A Bright Way To Cycle

[youtube=http://www.youtube.com/watch?v=FQrNmnU8kJk]

Want to be visible when cycling at night? [Neon Dean] came up with this possible solution, which he cruised on at Nuit Blanche. Its a bicycle with neon lights mounted on every surface possible. [Dean], who gave a similar treatment to his car, explained how it worked. All of the tubes take their power from a 12VDC battery he carries in a fanny pack. 12V is a far too low voltage to power the tubes, so a step up transformer is used to bring that number way up. [Dean] also decided to install a neon tube on each wheel. In order to deliver power to them, he mounted a rotor on each wheel, with two conductive tracks running close to the edge of each rotor. Two strips of steel act as brushes (in a manner similar to those on slot cars), and deliver the stepped-up power to the tubes. One creative, but perhaps not so bright, idea is [Dean]’s neon tube helmet.

NeonDeanBrushes12Vfanny transformer copy

Vintage Video: Computing Across America

roberts

in 1983, [Steve Roberts] packed up a Tandy 100 laptop and a 5-watt solar panel, fleeing suburbia on his recumbent bicycle on what would become a 17,000 mile journey that forever cemented his place in the geek pantheon…not just as a technology hacker, but as one of the preeminent “life hackers,” pursuing his own dreams on his own terms and inspiring others to do the same.

In this 1989 video, recently unearthed by Hack a Day, [Roberts] reflects on the first 16,000 miles of his voyage, detailing some of the technology that went into his then-current ride, the Winnebiko II.

Continue reading “Vintage Video: Computing Across America”

Zelo, The Improbable Wooden Trike

The earliest bicycles were made from wood. Nearly two centuries later, some garage tinkerers still turn to this most traditional of materials for their own creations, since welding one requires experience and tools beyond the reach of many. Resembling Gilligan’s Island props, the resulting bikes are both artistic and great fun, but not very practical for real use; often heavy, ill-fitting or lacking durability.

[Boris Beaulant’s] birch laminate Zelo, on the other hand, has cleaner lines than anything you’d see in an IKEA showroom. Not content with an ordinary two-wheeler, he’s tackled a three-wheeled recumbent trike, which requires even finer tolerances. Two months and over 1,300 miles later, the trike is still rolling strong through the French countryside, proving its mettle as legitimate transportation and not just a garage novelty. [Beaulant’s] build log (Google translation here) offers some insights into the development of this masterpiece, starting with prior woodworking projects (furniture, rolling toys and a children’s bike) and finding clever solutions to problems such as creating a mold of his own back for a custom-contoured seat.

E-bike Across Canada For $10

Justin Lemire-Elmore E-bike

[Justin Lemire-Elmore] spent one month riding his electric bike across Canada last summer. He made the journey from Vancouver to Halifax in 30 days using a mere $10 worth of electricity to recharge his bike. He put together a rather bizarre looking semi-recumbent bicycle to hold all of his gear. The motor controller, charge controller, battery packs, and lighting system were all his own design. He has a captivating 2 hour presentation embedded below in which he describes all the problems he had with his equipment during the trip as well as all the great experiences the journey offered. Continue reading “E-bike Across Canada For $10”

Chainsaw Powered Bicycle

chainsawbike

We’ve covered weed whacker bicycles before and you can even buy 66cc conversion kits now. [geoff390] posted a few videos over on YouTube about another motor option. In the first video embedded below, he goes over the basic parts of his bike. The chainsaw motor is mounted to the side of the back tire and a metal drive wheel extending from the chainsaw shaft makes contact with it. The motor assembly is mounted on a hinge and the friction between the drive wheel and the back tire is adjusted with a turnbuckle. He posted a more detailed second video in which he goes over some of the finer details of the bike and some of the issues he’s had. Continue reading “Chainsaw Powered Bicycle”

RGBike POV

rgbike_pov

[Hazard] wanted a full color POV display for his bike wheel. Adafruit’s SpokePOV is single color and Monkeylectric’s original version didn’t display images. He also balked at the cost and decided to manufacture his own version. It uses 16 RGB LEDs on a single layer board he manufactured himself. It’s an entirely through-hole design to make assembly easy. It uses a hall effect sensor to synchronize the image display. The two main components are an ATmega328p microcontroller, which should make it Arduino compatible, and a TLC5940 PWM LED driver. It’s a very well documented build and certainly a good looking effect.

[via adafruit]

CrossCanada: A Biking Documentary

bike_arm

[Mike] was going to be biking across Canada. He really wanted to document the trip, so he began planning ways to get still images taken at intervals along the way. After a bit of brainstorming, he ended up setting his goals a bit higher. He was going to film the entire trip. He really didn’t want a simple helmet cam, he wanted himself and the entire bike in the frame. To do this he had to build a long arm on which he mounted a bullet cam. On his handlebars, he has a simple control where he can turn the system on and off as well as initiate recording.

No single piece of this project was too complicated, but taken all together, the final result is quite nice. You can watch the video for yourself after the break.

Continue reading “CrossCanada: A Biking Documentary”