Scoreboard From Scratch

July 30, 2010 by Mike Szczys 22 Comments

[Kenneth] built this scoreboard for use at a ballpark that lacks such luxuries. We think this a phenomenal application for his skill and his pocketbook. He laid out PCBs for each digit in Eagle and etched them himself, then installed the indicators for home score, visitor score, inning, balls, strikes, and outs in a laser cut case. A pretty beefy battery along with the folding stand make this quite portable.

In the demo video after the break he’s connected to the scoreboard via telnet to update the score. This trick is accomplished using SparkFun’s WiFly GSX breakout board to set up an adhoc wireless network. The goal is to write an iPhone app that will be used to control the board in the field (or the outfield as it were).

This could definitely be used for different types of scoring during the off season.

Continue reading “Scoreboard From Scratch” →

Building A Better Water Rocket Launchpad

July 30, 2010 by Mike Szczys 13 Comments

School will be starting again in a few weeks but it’s not too late to enjoy a little time with your kids. This water rocket launcher lets you do just that. Built using the frame from an old grill, a soda bottle takes its place on the upturned PVC pipe. There’s a connection for your garden hose that allows you to inject water into the bottle. From there, a compressor connection pressurizes the bottle in preparation for launch. Watch it happen in the video after the break. That bottle could use some fins and a nose cone but there’s no denying the delight the kids are enjoying when they chase after the downed craft.

If you’ve already got a compressor and some empty 2-liter bottles you might also pick up some extra PVC to make this pressurized water cannon.

Elegant Wearable Computer

July 30, 2010 by Jakob Griffith 50 Comments

[Jason Statham] [Martin Magnusson] wrote in to tell us about his adventure in building a wearable computer. The device in its current state is a Beagleboard running Angstrom Linux tethered to an iPhone for internet. A bluetooth keyboard allows for input, while output is displayed on monocle-ized Myvu. And last but not least, the entire setup is powered by 4 AA batteries for 3 hours of life.

Its not as small as some of the wearable computers we’ve seen before, but if you wanted to whip out your own it sure takes a lot less soldering.

DIY Picture Frame Better Than Store Bought

July 30, 2010 by Mike Szczys 22 Comments

[Daniel’s] homemade digital picture frame looks great, it’s well-built, and it has a nice set of features. It’s not made from a broken laptop and he didn’t build it around a microcontroller. Instead, he saved a 19″ LCD monitor with a burnt out back light caused by the extremely common blown capacitor problem. Twenty dollars on eBay landed him a small industrial single board computer to drive the system.

The software end of things is a curious conglomeration but considering the hardware constraints [Daniel] made some great choices. He’s using MS-DOS along with LxPic for slide shows and Mplayer for video. The rest of the software gets him up on the home network and enables IR remote control via LIRC. All o this makes for a beautiful product (video after the break includes some Doom footage) and the package is pulling just 40W when in use.

Tethering The Samsung Vibrant Without Rooting

July 30, 2010 by Mike Szczys 12 Comments

If you’ve got a Samsung Vibrant and want to take advantage of that unlimted 3G account you can tether without rooting the phone. This method uses a USB cable to provide internet access to Windows XP and Windows 7 computers. Samsung’s own Kies software handles the tethering, as long as you have the magic number to get connected on T-Mobile USA networks; ‘epc.tmobile.com’ for the APN name and ‘*99#’ as the phone number. [Zedomax] made the video after the break which takes you through the tethering ritual.

Continue reading “Tethering The Samsung Vibrant Without Rooting” →

2010 Ninja Party Badge

July 30, 2010 by Mike Szczys 19 Comments

Wired took a look at this year’s Ninja Party badges. We were giddy about all the goodies involved in last year’s must-have badge that served as an invitation to the party. It was tailor-made for hacking, including an on-board disassembler. This year’s details are still a bit sparse but the offering is more along the lines of a market-ready product. The badges come in hand held gaming format, with a d-pad and two buttons. They can connect wirelessly with each other and with hidden base stations, allowing participants to fight in the digital realm for LED-indicated achievements. The teaser is tantalizing and we can’t wait to hear details about the real/digital gaming adventure soon to unfold.