Could Solar-Powered Airships Offer Cleaner Travel?

The blimp, the airship, the dirigible. Whatever you call them, you probably don’t find yourself thinking about them too often. They were an easy way to get airborne, predating the invention of the airplane by decades. And yet, they suffered—they were too slow, too cumbersome, and often too dangerous to compete once conventional planes hit the scene.

And yet! Here you are reading about airships once more, because some people aren’t giving up on this most hilarious manner of air travel. Yes, it’s 2024, and airship projects continue apace even in the face of the overwhelming superiority of the airplane.

Continue reading “Could Solar-Powered Airships Offer Cleaner Travel?”

Switching Regulators For Dummies

We often use linear regulators in our designs. They are cheap and simple – you put the regulator chip itself on the board, add two capacitors, and get a voltage. Linear regulators are imperfect, of course – they can’t help but waste the voltage difference as heat, for a start, which straight up excludes them for high-current purposes, or significant voltage difference conversions, unless you have a hefty heatsink handy. They also can’t boost voltage, which means you can only go from high to low – a bit of a disappointment.

Of course, we haven’t been just throwing our hands up in the air if a linear regulator doesn’t fit our purpose. Switching regulators have none of these disadvantages, which is why your mobile phone alone has a few dozen of these. They are way more efficient and hi-tec, able to convert one voltage into another while losing hardly any power into heat. All that you need to do is switch an inductor at a somewhat high frequency!

However, for some, switching regulators might look a bit intimidating. They tend to have higher standards for board layout compared to linear regulators, and, they do need an inductor – sometimes, a few more components too. Inductors alone are somewhat intimidating components, with a fair few more parameters than we’d expect, and you might get confused when looking into adding a switching regulator to your circuit.

No more! In this article, I shall give you the switching regulator basics, remove any fog of war that might be clouding your vision, and show you just how easily you can get a good few amps at your favourite voltage whenever you need it. Continue reading “Switching Regulators For Dummies”

X-Ray Investigations Hack Chat

Join us on Wednesday, January 24 at noon Pacific for the X-Ray Investigation Hack Chat with Ahron Wayne!

It’s hard to imagine a world where we didn’t figure out how to use X-rays to peer inside things. Before Röntgen’s discovery that X-rays could penetrate living tissue, doctors had only limited (and often unpleasant) ways to get a look at what was going on inside the human body, and few of us would want to return to those days.

As fantastically useful as X-rays and later computed tomography (CT) became in medicine, it didn’t take too long for other uses for the technology to come along. Non-clinical applications for X-ray and CT abound, including their use in non-invasively exploring relics of immense archaeological value. One recent effort in this space that gained a lot of coverage in the press was the combination of CT imaging and machine learning to read the ink inside carbonized papyrus scrolls from the ruins of Pompeii.

join-hack-chatThe result was the “Vesuvius Challenge,” where different teams looked for techniques to virtually unwrap the roasted relics. Ahron’s contribution to the project was a little unusual — he bought a used desktop CT scanner, fixed it up, and started experimenting with reading ink from the carbonized remains of simulated papyrus scrolls. In other words, he made some scrolls, cooked them to beyond well-done in the oven, and tried to understand what happens to ink on papyrus that gets blasted by a volcano. If that’s not enough to get you to stop by the Hack Chat when Ahron joins us, we’re not sure what else would be! Suffice it to say we’re pretty excited about what Ahron has to say about DIY CT,  X-rays, collaborative open-source citizen science, and unwrapping the mysteries of Pompeii.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, January 24 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

Featured image: Daderot, CC0, via Wikimedia Commons

Hackaday Links Column Banner

Hackaday Links: January 21, 2024

Have you noticed any apps missing from your Android phone lately? We haven’t but then again, we try to keep the number of apps on our phone to a minimum, just because it seems like the prudent thing to do. But apparently, Google is summarily removing apps from the Play Store, often taking the extra step of silently removing the apps from phones. The article, which seems to focus mainly on games, and has a particular bone to pick about the removal of RPG Wayward Souls, isn’t clear about how widespread the deletions are, or what exactly the reason behind the removals could be. But they sure are exercised about it, and rightly so since in some cases the deleted games have actually been paid for by the users, and Google pretty much says that if you think you’re getting a refund, think again. They make some interesting points, such as this being the very definition of larceny, while also acknowledging that in all likelihood Google has a get-out-of-jail-free card buried in some EULA somewhere permitting them to do exactly what they’re doing. Google’s gonna Google, right?

Continue reading “Hackaday Links: January 21, 2024”

Hardware Should Lead Software, Right?

Once upon a time, about twenty years ago, there was a Linux-based router, the Linksys WRT54G. Back then, the number of useful devices running embedded Linux was rather small, and this was a standout. Back then, getting a hacker device that wasn’t a full-fledged computer onto a WiFi network was also fairly difficult. This one, relatively inexpensive WiFi router got you both in one box, so it was no surprise that we saw rovers with WRT54Gs as their brains, among other projects.

Long Live the WRT54G

Of course, some people just wanted a better router, and thus the OpenWRT project was born as a minimal Linux system that let you do fancy stuff with the stock router. Years passed, and OpenWRT was ported to newer routers, and features were added. Software grew, and as far as we know, current versions won’t even run on the minuscule RAM of the original hardware that gave it it’s name.

Enter the ironic proposal that OpenWRT – the free software group that developed their code on a long-gone purple box – is developing their own hardware. Normally, we think of the development flow going the other way, right? But there’s a certain logic here as well. The software stack is now tried-and-true. They’ve got brand recognition, at least within the Hackaday universe. And in comparison, developing some known-good hardware to work with it is relatively easy.

We’re hardware hobbyists, and for us it’s often the case that the software is the hard part. It’s also the part that can make or break the user experience, so getting it right is crucial. On our hacker scale, we often choose a microcontroller to work with a codebase or tools that we want to use, because it’s easier to move some wires around on a PCB than it is to re-jigger a software house of cards. So maybe OpenWRT’s router proposal isn’t backwards after all? How many other examples of hardware designed to fit into existing software ecosystems can you think of?

Hackaday Podcast Episode 253: More Wood Robot, Glitching And Fuming Nitric Acid, We Heart USB-C

This week Hackaday Editors Elliot Williams and Tom Nardi start things off with a traffic report from the Moon, which has suddenly become a popular destination for wayward robots.

Anonymizing an ATtiny85 via laser

From there, they’ll go over a fire-tending contraption that’s equal parts madness and brilliance, two decades of routers being liberated by OpenWRT, impressive feats of chip decapping, and USB-C’s glorious rise to power.

You’ll also hear about the latest developments in laptop RAM, exploits against the flash encryption used on the ESP32, and Android powered oscilloscopes. The duo will wrap things up with horror stories from the self-checkout aisle, and a look at the fantastical rolling power station that Dan Maloney has been building in his driveway.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Oh look, an MP3 version!

Continue reading “Hackaday Podcast Episode 253: More Wood Robot, Glitching And Fuming Nitric Acid, We Heart USB-C”

This Week In Security: Gitlab, VMware, And PixeFAIL

There’s a Gitlab vulnerability that you should probably pay attention to. Tracked as CVE-2023-7028, this issue allows an attacker to specify a secondary email during a the password reset request. Only one email has to match the one on record, but the password reset link gets sent to both emails. Yikes!

What makes this worse is there is already a Proof of Concept (PoC) released, and it’s a trivial flaw. In an HTTP/S post containing the password reset request, just include two email addresses. Thankfully, a fix is already out. Versions 16.7.2, 16.6.4, and 16.5.6 contain this patch, as well as fixes for a flaw that allowed sneaking unauthorized changes into a previously approved merge request, and an issue with Slack and Mattermost where slash commands could be spoofed.

VMware

We don’t want to over-dramatise this vulnerability, but VMware is calling it an emergency. This one affects VMware vRealize and Aria Automation. According to the the CVSS calculator, it’s a low complexity network flaw, but does require at least some privileges. Hopefully more information will come out about this vulnerability, but for now that’s about all we know.

Continue reading “This Week In Security: Gitlab, VMware, And PixeFAIL”