Hacking Werkstatts And Other Workshops

November 13, 2014 by Brian Benchoff 3 Comments

We had a few very cool workshops at our party in Munich today, with Moog synths, robotic arms, Linksys routers splayed open on a table, and Club Mate flowing like water. We’re wrapping the workshops up right now and the kegs are being tapped. Before that, though, it might be a good idea to show off all the other Hackaday Prize projects that showed up today.

The M.A.R.S. Rover, a 3D-printed rocker-bogie robot showed up around noon. I didn’t see it driving around, but there will probably be video up later.

Also shown was the AutoCut robotic lawn mower. No blood was shed today.

[Mario] was cool enough to fly in and show off the OpenExposer, a laser resin printer that is heavily inspired by the RepRap project.

Pictures below.

Not-deadly lawnmower

3D Scanner and OpenExposer

If you’re wondering why we couldn’t get Internet at the workshops…

OP-1 synth with a Moog

Solarbotics

Moog hacking

MeArm

M.A.R.S. Rover

T Minus Several Hours Until The Hackaday Prize

November 13, 2014 by Brian Benchoff 4 Comments

We’re only a few hours away until we announce the winner of The Hackaday Prize. Until then, we have a huge workshop and party to put together. It’s only noon here in Munich, and we’ve been up since the crack of dawn putting stuff together.

The doors open in a little bit, but so far we have people putting together the workshops. [Ben Gray] from Phenoptix is busy putting together a few MeArm robots for a workshop. They take one person 45 minutes to put together. There’s kinda something resembling an assembly line going on:

[Ben Gray] @phenoptix working on a MeArm

Hackaday Prize judge [Sprite_TM] made it out to the workshop/party. He’s working on soldering up some Teensy 3.1s for the Moog workshop. There are a ton of parts for this, everything from extremely expensive slide pots to opamps, audio caps, pressure and pulse sensors, and a vintage wah pedal that also has +5v CV expression output. Really cool.

Since we’re announcing the winner of The Hackaday Prize, there was the question of what the trophy should be. Trophies are not utilitarian in any way, so we thought we would put our own spin on this. It’s a PanaVise, emblazoned with a 3D printed plaque.

Doors open in a few minutes. More updates to follow

Hackaday Prize Finalist: An Un-noodly Spectrometer

November 10, 2014 by Brian Benchoff 17 Comments

And so we come to the final finalist bio for The Hackaday Prize. In only three days, we’ll know whether [fl@C@]’s RamanPi Spectrometer or one of the four other projects to make it into the finals round will be making it to space, or only Japan.

There are a surprising number of spectrometer projects out there on the Intertubes, but most of these setups only measure the absorption spectrum – literally what wavelengths of light are absorbed by the material being measured. A Raman spectrometer is completely different, using a laser to illuminate the sample, and measuring the scattering of light from the material. It’s work that has won a Nobel prize, and [fl@C@] built one with a 3D printer.

Bio below, along with the final video that was sent around to the judges. If you’re wondering who the winner of The Hackaday Prize is, even I don’t know. [Mike] and a few Hackaday overlords do, but the rest of us will remain in ignorance until we announce the winner at the party we’re having in Munich next Thursday.

Continue reading “Hackaday Prize Finalist: An Un-noodly Spectrometer” →

Hackaday Prize Finalist: A Network Of Satellite Ground Stations

November 7, 2014 by Brian Benchoff 29 Comments

There are astonishing things you can do with a network of sensors spread across the globe, all connected to the Internet. Thousands of people have already installed hardware to detect lightning and flightaware gives out subscriptions to their premium service to anyone who will listen in to airplane transponders and send data back to their servers. The folks behind SatNOGS, one of the five finalists for The Hackaday Prize are using this same crowdsourced data collection for something that is literally out of this world: listening to the ever-increasing number of amateur satellites orbiting the planet.

There are dozens of cubesats and other amateur satellites flying every year, and they have become an extremely popular way of experimenting in a space environment, giving some budding engineers an awesome project in school, and testing out some technologies that are just too weird for national space agencies. The problem with sending one of these birds up is getting the data back down; a satellite will pass above the horizon of a single location only a few times a day, and even then for only minutes at a time. The SatNOGS team hopes to change that by planting receivers all around the globe, connecting them to the Internet, and hopefully providing real-time telemetry from dozens of orbiting satellites.

[Pierros] from the SatNOGS team was kind enough to sit down and answer a few questions for us about his entry to The Hackaday Prize. That’s below, right after their finalist video. Some of the SatNOGS team will also be at our Munich event where we announce the winner of the Prize.

Continue reading “Hackaday Prize Finalist: A Network Of Satellite Ground Stations” →

Hackaday Prize Finalist: A Portable SDR

November 5, 2014 by Brian Benchoff 74 Comments

No other project to make it to The Hackaday Prize has people throwing money at their computer screen hoping something would happen than [Michael Colton]’s PortableSDR. It’s a software defined radio designed for coverage up to 30MHz. Amateur radio operators across the world are interested in this project, going so far as to call this the first Baofeng UV-5R killer. That’s extremely high praise.

[Michael] was kind enough to sit down and answer a few questions about how his entry to The Hackaday Prize has gone. You can check that out below, along with the final round video of the project. Anyone who wants their own PortableSDR could really help [Michael] out by taking this survey.

Continue reading “Hackaday Prize Finalist: A Portable SDR” →

The Hackaday Prize: The Hacker Behind The First Tricorder

November 3, 2014 by Brian Benchoff 38 Comments

Smartphones are the most common expression of [Gene Roddneberry]’s dream of a small device packed with sensors, but so far, the suite of sensors in the latest and greatest smartphone are only used to tell Uber where to pick you up, or upload pics to an Instagram account. It’s not an ideal situation, but keep in mind the Federation of the 24th century was still transitioning to a post-scarcity economy; we still have about 400 years until angel investors, startups, and accelerators are rendered obsolete.

Until then, [Peter Jansen] has dedicated a few years of his life to making the Tricorder of the Star Trek universe a reality. It’s his entry for The Hackaday Prize, and made it to the finals selection, giving [Peter] a one in five chance of winning a trip to space.

[Peter]’s entry, the Open Source Science Tricorder or the Arducorder Mini, is loaded down with sensors. With the right software, it’s able to tell [Peter] the health of leaves, how good the shielding is on [Peter]’s CT scanner, push all the data to the web, and provide a way to sense just about anything happening in the environment. You can check out [Peter]’s video for The Hackaday Prize finals below, and an interview after that.

Continue reading “The Hackaday Prize: The Hacker Behind The First Tricorder” →

Hackaday Munich: DJ Muallem, Workshop Info, And More

October 30, 2014 by Mike Szczys 4 Comments

DJ Muallem

If you don’t have your ticket to the Hackaday Prize Party at Hackaday Munich you better scramble for one. We are excited to announce that [muallem] is the DJ for the event. He is the driving force behind the music at the Bob Beaman Club in Munich and is sure to deliver a set to remember. Don’t take our word for it, we’ve been cranking his Soundcloud channel for a couple of days now and it’s hard to wait the two weeks left before the party starts.

Workshop details whether you have a ticket or not

For those able to show up during the afternoon we have started to post details about the workshops. One point of confusion has been the All-day tickets versus the Workshop tickets. Here’s a rundown:

Workshop tickets were limited based on the hardware we are able to bring to the event with us.
All day tickets are welcome to participate in the workshops if you bring your own hardware to hack. Of course you are also welcome to come and watch, visit, or work on a completely separate hardware hack of your own!

If you have a ticket you’ll want to check out the details about getting a head start (by pre-loading embedded development software and learning a bit about the challenges). If you don’t have a workshop ticket we’re recommending hardware you can bring in order to participate.

So far we’ve posted about the Roboto and Moog workshops but will add details about Reverse Engineering and Computer Vision workshops soon!

The Hackaday Prize: Space Trip or Cash?

There has been a brewing debate about whether the winner of The Hackaday Prize (who will be revealed live at Hackaday Munich) will take the Trip to Space or grab the $196,418 in cash. Tell us which what you would do and why.