Funky Looking Motor Is Powered By Static Electricity

August 9, 2014 by James Hobson 24 Comments

[Steven Dufresne] of Rimstar.org is at it again with another very functional science experiment. This week he’s showing us how he made a large electrostatic motor, also known as a Corona Motor.

A Corona motor makes use of a cool
phenomenon called the Corona discharge, which is the ionization of a fluid
(in this case, air) surrounding a conductor that is energized. He’s done other high voltage experiments that take advantage of this, like his Ion Wind propelled Star Trek Enterprise!

The motor works by using an even number of electrodes on the motor, each electrically charged; positive, negative, positive, negative, etc.

Because each electrode is the opposite charge, they want to repel each other — but since the cylinder is electrically insulated, the charges have no where to go — instead the cylinder begins to rotate as the charges attract back and forth — when a positive charge on the insulation meets a negatively charged electrode, the charge is removed by ionization (creating the corona effect), and the cycle continues. The direction of rotation is determined by the angle of the electrodes. The motor can get going pretty fast but doesn’t have that much torque or power.

Continue reading “Funky Looking Motor Is Powered By Static Electricity” →

More Pole Climbing Bots, Haul Antennas And Bikes

August 9, 2014 by Rich Bremer 10 Comments

Pole Climbing Robot

A few days ago we posted about a Pole Climbing Device. Since then we’ve gotten a few emails with tips about other pole climbers. We are going to talk about two of those here, they are completely different from each other and have completely different uses. Who knew there was such a variety of pole climber bots out there?

First up is this an antenna-wielding bot that climbs up poles in order to promote over the air communications. The system is called E-APS (Emergency Antenna Platform System) and is used by enthusiasts to turn any ol’ parking lot lamp post into an antenna tower. This particular machine has a large rectangular frame made from extruded aluminum. There are four wheels, two of which are driven by what appears to be a car power window motor. The weight of the antenna forces each set of two wheels to be pressed up against opposite sides of the pole, creating enough friction to not only support the unit but allow it to travel up and down the pole. There is not a lot of explanation about the build but there are a lot of detailed photos of the final product. We saw E-APS in action at MakerFaire New York 2013, and it was very impressive.

We’ve covered this next device before but it’s worth mentioning again. The project assumes that no bike lock is strong enough to deter the most persistent thief. Instead of locking your bike up and hoping for the best, this ‘theft preventer’ hikes your bike up out of the reach of would-be bike nabbers. So how do you get your bike down once it is up the pole? A remote control fob, of course.

There are 2 cool videos of these inventions after the break…..

Continue reading “More Pole Climbing Bots, Haul Antennas And Bikes” →

Twitching Fish Plays Pokemon Underwater

August 9, 2014 by Matt Terndrup 12 Comments

fishypokemon

Over a matter of a few days, thousands of people were simultaneously watching this fish named [Grayson Hopper] float around a bowl of water as a webcam recorded its every move and translated the directions it took into a working gameplay of Pokemon Red. Each section of the tank was split into partitions, with each section acting like a button. So when the fish swam over a specific area, the main Pokemon character [Ash] was told where to go.

It was created during a hackNY hackathon within 24 hours when the fish started its journey in to the world of Pokemon. Already, a subreddit popped up documenting the adventure. Amazingly enough, [Grayson] chose Charmander as its starting Pokemon and has defeated its rival Squirtle.

This project was great for watching hours on end, especially at work, as the cute little fish went about its life unaware that it is becoming a popular internet star.

Check out the link above to stream the video. There is even a chat bar on the side, which allows anyone to jump into the fishy conversation. If the fish looks dead though, it’s probably just sleeping.

[Thanks for the tip Bailey!]

Also, Pokemon was reborn some vintage hardware recently which allows the player to game via the web. Check that out too!

Arduino Gives Your Toilet Options

August 9, 2014 by Bryan Cockfield 60 Comments

toilet water saver

With the severe drought going on in California with no end in sight, [TVMiller] decided he could put an Arduino and a toilet together to try and save at least a few gallons of water per day. The invention fills a toilet to the minimum level, saving around two gallons per day for the average “user”.

A typical toilet functions by using gravity and moving water to create a vacuum, sucking the waste down and out of the toilet. As long as there is nothing, uh, solid in the bowl, the toilet will be able to function on the reduced amount of water. The Arduino cuts the flow of water off before the toilet fills up the entire way.

In the event that anyone -ahem- needs the toilet’s full capacity, there is a button connected to the Arduino that fills the reservoir to capacity. [TVMiller] notes that if 1,825 hackers installed this device on their toilets, we could save a million gallons of water per year and be well on our way to saving the planet.

The project site is full of more information and puns for your viewing pleasure. We might suggest that the “2” button would be very easy to integrate with the toilet terror level indicator as well.

Unorthodox GoPro Camera Rigs Produce Unreal Videos

August 8, 2014 by James Hobson 15 Comments

For a workshop at the ECAL University of Art and Design in Switzerland, students were asked to come up with new unorthodox ways to capture video using a GoPro camera. The results are pretty awesome.

Lead by the Dutch designer [Roel Wouters], students in the Media & Interaction Design program worked together with Industrial Design students to create these fascinating camera rigs. From “the eye”, a water based stabilizing ball, to a silly bobble hat can be spun around the user, the results are super fun and unique to watch. The workshop was one week long and produced five different camera rigs as featured in the following video.

Continue reading “Unorthodox GoPro Camera Rigs Produce Unreal Videos” →

Estimating BB Gun Muzzle Velocity With A Voice Recorder And A Curtain

August 8, 2014 by James Hobson 17 Comments

121786041305012580402601197_dietcokeandmentos

[Luke Wren] just wrote in to tell us about his new science blog called Wren’s Tech — it’s only a few days old, but he’s already got some pretty cool science experiments written up! Like how to estimate the muzzle velocity of a BB gun using just a voice recorder, and a curtain!

There are many different ways you could do this. One of the easiest is using a high-speed camera with a known grid or pattern as the background — like how Mythbusters does it. Unfortunately, high-speed cameras are usually out of reach for most hobbyists. [Luke] explains a rather cool system you can build with some electronics, whereby you have two thin wires a known distance apart — run current through both and use a circuit that can detect the interrupt as your projectile breaks the wires — or, you can use a voice recorder. Continue reading “Estimating BB Gun Muzzle Velocity With A Voice Recorder And A Curtain” →

Wooden Case Sega Saturn Laptop

August 8, 2014 by Rich Bremer 10 Comments

CNC'ed Wooden Case for Sega Saturn

Remember the Sega Saturn? You know, that short-lived game system of the mid 90’s. Well, [c_mon] is still a fan and decided to make a portable version with a built in screen.

As you can see from the photos, the main case is made from wood, plywood to be exact. Several pieces of the plywood were cut out using a CNC Router and laminated together to achieve the full height needed to enclose the internal electronics. The finished case takes up a little less real estate than the original, however it is slightly taller.

You may recognize the screen as an old PSOne unit. The screen was taken part and housed in it’s own wooden enclosure which is hinged to the main case. The video is supplied to the screen by a composite output from the Saturn. There is no unique CD lid either, the screen functions as one when it is folded down. For sound there are a couple built in powered speakers that tap into the stock audio output.

To ad a little pizzazz, [c_mon] routed in a groove in the top to accept some EL wire. There are also some cool engravings in the wooden case, including the Saturn Automobile Manufacturer logo on the top of the screen lid…. whoops!

CNC'ed Wooden Case for Sega Saturn