Resurrecting A Hi-Fi Cabinet

July 7, 2012 by 25 Comments

[VintagePC] pulled this old stereo out of a barn. It was in pretty shabby shape, but he managed get it running again and make it look great as well.

While it had been protected from the elements, it had not been protected from the rodents. Mice had chewed their way through the fiberboard backing and made a nice home inside. He mentions that they chewed the string which operates the tuning dial, and we’re sure they were the cause of other problems as well. He gives the wise advice of not powering on an old set like this until you have a chance to assess the situation.

The insides of the amplifier were about as disorderly as the last radio repair we looked at. But after carefully working his way through the circuits, replacing capacitors and resistors as needed, he started to make some progress. The receiver coil needed to be rewound and he used wire from an old CRT monitor for this purpose. The loop antenna was remounted and the record player arm was given a new cartridge and balanced using a clever LEGO apparatus. Some veneer work and wood finishing brought the case itself back to its original beauty. We’d say the hard work was well worth it. He’s got a big piece of furniture he can always be proud of!

Going To The Park With Your Augmented Reality Girlfriend

July 7, 2012 by 50 Comments

Lonely? Bored? Really into J-pop? If you’re any of these things, here’s the build for you. It’s an augmented reality system that allows you to go on a date with one of Japan’s most popular virtual singers.

The character chosen to show off this augmented reality girlfriend tech is [Hatsune Miku], a voice synthesizer personified as a doll-eyed anime  avatar. [Miku] is an immensely popular character in Japan, with thousands of people going to her concerts, so choosing her for this augmented reality girlfriend project was an obvious choice.

The build details for this hack are a little sparse, confounded by the horrible Google Translate results of the blog linked in the YouTube description. From what we can gather from the video and this twitter account, the build is based on an ASUS Xtion Kinect clone and a nice pair of video goggles.

We’re expecting the comments for this post to fill up with, ‘Japan is really weird’ comments, but we can see a few very, very cool applications of this tech. For instance, think how cool it would be to be guided around a science museum by [Einstein], or around Philadelphia by [Ben Franklin].

Monitoring A Clothes Washer With An Accelerometer

July 7, 2012 by 15 Comments

[Viktor’s] washing machine did a good job of cleaning his clothes, but it kept a bit too quiet about it. The machine doesn’t have an audible alert to let him know the cycle has finished. He decided to build his own alarm which can just be slapped on the side of the machine.

You can see that a couple of magnets hold the board to the metal housing of the washer. The board doesn’t actually connect to any of the machine’s circuitry so this should work about equally as well for any unit. The detection is based on motion, thanks to a Freescale MMA7361 3-axis accelerometer. When he starts a load of wash he flips the power switch for the board on. The PIC 12F683 that drives the device starts monitoring the accelerometer for changes. If it goes for more than about one minute without reading motion the piezo buzzer starts beeping. It’s a fun and easy solution along the same line of this oven pre-heat alarm add-on.

Keyless BMW Cars Prove To Be Very Easy To Steal

July 7, 2012 by 84 Comments

A lot of higher end cars are now coming out with RF fobs that unlock and start the car. There is no longer a physical key that is inserted in the ignition. It turns out that for BMW this means stealing the cars is extremely easy for a sophisticated criminal. We always liked the idea of metal keys that ALSO had a chip in them. The two-tiered security system makes sense to us, and would have prevent (or at least slowed down) the recent  rash of BMW thefts that are going on in the UK.

So here’s the deal. A device like the one seen above can be attached to the On-Board Diagnostic (ODB) port of the vehicle. It can then be used to program a new keyfob. This of course is a necessary feature to replace a lost or broken device, but it seems the criminals have figured out how to do it themselves. Now the only hard part is getting inside the car without setting off the alarm. According to this article there are ultrasonic sensors inside which are designed to detect intrusion and immobilize the vehicle. But that’s somehow being circumvented.

You can check out a keyfob programming demo, as well as actual theft footage, after the break.

Continue reading “Keyless BMW Cars Prove To Be Very Easy To Steal” →

Minot Makers Launch Red Bull Too!

July 7, 2012 by 6 Comments

When we posted our redbull firing pneumatic cannon, we got a pretty quick email from [Ryan] at Minot Makers. Apparently, they were working on a redbull cannon as well. Theirs, however, has a completely different use. They intend for this to fire a redbull with a gentle arc allowing you to simply catch and drink it. They appear to be firing over a fairly short distance, so this isn’t any more dangerous than, say, tossing a drink to a friend a few feet away.

Their approach to handling the barrel size/can size difference was to build a piston cannon instead of a sabot. This conveniently also allows for easy firing of pretty much anything that will fit! [Ryan] described some future plans to give this an r/c platform allowing it to drive around at events and deliver beverages. That would be pretty cool.

Set Your Arduino Free With Wifino

July 6, 2012 by 7 Comments

[Tod] wrote in to tell us about his latest project. It’s called wifino, and aims to set your Arduino free by offering a web-based IDE, online storage for your Arduino sketches, and even WiFi enabled hardware to upload sketches wirelessly.

The wifino was conceived with the same train of thought as the codebender IDE we saw earlier this week. Instead of only providing a web-based programming environment, the wifino works in conjunction with wifino hardware, meaning you can upload sketches over a wireless connection.

On the software side of things, the wifino IDE features code editing, compiling, and uploading right from a browser. There are plans for a github-style interface in the works, allowing for the easy sharing of Arduino sketches from makers around the world.

[Tod] is planning on getting a Kickstarter underway in the next few weeks to get the wifino boards out into the wild. We’ll be sure to keep you updated with any info or specs that come our way.

You can check out [Tod] uploading code from the Windows and iOS clients after the break.

Continue reading “Set Your Arduino Free With Wifino” →

Data Mining And Saving Money With Octopart’s Historical Pricing

July 6, 2012 by 6 Comments

[Greg Shikhman] is at Octopart this summer as a software development intern. In between the time he’s spending getting coffee for the other devs, he came up with historical pricing for thousands of components available at Octopart

There’s a lot of cool data out there, like this bit of pricing info for a 555 timer. We’re guessing a few people were out of stock of 555s around the end of May, explaining why they were selling (well, available for) $1.68 a piece. If you’re trying to source components, it might be worth your while to check out Octopart’s historical price index. Buying a PIC microcontroller last August was a roll of the dice; in one day the price changed from $5 to just over $2.

With all this data, it’s even possible to data mine for real life events unrelated to shipping and stocking issues. Japanese manufacturer Renesas was hit pretty hard by last year’s earthquake, and this shows up in the historical prices for one of their microcontrollers. Not bad for an intern’s project.