[youtube=http://www.youtube.com/watch?v=q38NxsKetgo]
Here’s a cool tip, sent in by [Martin]. He has put together this very compact package for an animated 8×8 RGB LED array with a tiny footprint. It is controlled by an ATMega16 powered by 2 small lithium cells. While it may not be quite as small as the space invader button, it seems to have a bit more animation horsepower.
[NRP] sent us a few of his projects. The most notable of the bunch was a school project funded by Disney. They were to make some kind of interactive entertainment for people waiting in line for rides. They decided on a wand style interface. Each wand has an accelerometer, an IR LED for tracking, an XBee unit, and a few buttons for interaction. They wrote some custom games and a multi person white board to test it all out. You can see those in action, along with a space themed pong game in the video after the break. Even though this was funded by Disney, you can still find all the source code and schematics, available for free.
[Wolf] built this LED Enterprise model. It’s a ‘sparebot‘ assembled from leftover LEDs and resistors. Unlike most sparebot sculptural oddities, this one actually works. If you place it near a magnet, a reed switch closes to turn on the LEDs. A mechanical switch would have just caused more stress on the model. The part count is very low, but took some forethought. Two resistors are used to raise the resistance of the red LEDs to match the white LED. A quite clever and simple model.
We would be thrilled to get something like this in the mail. What you are looking at is the inside of probably the coolest invitation ever to be mailed. This LED array was enclosed in a mirrored box so all you could see were the lit LEDs. This was then inserted into a hole all the way through a catalog. You’ll have to see the pictures on their site to get the full effect. Only 40 of these were sent out, so we probably won’t get a chance to play with one ourselves. They mentioned that the first prototype was soldered by hand, just to make sure everything worked.
[via Moritz Waldemeyer]
NOR_/D has just released their newest multitouch display system. The TouchKit Spark features a larger 35.4x23inch display surface than its predecessor, the Run. It uses ultrabright IR LEDs around the screen’s border for FTIR multitouch sensing. A high frame per second IR camera is included to increase tracking performance. The screen is fully assembled, but you need to provide your own projector and case. It can be built at table height or as low as 20inches. The device is designed to work with OpenFrameworks, but future software releases will have TUIO support.
Ever wanted to make your own LED? You might be tempted to after reading how easy it is. No, this won’t really be a practical LED that you would use to light a project, but it is very cool anyway. [Michael] picked up a box of Moissanite, or Silicon Carbide, on eBay for roughly $1. Making the LED is as easy as putting your positive lead to the crystal and touching it with a sewing needle attached to a negative lead. He has tips on how to get the best results as well as a little bit of history of LEDs on the site.
[thanks Andreas]
[Tom] sent us a link to this very professionally done project. He built a bike light that is a 540 lumen Luxeon light with a custom case. The LED, Lens, and driver were purchased first. Everything else was designed around it. The design is compact and good looking. You can download the CAD files on the site if you want to make your own. He is using an Atmel AVR ATTiny13 to control brightness.
