Using Incandescent Bulbs To Compensate For A Slow Start Cfl

May 2, 2012 by 20 Comments

[Dick], like most of us, likes some pretty strong light in his workshop. He’s using CFL flood lamps to save a little energy. Unfortunately, he found that they gradually become brighter instead of that instant light he was accustomed to with his previous incandescent bulbs.

Not wanting to wait around for the lights to reach full power, but still wanting to save electricity, he devised a plan . He would install an incandescent bulb along side the others and fade it out slowly as the others became brighter. He acknowledges that he could have just put a 5 minute timer on it, but the transition would be abrupt and unpleasant. Instead, he built a circuit to get the exact result he wanted.

Just so you don’t miss it, the actual build is available to download at a link toward the bottom of the page.

[via HackedGadgets]

Hackerspace Intro: HeatSync Labs In Mesa Arizona

May 2, 2012 by 15 Comments

Following along with our request for hackerspace tours [Will] sent in this fantastic tour of HeatSync Labs in Mesa Arizona. This is exactly what we love to see. A quick tour, showing us who you are, where you are, what is going on, and what people have done. This place looks like a really well run hackerspace too. Lots of equipment ranging from soldering stations to wood shop, welding booth, laser cutter, 3d printing, 3d scanning, and hopefully (eventually) a fully functional electron microscope! Great job folks, if we’re ever in the area, we’ll be sure to stop by and see what you’ve got going on.

Check out the video tour after the break.

Continue reading “Hackerspace Intro: HeatSync Labs In Mesa Arizona” →

Giant Pink Hexacopter Is Slightly Safer Than The Rest

May 2, 2012 by 11 Comments

Check out this giant pink hexacopter.  We see tons of quad copters here, but their bigger brothers/sisters the hexacopters don’t visit very often. When they do though, they get all dressed up as you can see in the picture above. This prototype frame is meant to protect both the props, and the innocent bystanders as you inevitably veer into something you shouldn’t.  The frame is constructed mainly from carbon fiber and adds a total of about 1 Kg of weight to the copter. While it does fly, [AirvewLive] is looking for guidance on what prop/motor combo would yield more endurance. Anyone have some recommendations?

We know some of you will notice pretty quickly that he refers to this as a “ducted fan”. We realize it isn’t and we’ll forgive him this once because his build is so cool.

[thanks for the tip Mike]

ATiny Powered Kinect Fire Cannons For Dance Fx

May 2, 2012 by 6 Comments

[Paul] is at it again with some kinect controlled fire poofers. You may remember [Paul’s] previous shenanigans with the gigantic hand made hydraulic flame-sailed pirate ship.  This time he is building a small flame poofer (possibly a series of poofers) for SOAK, a regional (unaffiliated) Burning Man style festival in Oregon.

Any one who remembers the build will recognize the brains of the new cannons, they are just the pirate ship’s custom ATiny board unceremoniously torn from their previous home and recycled for the new controller. This time though they have Kinect! The build seems to function much like the evil genius simulator by simply using a height threshold to activate each cannon, but [Paul] has plans for the new system. This hardware test uses the closed source OpenNI but will meet its full potential when it is reborn in SkelTrack, which was just released a few weeks ago. The cannons are going to go around a small single person dance floor, presumably with the Kinect nearby.

Check out the brief test video after the jump.

Continue reading “ATiny Powered Kinect Fire Cannons For Dance Fx” →

7 Foot Long Flying Dragon Breathes Fire

May 1, 2012 by 22 Comments

What do you have to do to win best of show at an R/C event in Toledo? Build a 7 foot long fire breathing radio controlled dragon of course! [Rick Hamel] stuffed his electronics, a turbine engine, a kerosene tank, and a stun gun into a home built body shaped like a dragon. You can see a few construction pics that show how he is able to steer. It looks like it flies just like any r/c airplane. This one, however could burn down a village and keep going. Check out the videos after the break to see it flying and testing out its fire breathing mechanism.

Continue reading “7 Foot Long Flying Dragon Breathes Fire” →

Build A Rig To Make Orbs In Your Light Paintings

May 1, 2012 by 10 Comments

We’ve covered plenty of light painting projects here. People are always finding new ways to create interesting things in this fairly new medium. This project covers a method of creating orbs or spheres in your light paintings. The author points out that many people do this currently by putting the light source at the end of a string, swinging it in front of them like a propeller, and turning slowly in a circle. He wanted to automate the process a bit, so he combined his motorized telescope tripod, a power drill, a strip of RGB LEDs, and a few scraps of wood. He now has an automated system to make perfect orbs. Some of the examples he shows are quite stunning.

Playing Pong With Your Mind

May 1, 2012 by 2 Comments

It seems [Charles Moyes] and [Mengxiang Jiang] won’t suffer from the sore wrists and thumbs from an Atari controller any longer. They built a version of Pong played by concentrating and relaxing while wearing an EEG headset.

Right now, there’s only enough hardware for one player; when the player operating the red paddle concentrates the paddle moves up – relax, it goes down.

The hardware portion of the build is fairly tricky business. [Chuck] and [Mengxiang] built a circuit to amplify the tiny voltages between their ears into something a microcontroller can read. The circuit is loosely based on this Arduino EEG build, but highly refined as the elegance of an ATMega644 requires.

The EEG amplifier has a cutoff of under 50 Hz, perfect for reading the Alpha waves correlated with concentration. The oscillations from the skull-cap are sent through the ATMega to MATLAB where after a pass through an FFT the brain waves are converted to mouse scroll wheel output.

There’s a demo video available where you can see spectators screaming at the poor test subject telling him to relax and concentrate on command. You can check that out after the break.

Continue reading “Playing Pong With Your Mind” →