The Hackaday Prize

1541 Articles

Hackaday Prize Entry: DIY Guitar Multieffects

August 8, 2015 by 14 Comments

Guitar effects and other musical circuits are a great introduction to electronics. There’s a reason for this: with audio circuits you’re dealing with analog signals and not just the ones and zeros of blinking a LED. Add in the DSP aspects of audio effects, and you have several classes of an EE degree wrapped up in one project.

For his Hackaday Prize entry, [randy.day] is building a guitar multieffect. Instead of just a single distortion, fuzz, or chorus circuit, this tiny little PCB is going to have several flavors of pitch shifting, a flanger, chorus, echo, harmony, and stranger ‘digital-ish’ effects like bitcrushing.

This effects unit is built around a PIC32 and a TI audio codec which processes the audio at 64k 32-bit samples/second. This takes care of all the audio processing, but the hard work for a guitar pedal is actually the enclosure and mechanicals – it’s a hard life for stage equipment. For the foot pedal input, [randy] is using a magnetic position sensor, but there’s no word if he’ll be using a fancy die-cast enclosure or a plastic injection molded unit.

The 2015 Hackaday Prize is sponsored by:

Nolan Bushnell And Hackaday On The Latest Episode Of The Tomorrow Show

August 7, 2015 by 6 Comments

Back in June when Hackaday attended LA Tech Day I met [Gray Bright]. He’s been a big fan of Hackaday for years and recently started producing and hosting The Tomorrow Show, a Late Night Talk Show focused on Science and Technology. [Gray] invited me on the show to talk about Hackaday and the 2015 Hackaday Prize.

[Gray’s] approach is to view scientists and engineers as the new rock stars. In each episode he invites some of the biggest names from the worlds of Science, Technology, Engineering, Art, and Mathematics (STEAM) and conducts a thought-provoking and entertaining interview. There’s a healthy dose of comedy from future correspondent [Ant Simpson] and [SupernoVanGirl], live musical performances, and it’s all filmed in front of a live studio audience.

Tomorrow Show -Nolan Bushnell StandUp

Filming the show in the Hollywood studio on a Friday night in July was a hoot. I was honored that our segment was on the same episode as the legendary engineer and entrepreneur [Nolan Bushnell], founder of Atari and Chuck E. Cheese’s‎. [Nolan] even did an impromptu standup set when there was a short technical delay.

You can watch the full episode (below the fold) to see antics from The Tomorrow Show team, [Nolan’s] anecdotes about the early days of Atari and being [Steve Jobs’] boss, as well as my first TV appearance spreading the word about the Hackaday Prize. It’s also hilarious to see [Nolan] hooked up via electrodes controlling [Gray] to play Brain Pong just like when we toured Backyard Brains last year.

Continue reading “Nolan Bushnell And Hackaday On The Latest Episode Of The Tomorrow Show” →

Hackaday Prize Entry: PICs And Arduinos, Cats And Dogs Living Together

August 6, 2015 by 11 Comments

Half of our little corner of the Internet complains about the Arduino, how the pin headers of the Arduino standard don’t make any sense, how the Arduino IDE is rubbish, gives well-reasoned arguments why the Arduino language is hindering the next generation of embedded programmers, and laments the fact that everything is commoditized into Arduino-compatible packages. The other half of our little corner of the Internet uses Microchip PICs.

[Jarrett] is stubborn, and he wants to use a PIC with the distinctive Arduino pin layout. Thus was born PIC-On-The-Go. It’s a PIC18F4520 in the familiar goofy-pin package, made specifically for everyone who just wants to buckle down and get some work done.

This isn’t the only PIC-become-Arduino board out there; the Fubarino is a great board that speaks Arduino, but that doesn’t take advantage of our favorite Arduino shields. Either way, we’re surprised something like [Jarrett]’s project doesn’t exist yet, making it a great entry for The Hackaday Prize.

The 2015 Hackaday Prize is sponsored by:

Hackaday Prize Entry: Detecting New Meteor Showers

August 5, 2015 by 5 Comments

Go out to a field on a dark night, far away from city lights, and you might just see a shooting star. A single meteor is just a tiny fraction of all the space dust that hits our atmosphere every day; most of it goes completely unnoticed. To get a better idea of where these meteoroids come from, [Dario] and [Denis] have come up with a network of meteor-detecting ground stations to search for these extraterrestrial visitors and make it possible to retrieve the largest of these fallen stars.

This project started at the Croatian Meteor Network, a team with about two dozen surveillance cameras pointed skyward as an unblinking eye, looking for meteoroids entering the Earth’s atmosphere over the Balkans and the Adriatic sea. When two cameras detect a meteor, the path it came from – and its orbit around the Sun – can be computed. The team has already found a possible new meteor shower (PDF) that is active from late August to the middle of September.

With hundreds of cameras scattered around the globe, it’s possible to triangulate the position of these meteors and their orbit around the Sun, just like what was done with the innumerable Russian dash cams after the Chelyabinsk meteor. It’s a great project, and also one that requires a lot of computer image processing – a favorite around these parts.

The 2015 Hackaday Prize is sponsored by:

Hackaday Prize Entry: 20,000 Weather Stations

August 4, 2015 by 17 Comments

Team Tahmo has a plan to put a network of 20,000 weather stations across sub-Saharan Africa. That’s an impressive goal, and already they have pilot stations in Senegal, Chad, Nigeria, Uganda, and South Africa. For their Hackaday Prize entry, they thought it would make sense to add more advanced sensors to their weather stations, and came up with GPS, lightning, and large scale soil moisture sensors.

The sensors already deployed have the usual complement of meteorological equipment – thermometers, anemometers, barometers, and rain gauges. These stations are connected to a school’s Internet connection where students can monitor the local weather patterns and upload the data. Team Tahmo is building a small add-on board for their Prize entry using an AS3935 Franklin Lightning sensor and a GPS module.

In the interests of rapid design cycles, the team is using off-the-shelf modules for the lightning detector and GPS module. They hit up the Hackaday Prize Collabratorium for some advice on PCB design and have everything pretty much nailed down thanks to a few helpful hackers.

It’s a great project for one of the most ambitious crowdsourced data gathering projects ever conceived, and something that would vastly improve weather predictions across the African continent. Even if their entry does just monitor lightning strikes, it’s still an admirable goal and one of the most useful projects for this year’s Hackaday Prize.

The 2015 Hackaday Prize is sponsored by:

Hackaday Prize Entry: Wearable Electrodermal Activity Monitor

August 3, 2015 by 1 Comment

Electrodermal activity, or galvanic skin response has a lot of practical applications. Everything from research into emotional states to significantly more off-the-wall applications like the E-meter use electrodermal activity. For his Hackaday Prize entry, [qquuiinn] is building a wearable biofeedback wristband that measures galvanic skin response that is perfect for treating anxiety or stress disorders by serving as a simple and convenient wearable device.

Detecting electrodermal activity has been within the capability of anyone with an ohmmeter for over a hundred years. [quin²] is doing something a little more complex than the most primitive modern means of measuring galvanic skin response and using a dual op-amp to sense the tiny changes in skin resistance. This data is fed into an ATMega328 which sends it out to a tiny LED display in the shape of an ‘x’.

Reading electrodermal activity is easy, but doing it reliably in a wearable device is not. There are issues with the skin contacts to work though, issues with the amplifier, and putting the whole thing in a convenient package. [qquuiinn] asked the community about these problems in group discussion on the hacker channel and got a lot of really good advice. That’s a great example of what a project on hackaday.io can do, and a great project for the Hackaday Prize.

The 2015 Hackaday Prize is sponsored by:

Hackaday Prize Entry: The Internet Of Plants

August 2, 2015 by 7 Comments

The theme of this year’s Hackaday Prize is ‘build something that matters.’ Acrobotic Industries is in beautiful Southern California, where it won’t rain an appreciable amount until the mudslides come. For a little bit of help during this unprecedented drought, they’ve created Clouden, a system of irrigation that only waters yards and parks when the plants need it. This is apparently a novel concept for Southern California, and is most certainly something that matters.

The Clouden system has two parts. The first is a node with an array of soil water sensors and a Particle WiFi module. This node connects to the controller which alters watering schedules in response to actual conditions and predicted rainfall from the WeatherUnderground API.

There’s more to just listening to sensors – the Clouden controller also has the hardware to control 24VAC water valves and a web interface for scheduling irrigation times. With this many sensors – and the ability to not water when there’s a ban in place – it’s a great watering system, and something Southern California desperately needs.

The 2015 Hackaday Prize is sponsored by: