LED Illuminated Isomorphic Keyboard Looks As Good As It Sounds

October 5, 2012 by Brian Benchoff 15 Comments

Unlike the traditional ebony and ivory found on pianos, isomorphic keyboards arrange buttons on a grid. This makes every chord the same shape, and to transpose a piece it’s simply a matter of moving your fingers a few places to the left or right. [Brett Park] sent in an isomorphic keyboard he built loaded up with LEDs, and we’re thinking it the perfect instrument for musicians looking to move up from playing their MacBook.

The body of [Brett]’s keyboard is made out of a sheet of acrylic. After drilling 64 holes for each of the clear arcade buttons, [Brett] bent the sides of his hexagonal keyboard into a very sturdy-looking enclosure.

On the hardware side, [Brett] used a 64 button Arduino shield and a Sparkfun MIDI shield. The RGB LEDs behind each button are controlled via MIDI sysex messages generated outside the instrument, making it perfect for a little bit of visual feedback from whatever soft synth you desire.

In the videos after the break, you can check out the light patterns in action along with one of [Brett]’s improvs. Notice how all the chords are the same shape, and changing the key only requires [Brett] to move his hands slightly to the side.

Continue reading “LED Illuminated Isomorphic Keyboard Looks As Good As It Sounds” →

Making Music With Tennis Balls And Lego

August 5, 2012 by Eric Evenchick 10 Comments

We’ve seen a lot of interesting MIDI controllers, but this one uses some unconventional materials. The World’s Coolest Keystroke, built by [Audiobody], is made from a combination of tennis balls, Lego bricks, servos, and switches.

When a tennis ball is lifted up, a Lego arm is actuated. It looks like a servo is used to move the Lego arm so it hits a switch. An Arduino is used to detect this and send a message to their computer.

They use the device to control Ableton Live and play different clips depending on which tennis ball was removed. It’s an interesting way to control sound with a tactile interface, and it looks pretty nifty.

After the break is a short video of the device in action, but [Audiobody] says that they will be releasing more information soon. We’re looking forward to seeing other interesting controllers that they have in the works.

[Via Make]

Continue reading “Making Music With Tennis Balls And Lego” →

Two Hard Disks And One DJ Get Down With No Delay

July 29, 2012 by Brian Benchoff 15 Comments

Mixmaster [robelix] built a MIDI controller for DJs that uses two hard drives for scratching and cutting some wicked beats.

[robelix]’s project is called Hard DJ and was inspired by this earlier build capable of producing a droning appreciated chiptune music using the motor inside a hard drive. Instead of reading the out of phase sine waves produced when a hard drive platter is manually rotated, [robelix] used custom laser cut encoder wheels and an IR detector from old computer mice. This gives [robelix] far more resolution than would be possible by reading the drives stepper motors and allows him to scratch and cut to whatever his MC desires.

The electronics portion of the build are a little rough at this stage – just an Arduino Mega, a few buttons, and a trio of faders. [robelix] will be building a proper enclosure for his controller soon, something we can’t wait to see.

If you’d like to clone this DJ controller, all the files are up on the Git. Check out the video after the break.

Continue reading “Two Hard Disks And One DJ Get Down With No Delay” →

Isomorphic Piano Keyboard Is Button Madness

March 19, 2012 by Brian Benchoff 15 Comments

[nikescar] sent in a link to a huge isomorphic MIDI keyboard. We might have missed it the first time around, but that doesn’t diminish such a great looking project.

According to the project page, this humongous keyboard is the work people at Louisville Soundbuilders’ efforts to clone the AXiS-64 MIDI controller. Instead of looking like a ‘normal’ piano keyboard, this isomorphic keyboard puts notes in a hexagonal pattern. This keyboard layout is very useful – fingerings for chords are the same across all keys – but these keyboard layouts are fairly rare and MIDI controllers are expensive as a result.

To make the keyboard in the video velocity sensitive, there are two layers of PCBs. The top layer uses Cherry key switches, while the bottom PCB is an array of tact switches. Measuring the time between the top and bottom key presses gives the on board microcontroller velocity information that is converted to MIDI notes. This setup has a few downsides, namely the huge amount of switches, components, and pins needed for two keyboard matrices.

The project page hasn’t been updated for a few months, so we’re pretty curious about the current status of this build. If any of the Louisville Soundbuilders have an update on this project, send it on in.

Fully Fretted Guitar MIDI Controller

September 29, 2011 by Mike Szczys 3 Comments

[Andy] came across this guitar midi controller project from way back and decided to send us a tip about it. The English version, translated from the original Russian, is easy to follow and documents the build process from first prototypes to the version you see above. It can connect via a standard MIDI cable and then be used to control anything you want. The only thing missing is the ability to transmit velocity data, but that’s certainly not a deal breaker.

The device has two sensory parts. The first is a set of pickups that can be seen underneath the strings near the bridge. These work like standard magnetic pickups but instead of extrapolating fret data from the pitch picked up on the string, there is a second sensor mechanism for every fret of each string. Since the strings are made of metal, it’s possible to detect which fret is depressed based on continuity sensing. Of course this means you need a conductor between every fret, and that’s why the fingerboard has been replaced with one made of printed circuit boards. All of this data is gathered, then sent to the MIDI device via a PIC 16F74 microcontroller.

If this leaves you wanting for more guitar hacks, don’t miss this one that adds addressable LEDs in between each fret.

Turn Any Bluetooth Device Into A MIDI Controller

July 9, 2011 by Mike Szczys 11 Comments

[Peter Brinkman] is working on a circuit that makes it easy to interface MIDI and Bluetooth devices. His target hardware has been a MIDI compatible keyboard and an Android phone. He was inspired to tip us off about the project after reading about yesterday’s Bluescripts project.

We’ve embedded two demo videos after the break. They show [Peter] first using this hardware to receive MIDI signals from a keyboard on his Android phone, and then he demonstrates using the phone and an on-screen musical keyboard to transmit data back to a MIDI device which generates the intended sounds.

It’s an interesting project and he’s headed down the kit-production path right now. You’ll want to browse all of his recent posts, but we especially liked reading his thoughts about simplifying the circuitry. He originally had two separate voltages running in the circuit with a level converter for data signals. After some re-conceptualization he ditched several components and improved the functionality a bit.

Continue reading “Turn Any Bluetooth Device Into A MIDI Controller” →

Instruments As Games – Games As Instruments

November 13, 2009 by Mike Szczys 13 Comments

instruments-as-games

Here’s a pair of diametrically opposed hacks. One makes use of a real instrument to play Rock Band, the other makes use of a game controller to play real music.

[Tim] lets us know that his friend figured out how to play Rock Band 2 on expert level by playing flute instead of singing. Of course this works because the game is just looking for the correct frequency for scoring. It makes sense that the vocal lines can be offset by an octave and still register correctly. We wouldn’t have thought of this ourselves but now that we’ve seen her success, we will try it (our instrumental skills far out pace our singing talents).

Seeing this sparks a correlation with Phone Phreaking, which started with a blind kid singing a tone into the receiver to make the remainder of his long distance call free. This was followed by Blue Boxes that allowed people without perfect pitch to play the tones electronically. It would be interesting to see what could have been done with a talented flute player (like the beat-boxing flutist) and one of those old phone networks.

On the other side of the coin, we have [Jordan’s] project in which she creates midi controllers using Wii drums from Guitar Hero World Tour and Rock Band. The Guitar Hero drums are velocity sensitive, a feature she’s using in her setup. The MIDI data takes into account how hard the drums are struck and the resulting sound reflects that. This particular writeup outlines her use of Osculator for the velocity sensitive system, but you can also check out the tutorial she wrote covering the use of JunXion with the Rock Band controller that we covered in the past.

Video for both of these control schemes is included after the page break. We love to see people break the guise of “I’m creating music by playing a video game” and actually use their musical talents in a new and interesting way.

Continue reading “Instruments As Games – Games As Instruments” →