sid

21 Articles

Propeller Turned Into Chiptune Player With A Software SID

August 31, 2012 by 10 Comments

If there wasn’t reason enough to love the Parallax Propeller, now you can listen to chiptunes with your own pocket SID audio player.

This chiptune audio player uses the very unusual and very cool eight-core Parallax Propeller microcontroller. After soldering a few caps and resistors to a Propeller dev board to allow for audio out, the only thing necessary to play SID music files is a bit of code and an SD card breakout.

The key piece of code for this build would be the SIDcog object written by [Johannes Ahlebrand] this piece of code turns one of the eight cores in the Propeller into a virtual version of the classic Commodore 64 sound chip.

Since the SIDcog object only takes up one core on the eight core Propeller, it could be possible to turn this SID player into an all-inclusive chiptune audio source; the addition of an Atari POKEY or FM synthesis cog would allow for just about any conceivable chiptune sound to be carried around in a pocket.

No Hackaday post about chiptunes or SIDs would be complete without an audio demo, so you can check out the Propeller-powered SID after the break.

Continue reading “Propeller Turned Into Chiptune Player With A Software SID” →

[Jeri Ellsworth] On Making Her C64 Bass Keytar

July 9, 2012 by 27 Comments

[Jeri Ellsworth] finally set aside some time to talk about the build process for her Commodore 64 bass keytar. We think what started by taking a band saw to the guitar body ended up as a fantastic new instrument.

When she was showing off the project at Maker Faire we really only got a cursory look at what it could do. Her most recent video covers all that went into pulling off the project. Once the bulk of the guitar body was gone she tore the guts out of a dead c64 in order to mate the case with the guitar neck. Always the craftsman, she altered the computer’s badge to preserve the iconic look, then went to work adding pickups to each string using piezo sensors. This was done with Maker Faire in mind because magnetic pickups would have been unreliable around all of the tesla coils one might find at the event. These were amplified and filtered before being processed via an FPGA which connects to the original c64 SID 6581 chip.

Continue reading “[Jeri Ellsworth] On Making Her C64 Bass Keytar” →

Putting Every Chiptune Ever In An FPGA

June 7, 2012 by 21 Comments

Finally one device combines the power of the Commodore 64 SID, Atari ST YM2149, and Amiga MOD audio into one awesome box. It’s called the RetroCade Synth, and there’s a Kickstarter that is perfect for starting your chiptune composing journey.

[Jack]’s RetroCade synth is connects directly to the Papilio One 500k FPGA. All the classic chiptune ICs can be emulated in this FPGA including the Commodore 64 SID chip, and an Amiga MOD player. Being a follow-up to [Jack]’s previous FPGA YM2149 project, he also threw that chip into the project for good measure. While the RetroCade doesn’t ship with every old chiptune IC – there isn’t support for NES, Atari, GameBoy, or SN76489-based chiptunes yet – that is something [Jack] will add once the Kickstarter is completed.

After the break you can see [Jack] jamming out on his RetroCade project playing a YM2149, SID, and Amiga MOD sounds simultaneously. For $100, it’s comparable to the venerable MIDIbox SID, but also allows anyone to play whatever genre of chiptunes they desire.

Continue reading “Putting Every Chiptune Ever In An FPGA” →

Followup: Portable SID Player Is Now PC Output

July 20, 2011 by 9 Comments

When we first covered [Markus]’ portable SID player we starting dreaming about an alternative universe circa 1987 that included a pocket-sized music player called the Commodore ePod. [Markus]’ updated firmware that connects his SID player to a PC will have to do for now, we suppose.

Continue reading “Followup: Portable SID Player Is Now PC Output” →

Portable SID Plays Chiptunes

June 3, 2011 by 19 Comments

[Markus] on the DangerousPrototypes forum came up with a great little SID player.

The SID was (is?) the awesome sound generation chip inside the Commodore 64, and along with Game Boys and NESs laid the foundation for the chiptune scene. We’re happy to finally see a small SID player that doesn’t resort to SID emulation or a relatively huge MIDIbox.

The SID player itself is a shield on a CUI32 PIC dev board. The PIC32 emulates the 6510 and 6526 CPU and CIA chips found in the Commodore 64. A small USB memory stick stores the High Voltage SID Collection and the file system is navigated with an OLED screen. [Markus] says that the player draws 370 mA, so he runs it off a small wall wart. Still, we’re wondering if it’s possible to run this off of an SD card with a SwinSID so power draw can be reduced and a fully portable SID player can be realized.

We’ve got a touch of nostalgia for chiptune and demoscene music right now, so we’re going to listen to some [Nelly Furtado] [Janne Suni] right now, but you can check out the video demo [Markus] posted after the break.
Continue reading “Portable SID Plays Chiptunes” →

Jamin’ To Bach, Commodore 64 Style

October 13, 2009 by 25 Comments

[youtube=http://www.youtube.com/watch?v=MOhzkWZHBfM]

[thrashbarg] missed the sounds of the Commodore 64 and longed to hear the great masters in 8-bit glory. To get his fix, he created a midi device using the original Sound Interface Device from those long-dead systems. He’s interfaced the MOS6581 SID with an Atmel AVR ATmega8 microcontroller. The receiving pin for the AVR’s UART is used as a MIDI-IN connection, with the microcontroller converting midi data into the proper sound generation specs for the SID. The result is the 10 minutes of [Bach]’s Brandenburg Concerto heard in the embedded video above.

We have no idea where he picked up this obsolete chip, but if you want to give this a try, perhaps you’ll have some luck emulating the MOS6581 by using another ATmega8.