MakerFaire K.C. Sneak Peak At ArcAttack’s New Toy

June 25, 2012 by 17 Comments

I’ve been seeing videos of ArcAttack all over the web for several years now and hoped one day I’d be able to cross paths with them. When I heard they were going to be at MakerFaire K. C., I was determined to grab them and ask a few questions. As it turns out, they’re fans of Hackaday and were happy to talk. Not only that, but when I was asking what fun things they were building, their eyes lit up. “You’re going to love this” one of them said as he ran off behind the stage.  He returned with a device which was strapped to his body and spitting 5 foot long lightning bolts. He was right, I did love it!  They demonstrated this proton pack looking portable tesla coil for a while, shocking each other and random bits of metal, all the wile grinning like the fools we all are.

I know we’ve covered a portable tesla coil or two before, but seeing this thing in person,heading right for you,strapped to someone who might actually even be able to run faster than you, is pretty cool.

There is video (sorry, shaky) and a ton of pictures after the break. Enjoy.

Continue reading “MakerFaire K.C. Sneak Peak At ArcAttack’s New Toy” →

Building A Boombox Where Tools Are Meant To Go

June 25, 2012 by 28 Comments

[Danman1453] is ready to face the rest of his summer thanks to this toolbox boombox he built for outside use. It’s always nice to have some tunes when laboring at those not-so-fun jobs (we’ve got some windows that need re-glazing and you can bet we’re not doing that in silence). But if you can’t really hear it what’s the point? The highest volume [Danman1453] could get out of the consumer options he tried just wasn’t cutting it, and that led him to this project.

The only thing he bought to complete the boombox was some black spray paint. He already had an old toolbox for the enclosure, a head unit and the larger speakers from an old car, and the small speakers came from a set of computer speakers. Those are cleverly mounted in the compartments on the lid of the toolbox, pointed down so that they’re oriented correctly when the lid is propped open. The faceplate was even recycled by using wood an old shipping pallet.

He would like a little bit of advice though. When he’s playing a CD and the bass really gets bumping the head unit tends to skip. Does anyone have an easy method of isolating it from the speakers while still keeping it safe and sound in the portable enclosure?

Melting Beer Cans And Building Engines

June 25, 2012 by 28 Comments

What do you do if you’ve got a fully equipped machine shop and you’re tired of taking old beer cans to the recycler? If you’re like [Brock], you’ll probably end up melting those cans down to build an engine.

After gathering 50 pounds of beer cans and melting them down into ingots of various sizes, [Brock] and company had a lot of aluminum and nothing to build. Eventually, someone got the idea to build an internal combustion engine out of these beer can ingots.

So far, the beer can engine crew has built two engines from these beer can ingots. The four-stroke engine started off as a 5-inch aluminum cube, bored and milled into something resembling an engine block. When [Brock] and the beer can engine team completed their four-stroke masterpiece, they had a water-cooled engine displacing 150cc with a single 2″ bore piston. The two-stroke engine is a much simpler affair with a 1 inch bore displacing 19cc.

Even though there’s no information at all covering the pottery kiln foundry used to melt the beer cans into ingots, it’s an amazing piece of work building and engine from the ground up.

You can check out a few videos of both engines after the break.

Continue reading “Melting Beer Cans And Building Engines” →

Better Driving With A Bullduino

June 25, 2012 by 7 Comments

Despite what you may have heard from the kids hanging out in the parking lot of Taco Bell, there’s a lot to be said about driving conservatively. Not peeling out after ever red light and stop sign does wonders for the life of your engine, and not slamming on the brakes 50 feet away from an intersection will keep your brake pads going a long time. [aromaoftacoma] wanted a dashboard gauge telling him how good of a driver he is, so when he got a bullduino he knew what he had to do.

[aromaoftacoma]’s project for the Redbull creation contest uses the very cool Arduino shield/Redbull logo known as a bullduino with an accelerometer to track how conservatively he’s driving. Quick stops and starts are murder on an automobile – it’s the same reason your grandmother has had the same car for 20 years – so [aromaoftacoma] made a wonderful display using red and blue LEDs behind each charging bull.

Because simply blinking a LED in response to data pulled from an accelerometer is a little boring, [aromaoftacoma] added a servo to change the orientation of the charging bulls. When he’s driving well, the blue bull is tilted up, and when he stops short the red bull becomes the focus of attention. Not a bad build at all.

You can check out [aromaoftacoma]’s build video after the break.

Continue reading “Better Driving With A Bullduino” →

Don’t Bring Your 3d Printer To MakerFaire

June 25, 2012 by 48 Comments

This could easily be called “the year of the 3d printer”. They are in the news, in every hackerspace, and at every event. This last one is the one I’m going to focus on here. All the coverage we’ve seen as well as our personal experience shows that MakerFaires are filled with 3d printers. At MakerFaire K. C., there were so many that I lost count. I didn’t even bother taking pictures or stopping to look after a while. Many were makerbots, though a few repraps were present too.

If you want to be noticed at MakerFaire, DON’T BRING A 3D PRINTER AS YOUR SOLE DISPLAY.

Continue reading “Don’t Bring Your 3d Printer To MakerFaire” →

Playing Video On An 8-bit Microcontroller

June 25, 2012 by 8 Comments

The LCD displays for Nokia phones have seen a ton of use as easily interfaced displays for Arduino or other microcontroller projects. Usually, these LCDs are only used for displaying a few lines of text, or if someone is feeling really fancy, a small graph. Shame, then that we don’t see more complicated and computationally difficult tasks like playing video very often. [Vinod] sent us his way of playing video on these small color screens, surprisingly using only an ATMega32 microprocessor.

The build started off by saving uncompressed image data on an SD card using code from a previous project. [Vinod] was able to write a slideshow program to go through the SD card one file at a time and displaying each image. From there, it was simply a matter of using a Python script to convert frames of an .AVI video file to an uncompressed image and display them at 15 frames/second.

Turning these videos into talkies was a bit of a problem, but after taking an uncompressed .WAV file and sending that to a PWM pin on the ATMega, [Vinod] managed to play sound alongside his video.

The result is the ability to play a video with sound at 15 frames a second and a 132 x 65 resolution. You can check out the demo video after the break.

Continue reading “Playing Video On An 8-bit Microcontroller” →

MakerFaire K.C. First Impressions

June 25, 2012 by 19 Comments

I arrived at the Kansas City MakerFaire bright eyed and bushy tailed, excited to meet up with like minded people and see awesome projects. I was not disappointed in that respect. The building itself is quite beautiful with giant main rooms and decorated 40 foot tall ceilings. If you haven’t ever seen the Union Station in Kansas City, I suggest you check it out. It is really quite fantastic on its own.

The event seemed rather well organized. There were talks on different subjects as well as clearly outlined areas for each event. The place was absolutely packed, but walking around still managed to be tolerable. Volunteers in bright red shirts were wandering around offering assistance to anyone looking lost or confused. I didn’t run into a single person complaining about the event. I’ve been to a ton of large events and there are usually a few people who were upset. I didn’t find any here.

The booths covered subjects from all over the place. There was knitting, model rocketry, robotics, lego construction, random hacks, cast making, and of course, 3d printing.  I’ll be posting projects separately, as there were only a selected few that I think our readers would enjoy.

There were only 3 things I found frustrating.

1. Some of the coolest stuff I found, we have already covered.

2. I didn’t have time or ability to get as much detail on any one project as I would have liked. I’m used to seeing full write-ups with schematics and pictures. I only had a couple minutes with anyone. There were constant distractions as well as an amazing amount of noise (tesla coils especially!). I walked away felling almost like there was no point in doing interviews, but I guess this is how “on location” stuff works.

3. My footage is shaky. I apologize in advance. I didn’t end up bringing a rig with me to stabilize the camera and I spent the whole time wishing I had. I know how frustrating shaky footage is. I’m truly truly sorry. I will flog myself appropriately at my soonest opportunity.

after the break is a small gallery of random pics from the event with pretty much no accompanying info. Actual posts will be coming soon with details.

Continue reading “MakerFaire K.C. First Impressions” →