Robot Can Barely Move With So Much Hardware Strapped To It

web-server-robot

We think that [Andrej Škraba] needs to start looking for a beefier motor platform. This little robot has so much hardware strapped to it the motors can barely keep up. But with a little help it can make its way around the house, and it takes a whole lot of connectivity and computing power along for the ride.

The white stick on the top is a single-board computer. The MK802 Mini sports an A10 processor and up to a gig of ram. Just below that is a USB hub which is sitting on top of a USB battery pack. This powers the computer and gives him the ability to plug in more than one USB device. The robot chassis is from Pololu. It uses an Arduino and a motor shield for locomotion, with commands pushed to it via USB.

This setup makes programming very easy. Here [Andrej] has a keyboard and HDMI monitor plugged in to do a little work. When not coding it can be disconnected and driven over the network. He makes this happen using an Apache server on the MK802 and node.js. See a demo of the system in the clip after the break.

Continue reading “Robot Can Barely Move With So Much Hardware Strapped To It”

Webcam Eye-tracking Moves Robot-powered Skittles Candy

robot-powered-skittles

This is a great hack, and it’s an advertisement. We wish this were the norm when it comes to advertising because they’ve really got our number. Skittles enlisted a few engineers to build a web interface that moves robot-powered candies.

When we started looking into this we figured that a few robots were covered with over-sized cases that looked like Skittles. But that’s not it at all. What you see above is actually upside down. The top side of the white surface has one tiny wheeled robot for each candy. A magnet was embedded in each Skittle which holds it to the underside of the surface. The user interface was rolled out on a Facebook page. It uses a common webcam for eye tracking. When you move your eyes, the robot controlling your assigned candy moves in that direction. See for yourself in the cllip after the break.

So we say bravo Mars Inc. We love it that you decided to show off what’s behind to curtain. As with the Hyundai pixel wall, there’s a whole subset of people who might ignore the ad, but will spend a lot of time to find out how it was done.

Continue reading “Webcam Eye-tracking Moves Robot-powered Skittles Candy”

The Hexapod Hexacopter

Hexapod Hexacopter

Over at Mad Lab Industries, they had the idea of building a quadcopter that could walk and fly. By combining a hexapod with a hexacopter, they ended up with this creation.

The hexapod part started off with PhantomX Hexapod Kit, but it was far too heavy to fly. To reduce weight, they manufactured carbon fibre parts for the frame and legs. Even with the weight reductions, they still needed to six rotors to keep it stable.

The hexacopter part of the build uses more custom carbon fibre parts to mount the motors. The booms and mounts are also custom built out of aluminium. They used six E-Flite motors, propellers, and ESCs to provide lift.

A variety of controllers are used to run the robot. Two Arbotix devices handle the hexapod control, and a Hoverfly flight controller keeps it in the air. It’s controlled remotely using a Spektrum controller.

They have some ambitious next steps, including a mechanism that disconnects and reconnects the hexacopter and the base. After the break, check out a video of this impressive build in action.

Continue reading “The Hexapod Hexacopter”

A Hexapod Robot Made From Scrap

radial-robot

Many if not most good hacks come from scrap or unused parts, but this hexapod robot takes it to a new level. [Helmut] wrote in to tell us about his ‘bot built from discarded electronics. As with most of the little walkers that we’ve featured here, this robot features some basic obstacle avoidance with a sensor array on the head unit.

The way the head controls this robot is really the interesting thing about this setup.Rather than send a signal to tell servo motors to walk in a certain gait, the head physically tilts in the direction that it should go. Although it’s somewhat hard to tell, it appears that a driving motor in the head assembly pushes a sort of camshaft down into the body. This is then mechanically coupled to the legs causing it to walk in the correct direction.

Be sure to check out the videos after the break, featuring narration by a computer in English, or by a human in German if you happen to sprechen sie Deutsch. Continue reading “A Hexapod Robot Made From Scrap”

Retrotechtacular: A 1983 Walking Robot Called ODEX-1

odex-1

ODEX-1 is called the first commercial walking robot in this video from 1983. Of course you will quickly recognize this as a hexapod. It’s hard to get over the fact that what was so advanced at the time can now be built at home relatively inexpensively.

As with most of these retrotectacular posts the presentation is a big part of the fun. The audio track right at the beginning of the video expresses the shock at seeing such an advanced robot walking through the building (it’s coming right for us?!). The trends in engineer garb are also on display. ODEX-1 is being heralded as the solution to mechanized travel in an environment full of ladders and stairways. Apparently it can get traverse the stairs, but you’d better be ready to wait a while for it to get anywhere. See for yourself in the video after the break.

Continue reading “Retrotechtacular: A 1983 Walking Robot Called ODEX-1”

Bird Buggy Soothes A Screeching Parrot

bird

[Andrew] has enjoyed the company of [Pepper] the parrot for more than a decade, but the screeching of a bird in the next room is something you just don’t get used to. [Pepper] gets very lonely some times, and short of having someone carry him around on a shoulder, there’s not much that will calm this parrot down. [Andrew] had the idea of allowing [Pepper] to wander around the house with the help of a mobile platform. Thus was born the Bird Buggy, a parrot-controlled vehicle built just for [Pepper].

The buggy itself is a basic two-wheel drive platform driven with a small beak-compatible joystick mounted just forward of [Pepper]’s perch. With this system, it’s possible for [Pepper] to follow [Andrew] through the house. [Andrew] wanted to make sure [Pepper] couldn’t drive into walls or table legs, so a suite of sensors on the front stops the buggy whenever an object is detected.

One very cool feature of the bird buggy is its ability to drive itself to a recharging station. It does this with the help of a webcam and OpenCV and a pair of markers just behind the charging port. When the Beagleboard on the buggy sees the green and yellow markers for the charging port align, it knows its directly in front of the charging port.

You can see [Pepper] driving his new whip around after the break, along with a very cool demo of the bird buggy docking with its charging port.

Continue reading “Bird Buggy Soothes A Screeching Parrot”

RC Car Transforms Into RC Robot

Transformer

After nearly 30 years since the first episode of Transformers aired, someone has finally done it. A company named Brave Robotics out of Japan has created a true transformer robot that is half remote control car and half remote control bipedal robot.

According to the Brave Robotics’ site, this creation is the result of more than 10 years. In 2002, the first version of the Transform Robot was completed – a relatively simple affair that transformed but couldn’t walk or drive. Over the last 10 years, the prototypes have seen incremental improvement that included a drive system for the wheels, a steering mechanism, and even the ability to move its’ arms and shoot plastic darts.

Surprisingly, you can actually buy one of Brave Robotics’ transforming robots for ¥1,980,000 JPY, or about $24,000 USD. A little pricy but we’re sure we’ll see a few more transforming robots in the future.

Check out a few more videos of the Brave Robotics transform robot after the break.

Continue reading “RC Car Transforms Into RC Robot”