Author: Zoe Skyforest

3822 Articles

VGA Framegrabber Built From Scratch

June 21, 2020 by 35 Comments

Modern computers are replete with all manner of digital video interfaces. DVI, HDMI, DisplayPort are all examples of this. In the old days, VGA ruled the roost, sending video to monitors as an analog signal. However, it’s possible to convert this back into a digital format, and [vihapuu] has done just that with his Grabor project. (a demo video is also embedded below.)

The project relies on a Texas Instruments TVP7002 to do the hard work of converting VGA into a digital signal. The output of this chip is then picked up by a CPLD which clocks the resulting data into SRAM. An NXP microcontroller is then responsible for taking the data from SRAM and sending it out over a network interface, thanks to a Microchip ENC28J60 Ethernet controller.

We can imagine this kind of tool would come in handy for working with retro machines over a network. We’ve seen other interesting VGA hacks before too, like this EEPROM-based signal generator. Video after the break.

Continue reading “VGA Framegrabber Built From Scratch” →

Wurlitzer Note Visualizer Gets A 2020-Spec Replica

June 20, 2020 by 1 Comment

Way back in the 1970s, when smog laws were choking American V8s and the oil crisis was in full swing, Wurlitzer released their Key Note Visualizer. Intended as a teaching aid, the device lit up keys on a keyboard graphic, allowing an organ player to visually demonstrate their performance to a class. [Guy Dupont] set out to replicate this hardware, but with a modern twist.

The build consists of an ESP-32, which accepts MIDI data over Bluetooth Low Energy. This is then used to light up a series of RGB LEDs on a musical staff and a keyboard graphic, corresponding to the notes being played. The LEDs used are the old-school four-wire type, rather than more modern data-driven types. They’re placed in 3D-printed holders which serve to stop the light from each LED bleeding into adjacent areas. The faceplate is made of acrylic, stencilled with that classic orange paint and with vinyl decals applied for the markings. It’s all wrapped up in a walnut case, which [Guy] CNC machined himself.

It’s a tidy build that faithfully recreates the 1970s aesthetic of the original. We plaintively wish that manufacturers would release more electronics in walnut enclosures, though ask politely that they leave cheap veneer in the past where it belongs.

Of course, if you like your musical displays more abstract than instructional, try this giant oscilloscope visualisation on for size. Video after the break.

Continue reading “Wurlitzer Note Visualizer Gets A 2020-Spec Replica” →

Smartglove Helps Cyclists Be Seen

June 20, 2020 by 25 Comments

Cyclists share the road with other vehicles, often leading to problems when drivers fail to see or respect the rider’s space. To try and alleviate these issues, [Matlek] built the Smartglove to help cyclists communicate their intentions to other road users.

The project consists of a glove fitted with an Arduino Nano 33 BLE sense, featuring Bluetooth and motion sensing on board. Combined with TinyML machine learning code, the Arduino is able to sense hand gestures from the rider. These gestures are then interpreted, and relevant messages displayed on an LED screen worn on the rider’s back. Flicking the wrist left and right flashes indicators that the user is about to change direction, while a rearward flick flashes a warning that the user is braking.

It’s a tidy way to integrate vehicle-style lighting into a simple interface for cycling. This has benefits, particularly at night, for allowing other road users to see a cyclist and understand their intentions on the road. Of course, if you really want to be noticed, this bike boombox could also be a big help. Video after the break. Continue reading “Smartglove Helps Cyclists Be Seen” →

Scanning Analog Film For The Last Time

June 19, 2020 by 44 Comments

Film cameras are capable of great resolution, and for a long time were superior in this regard to their digital successors. However, it’s now possible to store digital copies of analog images in superior detail, so [Jan] built a rig to scan their photos for the last time.

The general idea is to take a high enough resolution scan of film negatives or slides, such that there is no need to rescan the images when technology moves forward. To achieve this, [Jan] decided to employ a DSLR to photograph the materials in question. To do this quickly and accurately, with minimal fuss, special lens hoods were 3D printed to hold slides in perfect register in front of the lens. With a flash to provide even light, the results are excellent. Film negatives proved harder, requiring a carefully designed transport mechanism to avoid damaging the fragile materials. With some perseverance, the final tool worked well.

It’s a tidy way of digitally archiving analog photos, and with the resolution of modern cameras, one needn’t worry about lost resolution. We’ve seen mechanised builds for handling other formats too, such as this 8mm scanner. Video after the break.

Continue reading “Scanning Analog Film For The Last Time” →

Up Your Home Network Performance – Build Your Own Router!

June 19, 2020 by 118 Comments

Internet connections continue to increase in speed, and for a lucky few, it’s possible to get a Gigabit fibre connection at home. However, if you’re intending to use this connection to its fullest, you might find that your off-the-shelf router has become a bit of a bottleneck. [Wes Fenlon] of PC Gamer had this very problem, and found the perfect workaround – building a custom router instead!

The main problem with commodity routers is a lack of processing power. With networks growing ever faster, the hardware in routers hasn’t kept up with the needs of demanding power users. To solve this, [Wes] grabbed an old PC he had lying around, packing a quad-core i5 CPU and 16 GB of RAM. Fitted with an enterprise-grade 4-port Gigabit LAN card, and running Netgear’s  (Sorry commenteers!) Netgate’s pfSense routing software, the old machine has enough power to be complete overkill for the application.

The side benefit of this method is configurability. pfSense has a far more powerful set of options than most common routers. It’s config page also runs far more smoothly, too. There’s also the possibility to run all sorts of useful plugins, like router-level ad blockers and traffic monitoring utilities.

Overall, it’s a great way to repurpose a surplus machine and improve your network performance on the cheap. Others have tried similar builds, too. It has us contemplating the possibilities for our own networks at home!

One-Percenter Mods For Premium Apple Pencil Usability

June 18, 2020 by 32 Comments

At $129 USD, Apple certainly do sell a very expensive “pencil”. Despite the high cost of entry, [Eric] identified several shortcomings and set about solving them himself with a few choice mods.

The first concern is the excessively slippery surface finish, that could lead to the expensive device being dropped and damaged. [Eric] starts by creating a special tool to help handle the pencil during the refinishing process. He highlights how key this is to getting a good final result, without fingerprints or other flaws ruining the finish. With the manipulator ready, the pencil is then given a wipe down with wax and grease remover prior to a dusting of a translucent spray paint. The finish is poor, however, and [Eric] instead elects to try again with a plastic primer first. A series of tinted clear coats are chased with a urethane clear topcoat for a hardy, grippier surface texture.

The final mod concerns the tip. It’s lathed down in a power drill to give a shape more akin to the ballpoint pens [Eric] is used to sketching with. Additionally, the tip is dyed black with a Sharpie marker and a heat gun, to help it contrast better when sketching on a white screen.

These mods may seem trivial to a casual user, but for a designer who draws for a living, usability is key. The striking orange finish is just a bonus. We don’t see too many stylus mods, but with the increased popularity of tablets, we’re sure to see more down the road. If you’ve got one, be sure to drop us a line! Video after the break.

Continue reading “One-Percenter Mods For Premium Apple Pencil Usability” →

Overclocking And Watercooling The TI-84, Just Cause

June 16, 2020 by 23 Comments

The TI-84 is an enduring classic – the calculator that took many through high school, college and beyond. A hacker’s favorite, it’s been pushed to the limits in all sorts of ways. The crew at [Linus Tech Tips] decided to join in the fun, overclocking a TI-84 Plus and adding water cooling to boot. 

The TI-84 uses a simple resistor capacitor circuit to generate its clock, making it overclocking it a cinch. By changing the resistor value in the circuit, the clock can be made to run faster. The team have some issues with pads delaminating from the PCB, but manage to sub in a trimpot which lets the clock be changed on the fly. A boost of 10MHz over stock gets the calculator operating at 26MHz, with notably quicker performance in the TI port of Doom 2. Without accurate measurement of CPU temps, it’s hard to say whether watercooling the calculator is justified. However, the team do a great job of entirely overengineering the solution, with a custom-made cooling block hooked up to a massive spherical reservoir.

With the stability issues inherent in overclocking, and the unwieldy watercooling tubes, it’s not a good hack in the practicality sense. It is, however, quite amusing, and that’s always worth something. TI calculators have long been targets for hackers, and you can even get them online if you so desire. Video after the break.

Continue reading “Overclocking And Watercooling The TI-84, Just Cause” →