Devil Horns Adorn The Hood Of My Truck

June 1, 2011 by Mike Szczys 31 Comments

When you’re hunting zombies you’ve got to give them something to fear. [Shannon Larratt] is getting ready for that eventuality by adding devil horns as his hood ornament. It looks awesome from afar, but when you see the close-up images you realize how lifelike this is. That’s because it’s not a sculpture. [Shannon] cast the ornament in a mold made from his own hand.

The process started with some dental alginate which he slobbered all over his hand as he held the devil horns pose. After the mold had hardened he cast the ornament using fast-curing black plastic resin.

With the ornament now in hand he needed a way to secure it to the hood of his vehicle. He picked up a threaded U-bolt. A hole and a slot were carved in the base of the ornament to receive the U-bold and a straight bolt for a trio of anchor points. More of the black resin fills the holes, securing the bolts and making it a snap to mount the ornament by drilling through the hood.

We also find it awesome that during this process [Shannon] took the time to cast his daughter’s fist for use as a door knob at home.

Automated Hose Keeps Cats From Watering You

May 25, 2011 by Jesse Congdon 50 Comments

Commenter [TheCreator] reminded us of this fantastic video from [Craig Turner] who you may recognize from SBS’s Top Gear Australia Video Competition. You see, [Craig] has been struggling for some time with the problem of neighborhood cats relieving themselves pretty much all over his stuff. Through surveillance he identified (and named) around 9 separate cats sauntering into his yard during the wee hours of the night. The only issue now was to humanely discourage them from entering his yard.

The best solution, in this case, was a simple spray from the garden hose, but who is going to stay up all night to watch for cats? [Craig]’s ’75 Galant happens to have aftermarket door locks. These typically contain a simple powerful 12V actuator that will push or pull when given current. The actuator is strong enough, and has enough travel, to depress your typical garden sprayer handle. The lock actuators even include enough mounting hardware to tack everything together. The only irreversible part of the hack appears to be the hole drilled into the sprayer’s handle.

The job of cat detection is handled with a PIR sensor (sourced from his home security system) and a paper towel tube to narrow the detector’s field of view. Placed at animal height the PIR detector works like a trip line, and flips a relay connected to an array of devices: A bright LED lamp, a DSLR set to take several quick photos of the victim, An HD video camera, and the sprayer solenoid. This whole rig is placed at a convenient choke point and hilarity ensues! A schematic is included in the video but is pretty difficult to interpret, we transcribed it for you. Some details are unclear but essentially a few relays are stapled together to provide either high or low switching signals.

Check out the video, [Craig]’s schematic, and our interpretation of [Craig]’s schematic after the jump!

Continue reading “Automated Hose Keeps Cats From Watering You” →

Hand-cranked Magnet Machine Is Endless Fun

May 25, 2011 by Mike Nathan 41 Comments

magnet_machine

We can’t think of a single person who doesn’t enjoy playing with a handful of rare earth magnets now and again. We know that [Dave Johnson] certainly does. As a gift to his father in law, he constructed a magnificent machine that does little more than manipulate spherical rare earth magnets with hypnotizing grace.

The machine is constructed almost entirely from wood, save for a few fasteners and rods. Even the gears have been carefully cut from wood, with special attention paid to ensure smooth operation. When cranked, the machine slices off a single magnet from one end of a long chain, passing it along to a lift arm. The lift arm deposits the magnet into a metal tube, and with the help of eddy currents, it drifts slowly down before being redeposited at the end of the magnet chain.

Be sure to check out a video demonstration of the machine after the break, it really is fun to watch.

[via LaughingSquid]

Continue reading “Hand-cranked Magnet Machine Is Endless Fun” →

Building A Brushless Motor Controller

May 24, 2011 by Mike Nathan 12 Comments

brushless_motor_controller

Brushless motors and the way in which they are controlled can be a bit of an enigma to those just starting out in hobby electronics. [Andrew] from spingarage thought it would be helpful to put together a quick tutorial showing how he built a simple brushless motor controller in about a day’s time. He constructs everything on protoboard from components he acquired at RadioShack in order to demonstrate the ease of sourcing parts and building a brushless motor driver.

While he skips most of the theory behind brushless motor control itself, he does touch on the signaling these motors require for movement as well as how motor position is determined. Specifically, he expands on how half-bridges can be used to create the sine wave signaling required by a single motor input, as well as how three of these can be combined to drive a brushless motor.

The post is the first in a series of posts about brushless motors, so we should see some code examples and some practical applications in the near future.

Sound Localization And A Treaded Rover

May 23, 2011 by Mike Nathan 3 Comments

soundlocalization_and_a_robot

[Jad] recently wrote in to share a pair of projects that have been keeping him busy as of late.

The first is a sound localization system not unlike one we showed you a few weeks ago. The difference is that his system displays the sound source via a set of LEDs rather than by motion, making it far less prone to interference by things like servo noise. His system uses four identical circuits, each of which are wired to a separate analog input on the Arduino. Each channel is adjustable, making it easy to tweak how the system responds to a particular sound.

His second project is a sizable robot built on the Motoruino platform. His contraption features several stacked control boards that handle the bots locomotion as well as camera control. It connects to his computer via a Bluetooth module that boasts a 1 mile range, allowing him to control everything from his PC. [Jad] is using the robot as a prototype for a much larger scale creation, and he says that his current focus is getting the robot to track and follow objects automatically using the on-board camera.

Continue reading to see a small preview of his bot’s progress so far.

Continue reading “Sound Localization And A Treaded Rover” →

An Odd Little Box

May 23, 2011 by Mike Szczys 11 Comments

Here’s an odd little box that might get those creative juices flowing for the upcoming Halloween season. [Jeremy’s] creepy glowing box has a pair of ping-pong ball eyes which diffuse the red light from a pair of LEDs. Both the lid and they eyes move, and the whole thing is set up for wireless control.

The majority of the parts came from a toy RC helicopter that [Jeremy] had sitting in his junk bin. After close inspection he found that the electronics included to motor drivers for the two rotors, as well as two servo motors which worked to steer the aircraft. One of those servos has been repurposed to aim the gaze of they eyes left and right, the other servo is used to lift and close the lid of the box. This leaves the two motor controllers, one of which switches the LEDs on and off. The other doesn’t really have a purpose yet. He tried adding one wheel to the box, but turning that on just makes the whole thing crash to the floor. Check out what he’s done so far in the clip after the fold.

Continue reading “An Odd Little Box” →

BAMF2011: Bloxes, A Building Kit With A Nifty Pedigree

May 21, 2011 by Phil Burgess 17 Comments

Not every cool hack needs to involve microcontrollers, LEDs or other bling. We were initially drawn to the Bloxes display simply because we love a good multipurpose construction set, whether it be Lego, 80/20 aluminum, or in this case, a system of interlocking cubes formed from six identical pieces of corrugated cardboard, cut and scored in such a manner as to form a surprisingly sturdy little building block. They can become simple furniture, groovy Logan’s Run-style room decor, or the all-important kids’ forts…then later dismantled and made into something else.

Continue reading “BAMF2011: Bloxes, A Building Kit With A Nifty Pedigree” →