Month: April 2012

Hackaday Links: April 20, 2012

April 20, 2012 by 20 Comments

Introducing Hackaday: how it’s made edition

Ever wonder how the make the forms for marine propellers? Now you have. It turns out they use a bunch of plywood, Bondo, and sandpaper. Awesome viewing for a coffee break.

Finally a new way to hurt yourself!

[Darrell]’s solder flux pen was filled and capped at sea level. When this pen made it to his work bench high in the mountains of Colorado there was a significant amount of pressure in that pen. The flux squirted out right into [Darrell]’s eye. Better get some Visine on that, man.

The most accurate television portrayal of hacking ever

[Russell] was watching TV last night and saw an interesting commercial. It’s a bunch of electronic components, then a nook color showing the front page of Make: Projects, an Arduino schematic, and finally a happy robot. Two observations: firstly, someone in media and advertising doesn’t think ‘hacking’ is WarGames stealing bank accounts. Secondly, an ad exec looked into current users.

Here’s the official YouTube video of the commercial.

In a world… where components aren’t soldered… one man… uses a soldering station.

Adafruit linked to the most outrageous promo video ever. This Weller soldering station provides 240 watts, battles alongside Agamemnon at Troy,  has rework tweezers, and travels to Italy to wage war against the Latins.

An IDE for the 21st century

[Chris] is currently developing a new paradigm for programming. He calls it Light Table, and it’s designed to be an improvement over a simple text editor and project manager. All the documentation is at your fingertips, you can make changes on the fly. It reminds us of the zzstructure emulator we saw last year. It’s something to keep an eye on at least.

One Hackaday Reader’s Experience Going On The Ben Heck Show

April 20, 2012 by 11 Comments

In the Hackaday Froums, [Colecago] shares his experience collaborating with [Ben Heck]. They were building some “Robot Luggage”, and you can see the episode after the break below. The idea was that they would build a piece of luggage that would follow you through an airport instead of having to be dragged.

[Colecago] shares a little about the “behind the scenes process”. There’s a surprising amount of work that goes into a very little amount of video. From what we can gather, this video took over a month to make. [Jesse/Colecago] was quite embarrassed to have run into a mistake that he called “UART Dislexia”, where he repeatedly wired the circuit incorrectly. We say, don’t stress, it happens to everyone.

Another point he brings up is how much of a pain in the butt the Arduino was in this process. While people in the comments often argue about the use of the arduino, [Jesse] explains how this specific case would have been much easier without.

Continue reading “One Hackaday Reader’s Experience Going On The Ben Heck Show” →

Real BMW Dash Cluster For Your Racing Games

April 20, 2012 by 10 Comments

Here’s a cool add on that could making racing games just a little more engaging. How about a real instrument cluster? [Herctrap] has written up the schematics and shared the code to get a real car’s instrument cluster to be driven from x-sim. It is a slightly different approach than we’ve seen before, but really not too complicated.While this is still just another accessory sitting on his desk, it really seems to add a considerable amount of feedback to the game. Next he needs to build a motion rig for his seat!

Continue reading “Real BMW Dash Cluster For Your Racing Games” →

Tearing Down A Colonoscopy Pill Camera

April 20, 2012 by 59 Comments

Normally, colonoscopies are rather invasive affairs. Swallowing a small pill with a camera is much more amenable to a patient’s dignity and are seeing increasing usage in colon cancer screening. [Mike] acquired a pillcam from a relative who underwent the procedure and did a teardown to figure out how it works.

To get the video signal out of the body, the pillcam has two contacts that conduct the video signal through the body to stick-on contacts; It’s a more power efficient way of doing things versus a radio transmitter. After opening the plastic and metal capsule, [Mike] found three batteries and an impressively small circuit that contained an array of LEDs, a camera, and what might be a small MCU.

Taking a scope to the electronics in the pill, [Mike] found an impressively complex waveform that sends uncompressed image data to the receiver every few seconds. Although the camera was somewhat destroyed in the teardown, we’re pretty confident [Mike] could decode the image data if he had another… ‘sample.’

[Mike] says if you can ‘retrieve’ another one of these pill cameras, he’ll gladly accept any donations and look into the differences between different makes and models. Just make sure you sanitize it first. After the break you can see [Mike]’s teardown and the inevitable poop jokes in the comments. One last thing – if you’re over 50, doctors should be looking at your colon every 5 or 10 years. Get screened.

Continue reading “Tearing Down A Colonoscopy Pill Camera” →

Spend Your Weekend Contributing To The Exploration Of Space

April 19, 2012 by 9 Comments

Earlier today we posted a link to a tournament NASA is holding. NASA is trying to crowdsource the organization of terabytes of data collected from missions all over the solar system. A few Hackaday readers wrote in (thanks [grbgout] and all the others) to tell us there is an International Space Apps Challenge going on this weekend to crowdsourse solutions to the problems of space flight.

The challenge is the product of a partnership between NASA, the National Science Foundation, the UK  and Japanese Space Agencies and a host of other organizations like GitHub, Yahoo Developer Network, and even a few hackerspaces. The idea behind the challenge is simple: spend a weekend solving software, hardware, and science challenges to improve the state of space sciences.

There are a lot of interesting projects like programming an interface to a NASA mission simulator, figure out how to print 3D objects in space, and even develop the hardware and software for an underwater ROV.

Aside from the fancy software and hardware challenges, there are also some very interesting data visualization problems, like clearly explaining the fact that space is mostly empty. If you can figure out how to tell people they aren’t the center of the Universe, take a shot at it – there’s probably a Nobel in Literature in it for you.

Right now there are dozens of locations on all seven continents and in Low Earth Orbit (McMurdo Station in Antartica and the ISS) that will have people contributing to these projects. Of course you’re free to work out of the home and help scientists, engineers, and researchers reach to the stars.

Badges? We Don’t Need No Stinking Badges!

April 19, 2012 by 5 Comments

In a an obvious marketing move akin to a drug dealer offering up free samples, Urban threads is offering free badge plans for hackerspaces that have robotic embroidery machines. We’ve seen this trend of badges coming up lately and we don’t know if it is the boy/girl scout in us, or the punk rocker that makes us pine for them. You may laugh, but look at that skull with the welding goggles on. If you don’t think that’s badass… then we disagree.

The idea of giving some away free isn’t new. You can download free photoshop brushes, free fonts, free circuits and all kinds of other free stuff from sites that sell better versions as well. We just couldn’t pass up the chance to point out that skull, and helping out hackerspaces is always good in our eyes. So, who has one of those embroidery machines?

Improving A Freestyle Kayak

April 19, 2012 by 10 Comments

When [Andrea] was looking for a freestyle kayak, he bought the cheap version of a high-end kayak. The hull is exactly the same as the high-end model, but to differentiate between product lines, Pyranha chose to use less expensive fittings. [Andrea] decided to bring his new kayak up to spec (Italian, here’s a Google translation) by fixing the problems in the cheaper model by bringing it up to more professional standards.

When [Andrea] got a hold of his kayak, the back rest was held on by a piece of nylon webbing secured with a plastic clamp. This was bound to fail after just a few outings, so he fixed this with a few steel nuts and bolts. The eyelets used to tie ropes to the kayak were terrible, so with a little bit of nylon webbing and a pair of buckles these were replaced.

Now, [Andrea] has a very nice kayak indeed, for less than the price of the more expensive version. Good job, [Andrea].