Shower Occupancy Sensor Keeps Peace/Eliminates Odor At The Office

January 2, 2015 by Mike Szczys 20 Comments

When the first two prototype ingredients listed are paperclips and Post-it notes you know it’s going to be good. The problem: one shower stall at work with numerous co-workers who bike to the office. The solution: a occupancy monitor that is smart enough to know that someone is actually in the room. You know what we’re talking about, a sensor that knows more than whether the door is open or closed. [James] got wise and built a sensor to monitor whether the door is bolted or not. We think this method is far superior to motion-based systems.

This uber-smart sensor is simply a pair of paperclips anchored on a rolled Post-it note substrate and shoved in the receiver on the door jamb. When the bolt is locked from the inside it pushes the paperclips together completing the simple circuit. This is monitored by a Spark Core but will work with just about any monitoring system you can devise. What we’re trying to figure out is how to ruggedize the paper-clip hack which we can’t think will perform well for very long. It looks like there’s room to bore out a bit more inside the receiver hole. Perhaps leaf switch with a 3D printed mounting bracket?

Oh, and kudos on the Ikea food storage container for the enclosure. That’s one of our favorite tricks for hacks which are installed for the long-run.

Homemade Hot Water Shower Might Shock You

August 25, 2014 by James Hobson 68 Comments

DIY Hot Water Shower

[Stephen] doesn’t have the luxury of readily available hot water in his apartment, and since he’s just renting he didn’t want to buy one of those instant powered units, so he decided to go ahead and build his own!

He’s using a submersible 1000W immersion heater in a 2.5 gallon water container which has been mounted high up in his bathroom to let gravity do the work for actual shower. It’s not quite an instant shower unit as the water needs to heat up like a kettle before being used — this takes about 4 minutes to hit the optimum temperature.

The current shower head installed drains the tank in about 2.5 minutes, which might not seem like much time for a shower, but let’s be honest — we could all probably cut back our shower time and save some water for the environment! Something one of our Hack a Day Prize entries is hoping to solve through music!

Continue reading “Homemade Hot Water Shower Might Shock You” →

Build A Waterproof Music Controller On The Cheap

June 24, 2013 by Mike Szczys 8 Comments

shower-controller-for-music-playback

[Aaron] wrote in to show off the waterproof music controller (translated) he just finished building. He uses it in the shower — which makes us wonder how long he’s spending in there. We could also see it being useful by the pool, on the beach, or anywhere else that you need a cheap and easy control system.

His computer plays tunes while he’s getting ready for the day. This means he was able to use an inexpensive wireless keyboard for control. The donor keyboard has dedicated music control keys which he carefully traced to the PCB before removing the flexible sheets that detect key presses. Next he found a water tight food container and sized his protoboard to fit. You can see his button layout above. Holes were cut in the lid of the container, with a plastic membrane glued on the underside. This will keep the water out while still allowing him to actuate the momentary push switches.

Most mobile devices will work with wireless keyboards. If your car is nearby just hook your phone to the stereo and control it with this rather than building a dedicated beach stereo system.

Magnets Keep The Shower Curtain From Groping You

December 25, 2012 by Mike Szczys 94 Comments

stop-shower-curtain-groping

We guess we’re glad to hear that other also suffer from the phantom shower curtain liner. On occasion the shower curtain will start closing in on us around the bottom of the shower. We’re not certain of the phenomenon that causes it. Perhaps it’s static electricity like when a comb repels a stream of water. It could be an issue with rising air though… who know. But [Sk84life0129] has had enough of it. He figured out a magnet-based solution to stop the shower curtain from groping him.

You can buy curtain liners that have magnets in the bottom of them to help prevent this. But this is an acrylic tub — not one that’s porcelain-coated cast iron like they used to be — so that’s not going to do any good. Instead, a pair of magnets from an old hard drive were glued to the shower surround. A couple of galvanized bolts had their heads sawn off, and were sewn into pockets in the shower curtain. These hold it taught while you scrub your body, preventing it from reaching out for a close encounter.

[via Reddit]

Liquid Tree

November 11, 2008 by Kimberly Lau 22 Comments

Liquid Tree is decorative, functional, and green. It’s a liquid feedback display created by [Jia Yi Lin] that is designed to tell you exactly how much water you’re wasting in the shower. Behind the pretty tubes is some interesting hardware. [Lin] used an Arduino board, and based her code off the Unipolar Stepper example. She’s posted her own code and wiring for the project. When hot water is turned on, the motors decrease the amount of liquid in the tubes. This causes the pattern to slowly disappear, indicating water consumed.

[via NOTCOT]