can find so don’t come empty-handed!
Want your Maker Faire stuff featured on Hackaday? You can Tweet in advance to let us know when you’ll be there and what you’re bringing. You can also track us down during the weekend as we’ll be frequently Tweeting our locations. Here is the contact list and information on some festivities we’re planning:
Hackaday Meetup With HeatSync Labs And The Tymkrs
We know a lot of hackers will be heading to Maker Faire next weekend. If you find yourself passing through Mesa, AZ on your way or you’re a local hacker enthusiast then please feel compelled to drop by HeatSync Labs on May 15th between the hours of 5pm and 9pm for an informal gathering. You will get to meet HeatSync Labs hackerspace members and The Tymkrs (Whiskers and Addie) who are founders of The Rabbit Hole hackerspace in Rochester, Minnesota. Sorry for the late notice, I thought it would be a great opportunity to organize an impromptu hacker meetup in order to include The Tymkrs as they pass through town on their epic summer road trip.
If people have a project or photos of a project they’re working on I would enjoy hearing all about it and I’m sure others would as well. I’m looking forward to visiting everyone that can attend!
For those who show up early there should be plenty of pizza, soda and Hackaday swag to go around. I’d like to thank the members of HeatSync Labs for kindly letting me schedule a Hackaday style meetup at their hackerspace on such short notice. There will be some food and drink so don’t be too late or you might go hungry.
Meetup address: HeatSync Labs 140 West Main St. Downtown Mesa, AZ
