Sound-reactive EL Wire Box Makes Gift Giving Awesome

January 15, 2012 by 5 Comments

sound-reactive-el-wire-display

[Jonathan Thomson] was ruminating on EL wire displays and decided that most he has seen are boring, static fixtures or installations that simply flash EL wire on and off at a fixed rate. He thought that EL wire has far more potential than that, and set off to build something more exciting. Using a graphic equalizer T-shirt, with which we’re sure you are familiar, he put together a slick, sound-reactive EL wire display.

He started off by removing the EL panel and inverter from the aforementioned T-shirt, separating the display into two pieces. He set aside the panel and focused on wiring up the inverter’s ribbon cable to a set of EL wire strands he picked up for the project. Once he had everything hooked up, he put a design together on a cardboard box, which he intended to use for wrapping Christmas presents. With the holiday behind him, [Jonathan] broke down his original display and constructed another to offer up some fun birthday wishes.

While the EL inverter was originally built to display sounds detected by an onboard mic, [Jonathan] added a 3.5” stereo jack to his so that he can feed audio directly into the display using an MP3 player.

Continue reading to see the EL display in action, and be sure to check out his writeup if you are looking to spice up your gift giving this year.

Continue reading “Sound-reactive EL Wire Box Makes Gift Giving Awesome” →

Freeze Drying Astronaut Ice Cream

January 15, 2012 by 29 Comments

In our younger and more vulnerable years nothing was greater than visiting a museum, going to the gift shop, and badgering our parents to buy a pack of astronaut ice cream. Freeze dried ice cream leaves a taste of nostalgic chalky sweetness in our mouths, so we’re very excited to see that [Ben Krasnow] is now making his own astronaut ice cream.

The basic principle of freeze drying is simple. All you have to do is reduce the pressure and temperature of the food below the triple point of water and pump the sublimated water vapor out. For [Ben], this meant he needed to cool his Neapolitan Klondike bar to -30° C in a bath of chilled ethanol and pump out the air with a vacuum pump.

Interestingly, [Ben] found it necessary to heat his ice cream while under vacuum to extract more water vapor. This makes sense; at the pressures he was dealing with, [Ben] would never come across water in a liquid state. The entire process took about 18 hours. [Ben] admits this may have been a little longer than necessary, but it’s a small price to pay for reliving childhood memories.

[Jamie Zawinski] Controls His Drapes From The Command Line

January 14, 2012 by 20 Comments

As one of the founders of Netscape and the Mozilla Project, [Jamie Zawinski] is no stranger to frustration elicited from syntax errors, terrible implementations, and things that don’t work even though they should. This familiarity of frustration is what makes [jwz]’s command line controlled curtains so great; it’s rare to see someone so technically proficient freaking out over the lack of DHCP on an Arduino Ethernet.

[Jamie]’s project begins as so many do – modifying an existing piece of hardware to connect to the Internet. This is easier said than done, as [Jamie] fried a USB hub, FTDI cable and an Arduino Ethernet all at the same time. Finally turned onto the seeed relay shield, [jwz] got busy writing scripts to power his curtain.

Of course, this level of automation is nothing without a good bit of integration. After [Jamie] realized his projector (a Panasonic PT-D5500U) and receiver (Denon AVR-2805) could talk to his computer, he got busy mashing them together with a Griffin PowerMate. Mashing the button on the PowerMate turns on the projector and closes the drapes. There’s also a cron job running so that [Jamie] is reminded of the glowing orange ball in the sky.

Weekly Roundup 1/14/12

January 14, 2012 by No comments

For those of you who haven’t been paying attention in class, here is the best of what has hit our blog this past week:

In the #1 spot is a post about a project where some pretty ambitious hackers found a way to run Linux on a digital picture frame. Bravo!

Next up is a post where [Chris] needs some help getting his 1/10th scale, cycle accurate Cray I ‘supercomputer’ to boot.

In third place is a post about a very elaborate 737 cockpit simulator that was built over the past couple of years. This is a pretty intense build with lots of details about how it was done.

Following that is a post about a 3D-printed device that is similar to a phenakistoscope but instead of using slits to allow you to see the models in succession, it blinks some LEDs at the appropriate times.

Finally rounding things out in fifth place is a post about Makerbot Industries’ most recent release, which will let you print out your own phenakistoscope. This 3D printer is bigger than their makerbot and optionally sports two extruders instead of one so that you can do dual colors or possibly dual materials.

Python Maps Mouse Movements On An LED Matrix

January 13, 2012 by 8 Comments

[Vinod Stanur] is working with a mouse input and a microcontroller driven LED matrix. The mouse cursor is tracked inside of a window by Python and the resulting coordinates on the LED grid are illuminated. He calls it an LED matrix “Paint Toy” because one of the features he’s included lets the user create pixel art like in MS Paint.

The 10×8 grid of lights is controlled by a PIC 16F877A. This display orientation is perfect for the 8-bit controller, which uses an array of ten bytes to keep track of the pixel data. A computer running his Python application (which uses the Pygame module to track the mouse movements) communicates with the display board via an RF connection. Five bytes plus a stop character make up the communication packet. The first two bytes contain the coordinates of the cursor, the other three bytes contain mouse button status.

As you can see in the demo after the break, the system is very responsive. The mouse can be moved quickly without latency issues, and if the cursor leaves the tracking window it gets picked up right away when it re-enters.

Continue reading “Python Maps Mouse Movements On An LED Matrix” →

Laser-triggered Camera Rig Update: 2011 Version

January 13, 2012 by 5 Comments

[Fotoopa] keeps churning out new iterations of his laser-triggered camera rig. This is his latest, which he calls the 2011 setup. Regular readers will remember that we just covered a different version back in November; that one was the 2010 rendition. It had two DSLR cameras offset by 90 degrees with mirrors to face forward. This time around he has gone back to the single camera setup which was what he used on the first and second versions seen way back in 2008.

Whew, that’s a lot of links to specialty DSLR hardware. Let’s bring it back to this newest model (the link at the top). The biggest improvement is the shutter delay between when the laser beam is tripped and the image is take. [Fotoopa] reports that he’s managed to reduce that time down to 3.3 milliseconds. This is thanks to an external shutter replacement which improves on the stock shutter’s 52 millisecond delay.

For those that are seeing this for the first time. [Fotoopa] uses this rig to photograph insects in motion. A laser trip wire is responsible for triggering the shutter, and it does so with stunning results!

[Grenadier] Wins The Laser Cutter For His Portable X-ray Project

January 13, 2012 by 13 Comments

The results of the Full Spectrum Laser contest over at Build Lounge have been announce. The top prize of a 40 watt deluxe laser cutter goes to [Grenadier] for the portable x-ray machine we saw at the beginning of the month. We think this is an excellent choice for top prize because, come on, this is pretty hard-core.

Taking second place was a Christmas light show choreographed to music. The open spaces of the University of Minnesota hosted the installation. We’ve embedded a video of the performance after the break.

Third prize went to the QC Co-lab Hackerspace for their light wall. It uses the ever popular GE Color Effects lights, with each bulb housed in a vacuum formed pyramid which acts as a diffuser.

There were also several honorable mentions. There’s a special place in our heart for [Jack Buffington’s] solar clock which was included in this group. We think the use of fiber optics to pipe the sunlight into a machined index ring is ingenious. And you’ve got to give him credit for developing a project that uses no electricity and almost no moving parts (there is a slider to adjust for daylight savings time).

Continue reading “[Grenadier] Wins The Laser Cutter For His Portable X-ray Project” →