A Pair Of N64 Portables

portables

Casemodding has moved far beyond the old portabalized Ataris and NESes of only a few years ago. Now, the new hotness is more modern consoles including the GameCube, Dreamcast, and the venerable N64. Two N64 case mods rolled into our tip line over the past few days, and we can’t think of a better display of case fabrication and console modification than these two.

First up is [Travis]’s N64 handheld. The case was constructed out of a sheet of ABS plastic with Bondo used to make everything sleek and smooth. There’s a 7″ display in this handheld as well as two LiIon batteries able to provide up to three hours of play time. The fit and finish on this build is spectacular, a testament to [Travis]’ patience and Bondo skills.

Next up is a very very tiny build claiming to be the smallest N64 portable. It’s the work of [bud] and is barely larger than an N64 cartridge. Inside is a 3.5 inch screen and enough LiPos to provide about 2 hours of gaming time. Unlike other (larger) builds, [bud] put the cartridge slot on the outside of the case allowing the cartridge to stick out at a 90 degree angle.

Both very awesome builds that really show off what can be done with a lot of sanding and body filler. You can check out the videos for each casemod after the break.

Continue reading “A Pair Of N64 Portables”

IMac Reborn With Present-day Parts

[Paul] spent his summer bringing an iMac G3 into this decade. There’s plenty of room to work with since he removed the CRT which originally occupied most of the computer’s space. The final project is much more powerful and since he preserved most of the metal mounting parts inside it remains quite strong.

He started by swapping flat screen monitors with his Grandma (who incidentally runs Linux… nice!). She had a 15″ model which would fit nicely in the case so he upgraded her to 17″ and took the old one. With bezel removed it fits perfectly where to old tube had been. Next comes the power supply. It’s mounted on the bracket which held the back of the tube, with a bit of metal removed to clear the air intake. To mount the motherboard he fabricated a bracket at one end where the iMac’s stage drops away. In retrospect he wishes he had rotated the board to make the I/O panel more accessible. The hard drive mounts on the original carriage, and he did some creative gluing to make his replacement DVD drive align with the original optical drive opening. The finished product looks great from the front and sides, with the cables running out the back as the only indication that it’s had some major work done on it.

N64 Controller Mod Means Playing Games Akimbo

Star Wars Episode 1 Racer for the Nintendo 64 has a rather interesting feature: by entering the code RRDUAL on the cheats menu, it’s possible to plug two controllers into the console and control each engine independently. This gives the game an awesome arcade feel, but dual-wielding N64 controllers is a bit of a burden. [Clarky] thought it would be a good idea to combine two controllers into one, and the Star Wars Racer controller is the result.

Like most console mods, the build began by tearing apart two N64 controllers and gluing them together. With a ton of bondo, sanding, and fiberglass, [Clarky] had a mutated N64 controller perfect for the Episode 1 game.

[Clarky] will be updating the build with a built-in rumble pak, but for now he’s doing his best to learn how to fly a pod racer with both hands. You can check out the demo of his build after the break where he plays the Star Wars game as well as a round of Goldeneye using his akimbo controller.

Continue reading “N64 Controller Mod Means Playing Games Akimbo”

Hackaday Links: January 16, 2012

Finally the 13-year-old on Battlefield 3 will get their comeuppance

[Shawn] sent in his fully adjustable auto-fire mod for an XBox360 controller. It’s pretty simple – just an ATtiny85 soldered to a button with a pot to adjust the rate and switch to turn it on and off. It could have been done with a 555, but this is good enough.

Now one for the PS3 bronies

[Capt-Nemo] loves and tolerates everyone so he modded his 60 Gig PS3 with a bunch of LEDs to display Rainbow Dash’s cutie mark. Yes, it’s from My Little Pony. Don’t judge us. Watch the demo video instead.

How do you organize resistors?

A while ago we saw a neat way to store resistors in a piece of foam with a grid according to the first and third color bands. [Greg] did it another way that just puts a label on a piece of foam. Can you think of a better way?

It’s not a synthesizer, but is it fake?

A lot of people have been sending in this video of [Stephen] turning his kitchen into a synthesizer. We’re thinking he turned a bunch of bowls and cans into an MPC / MIDI controller at best, or it was all done in post. We’ll let our readers duke it out in the comments.

Blinky things spinning very fast

A gracious Hack a Day reader sent in a mechanical television demo he found during late night intertube browsing. We know it’s from a 1992 episode of Computer Club that aired in Germany. It’s four rotating bars of 232 LEDs that will display a standard TV signal. We think it might be time for an RGB LED version of this. Any takers?

Adorable And Small Portable NES

The Queen of Bondo is back again, this time with an adorably small NES portable, the HandyNES.

When last saw [lovablechevy], she had just finished up her build of a Nintenduo, a build that stuffed an NES and SNES into a single box. The Nintenduo was such a clean build it would be a crime to let her talents go to waste, so [Lovablechevy] finished up one of the smallest NES portables we’ve seen.

The build is based on a top-loading NES with a 3.5″ screen. [rekarp]’s NES2 composite mod was used to get the NES and screen working together. Two LiIon batteries provide 3 hours of play time (with a low battery indicator, natch).

[lovablechevy] also included an AV out so she can connect her HandyNES to a larger CRT screen. Like our old Sega Nomad, this allows for a little two-player action – player one using the HandyNES and player two using an extra controller. Support for the Zapper was also included after modding the Zapper connection to a USB port.

Check out the video walkthrough after the break. To prove that her build isn’t a clone, [lovablechevy] also include a video of herself playing Battletoads past the point where the clones crash. Excellent work from the Queen of Bondo.

Continue reading “Adorable And Small Portable NES”

Converting A Laptop Computer Into A Desktop Machine

[Michael Chen] found himself in possession of a thoroughly broken laptop. The hinges connecting the screen to the body of the computer were shot, and the battery was non-functional. After a bit of thinking he decided that it wouldn’t take much to resurrect the hardware by turning it into a desktop machine.

At the core of this hack is the hardware that you must keep for the computer to function. That is, the LCD screen, the motherboard, hard drive, and the AC/DC brick that powers it. [Michael] ditched everything else; the case, keyboard, trackpad, webcam, etc. Next he started building his own enclsure out of acrylic. First he sandwiched the LCD screen between a full sheet of acrylic and a bezel that was one inch wide on each side. Next, another full sheet was used to mount the motherboard and hard drive. You can see how the three sheets are connected by nuts and bolts in the image above. It looks like the only other alteration he made was to relocate the power button to a more convenient spot.

Once a USB keyboard and mouse are added he’s back up and running. We’ve got our eye on an old XP laptop that might end up seeing this conversion to become a dedicated shop computer. We just need to build in some more dust protection.

Creepy HDD Activity Lights Just In Time For Halloween

We almost skimmed right past this spooky HDD activity light thinking it was just another set of LEDs wired to the motherboard.  However, they explained right off that they didn’t want just another blinking light on their case. They wanted it to change its intensity smoothly based on hard drive activity. While there are a million ways this could have been over engineered, we think they did a pretty good job of simplifying the circuit. The bill of materials is pretty much just a handful of resistors, LEDs, an opto isolator, and a capacitor. The effect, is quite nice and can be seen in the video after the break.

Continue reading “Creepy HDD Activity Lights Just In Time For Halloween”