IR Air Conditioner Timer

October 10, 2009 by Caleb Kraft 20 Comments

installed (Custom)

[Tom] has an office job in China. His office is cooled by a small single room air conditioner. In an effort to make his office a little more comfortable, he built this IR timer unit. It cools his office down before he gets there so he doesn’t have to wait for it in the morning. He started by decoding the IR signal from the remote for the unit. He then built this ATiny13 based remote. He notes that the internal clock of this thing isn’t that accurate. power cycling it every day seems to help. It is also pretty cool that he built the unit to not only send the cooling code, but he can switch it to the heating code for the winter.

[thanks Mario]

A Stirring Hack

October 8, 2009 by Devlin Thyne 29 Comments

Stirring Flask

[Oleg] of Circuits@Home and maker of the USB Isolation Board and the USB Host Shield has a new, two-part hack for his chemistry set. In Part 1 of this hack, [Oleg] discusses the method he uses to make a stir bar spin and what types of stir bars work the best. Part 2 discusses the motor control code and circuit. Given the ample amount of capability leftover in the Arduino he used, we would like to see this stirrer paired with a heating element to have a complete hotplate/stirrer. What do you think you could do with or to improve this device?

A Modular Halloween With Grid Beam

October 8, 2009 by Phil Burgess 3 Comments

gridbeam

The fantastic Creatrope blog has a great article on quickly assembling animatronic Halloween gags using salvaged electric motors, pvc pipe, and “grid beam” construction.

Grid beam is a prototyping and building medium that’s like a giant hippie Erector set. You can’t buy grid beam, but with a drill press, a jig, and some square stock you can create your own unlimited supply. It’s ideal for “sketching” and temporary constructions like these Halloween props. After use, everything can be dismantled, stored flat, and later reused for the next [Herbie Hancock] music video creative project. Looks like fun!

The article wraps up with some valuable pointers on getting started with grid beam and where to acquire parts.

Installing A Starscape Ceiling

October 8, 2009 by Mike Szczys 33 Comments

[Mike Galloway] set out to install a lighted starscape in the ceiling of the baby room. We remember first coming across this type of thing at a Planet Hollywood restaurant at least 10 years ago. We’ve always wondered how difficult this type of thing is to install.

This setup involves an LED based illuminator and bundles of fiber optics. [Mike] first mounted the illuminator in the corner of the room at ceiling level and ran the bundles of fiber optics up into the attic. He then used a cordless dremel to drill 1/16″ holes, one for each fiber in the bundle. This translates to a lot of holes! Once everything was in place, he filled the holes with glue to hold the fibers in place, and snipped off the excess from the room-side using a fingernail clipper. We’ve embedded his video of the system in action after the break.

This may take some time, but it seems easy enough and now we know how these ceilings work.

Continue reading “Installing A Starscape Ceiling” →

Halloween Prop: Bigmouth Billy Bass

October 6, 2009 by Caleb Kraft 8 Comments

Back in 2001, the Bigmouth billy bass was still relatively new. Hacking one to record and play back both audio and movement was quite a new feat. You can read all about how they pulled it off. Though most of us agree that this could be done easier now, with off the shelf microcontrollers, this is a great example of constructing your own system to fit the need. We’ve seen a similar hack done very recently with an mbed microcontroller.

There I Fixed It: A Blog About Hacking, Poorly.

October 6, 2009 by Gerrit Coetzee 24 Comments

austinb-ipodmuffler

Thereifixedit.com is a site filled with dubious innovations. Some of them are cool, some of them are clever, and most of them are terrifying. Anyone who has ever stood in front of a broken household appliance with a roll of duct tape, one screw driver with a bit chipped off the flat part, and determination will laugh themselves silly browsing through this site. Maybe some of the ghetto hacks we covered before should be in this list.

[Thanks for the link Dad]

Halloween Props: Low Cost Popup

October 5, 2009 by Caleb Kraft 3 Comments

[youtube=http://www.youtube.com/watch?v=XJoedH9thds]

[Backroads] has put together this nicely detailed writeup explaining how to make a low cost popup prop. He’s using a single pneumatic valve and a home made PVC piston to raise and lower a scary mask. He’s using an off-the-shelf 110v AC valve controller to control the valve. A flickering light, a “screamer” and a fog machine help fill out the project. The result is quite nice. We would be tempted to put a pressure sensor in front of it to optimize the scare timing.